Product description: Gravity - fiber optic transceiver module - UART - DFRobot TEL0153
The module is designed for signal transmission. Thanks to complete electrical isolation to prevent electromagnetic interference, it operates at 2,000,000 baud at a distance of up to 10 km . The product is equipped with a lightning protection. It can be used with an optical splitter in the implementation of networks with a star topology (one-to-many star networking). The module is equipped with a Gravity connector. It uses UART communication.
Gravity - fiber optic transceiver module - UART .
Elements placed on the DFRobot TEL0153 module .
Elements on the module board
- Gravity Connector: Uses UART interface.
- PWR LED: power indicator. Lit when the module is powered.
- SD LED : Fiber disconnect indicator. It lights up when the optical fiber is disconnected.
- TX LED : Fiber optic transmission indicator. Flashes while transmitting a signal.
- RX LED : Receiving indicator. Flashes when receiving a signal.
- SC fiber interface.
Module specification
- Supply voltage: 3.3 to 5 V
- Signal voltage: 3.3 to 5V
- Maximum baud rate: 2,000,000 baud
- Communication distance: up to 10 km
- Working Wavelength: 1310 nm
- Fiber type: single mode
- Fiber interface: SC
- Working temperature: 0 ° C to 70 ° C
- Dimensions: 57 x 42 mm
Kit contents
- Gravity - fiber optic transceiver module - UART - DFRobot TEL0153: 1 pc.
- Gravity cable: 1 pc.
Items included in the kit .
