Gravity - LED Switch Blue - LED Illuminated Button - Blue - DFRobot DFR0789-B

Index: DFR-19914 EAN: 6959420919963
The module is equipped with a button manufactured by DFRobot. An additional advantage is the backlight, which is responsible for the built-in LED. When pressed, the button lights up in blue. Gravity - LED Switch Blue is characterized by high versatility - it can be used in conjunction with e.g. micro:bit from BBC or Arduino. Switch is monostable type, equipped with self-locking function.
Gravity - LED Switch Blue - LED Illuminated Button - Blue - DFRobot DFR0789-B
€4.90
€3.98 tax excl.
Available
Shipping in 24 hours
PayPal payment
Square button with illumination Gravity - color:
Manufacturer: DFRobot
Compatibility: Arduino Micro:bit

Product description: Gravity - LED Switch Blue - LED backlit button - blue - DFRobot DFR0789-B

A module equipped with a button manufactured by DFRobot. An additional advantage is the backlight, which is responsible for the built-in LED. When pressed, the button lights up in blue. Gravity - LED Switch Blue is characterized by high versatility - it can be used in conjunction with e.g. micro:bit from BBC or Arduino. Switch is monostable type, equipped with self-locking function. It means, that when the button is pressed, the module outputs high state and the LED lights up. When the button is pressed again, the module produces LOW signal and the LED goes off. Switches of this type can be part of the design of backlit keyboards or music panels.

W skład zestawu wchodzi także przewód połączeniowy - dedykowany do urządzeń z sygnałem cyfrowym na wyjściu.

The set includes also the connection cable - dedicated for peripherals with digital signal on the output.

Przykład połączenia Gravity - LED Switch z płytką micro:bit od BBC.

Example of connection between Gravity - LED Switch and micro:bit board from BBC.

LED Switch pinout description from DFRobot

  • D - control pin, output signal port (low / high state)
  • "+" - VCC, power supply pin from 3.3 V to 5 V
  • "-" - GND, system ground pin

What is the Gravity connector?

Modules of Gravity series are equipped with PH2.0-3P connector, with which you can make extremely fast and convenient connection of elements. The Gravity system does not require soldering, that is why it is so valued by beginners. Its use is particularly useful in projects based on prototyping. Gravity connector has 3 lines: GND - circuit ground, VCC - power pin and D/S - signal line.

Technical specification Gravity - LED Switch

  • Operating voltage range: from 3.3 V to 5 V (recommended 3.3 V)
  • Output signal type: digital
  • Button type: monostable (self-locking)
  • Connector: Gravity standard (PH2.0-3P)
  • Backlighting: LED
  • Backlight colour: blue
  • Supported programming environments: Arduino, Mind+, MakeCode
  • Module dimensions: 27 x 26,5 mm

Kit contents

  • Gravity - LED Switch Blue - blue LED backlight button
  • Dedicated connection cable - digital

In our shop you will also find other electrical buttons and switches. We invite you to familiarize yourself with the available range.

Moduł posiada dwa otwory montażowe, za pomocą których możliwe jest wygodne mocowanie.

The module has two mounting holes for convenient fixing.

Switch - type with button
Colour blue
Package width 5.6 cm
Package height 2.5 cm
Package depth 6.2 cm
Package weight 0.014 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: