- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
A voltage divider is used, when the measured voltage has a larger value than the AC converter range. The device operates in two ranges, selectable with a switch: from 0.3 V to 12.9 V and from 1.0 V to 43 V (SW10). The output voltage has a value from 0 to 5 V and is proportional to the input voltage. The kit includes a cable adapted to Seeedstudio Base Shield v2.0.
Module supplied with 4-pin cable for Base Shield v2
Specification
- Supply voltage: 4.7 V to 5.3 V
- Measuring ranges:
- Switch SW3: from 0.3 V to 12.9 V
- Switch SW10: from 1 V to 43 V
- Output voltage: proportional to input signal ranging from 0 V to 5 V.
- Accuracy: 99%
- Equipped with 4-pin Grove, raster 2 mm
- Dimensions: 40 x 20 mm
|
The product is compatible with Arduino The manufacturer offers a user guide, together with examples forArduino. |
Connection
The sensor communicates with the microcontroller the analog way. In addition to the connector, Grove offers the 2-pin screwconnector for connecting the measured voltage. Grove connector comprises of the following pins:
| Pin | Description |
|---|---|
| GND | The ground of the system. |
| VCC | Supply voltage from 4.7 V to 5.3 V. |
| NC | Not connected. |
| SIG | The output voltage from 0 to 5 V. |
|
Grove is a series of modules and sensors that are compatible with Base Shield boards working withArduinoandSTM32 Nucleo. |
Useful links |
