Gravity - LED Switch Green - LED Illuminated Button - Green - DFRobot DFR0789-G

Index: DFR-19910 EAN: 6959420919970
The pushbutton module is additionally equipped with a backlight, which is responsible for the built-in LED. After pressing the module gives a visual feedback in green. Gravity - LED Switch Green is very universal and can be used with micro:bit from BBC or Arduino. It is equipped with self-locking function.
Gravity - LED Switch Green - LED Illuminated Button - Green - DFRobot DFR0789-G
€5.50
€4.47 tax excl.
Waiting time: 4-6 weeks
Only on request
PayPal payment
Square button with illumination Gravity - color:
Manufacturer: DFRobot
Compatibility: Arduino Micro:bit

Product description: Gravity - LED Switch Green - LED backlit button - Green - DFRobot DFR0789-G

Module with a button equipped with an additional backlight, which is responsible for the built-in LED. When pressed, the module gives visual feedback in green. Gravity - LED Switch Green is very universal and can be used with micro:bit from BBC or Arduino. It was equipped with self-locking function. This means that when the button is pressed, the module outputs a high state and the LED lights up. When pressed again, the module outputs a LOW signal and the LED goes off. Switches of this type can be part of the design of backlit keyboards or music playback panels.

W skład zestawu wchodzi także przewód połączeniowy - dedykowany do urządzeń z sygnałem cyfrowym na wyjściu.

The set also includes a connecting cable - dedicated for peripheral devices with digital signal on the output.

Przykład połączenia Gravity - LED Switch z płytką micro:bit od BBC.

Example of connection between Gravity - LED Switch and micro:bit board from BBC.

LED Switch pinout description

  • D - control pin, output signal port
  • "+" - VCC, power supply pin from 3.3 V to 5 V
  • "-" - GND, system ground pin

What is the Gravity connector?

Modules of Gravity series are equipped with PH2.0-3P connector, which allows for quick and convenient connection of elements. The Gravity system does not require soldering, and its use is particularly appreciated in projects based on prototyping. Gravity connector has 3 lines: GND - circuit ground, VCC - power pin and D/S - signal line.

Technical specification Gravity - LED Switch

  • Operating voltage range: from 3.3 V to 5 V (recommended 3.3 V)
  • Output signal type: digital
  • Button type: monostable (self-locking)
  • Connector: Gravity standard (PH2.0-3P)
  • Backlighting: LED
  • Backlight colour: green
  • Supported programming environments: Arduino, Mind+, MakeCode
  • Module dimensions: 27 x 26,5 mm

Contents of kit

  • Gravity - LED Switch Green - green LED lighted button
  • Dedicated connection cable - digital

In our shop you will also find other electrical buttons and switches. We invite you to familiarize yourself with the available range.

Moduł posiada dwa otwory montażowe, za pomocą których możliwe jest wygodne mocowanie.

The module has two mounting holes for convenient fixing.

Switch - type with button
Colour green
LED - color green
Package width 5.6 cm
Package height 2.5 cm
Package depth 6.2 cm
Package weight 0.014 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: