Grove - ultrasonic distance sensor 3-350cm

Index: SEE-11360 EAN: 5903351247177

Ultrasonic sensor operating in the range from 3 cm to 350 cm. It is powered with voltage of 5 V. The output is a signal, duration of which is proportional to the measured distance. 

Grove - ultrasonic distance sensor 3-350cm
€5.90
€4.80 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Seeedstudio
Compatibility: Arduino Raspberry Pi

Description

Ultrasonic sensor operating in the range from 3 cm to 350 cm. It is powered with voltage of 5 V. The output is a signal, duration of which is proportional to the measured distance. 

 

The product is compatible with Arduino and Raspberry Pi

Attention!

This product is only available in our market in Poland and cannot be sold to other countries.

Connection

The sensor communicates with the microcontroller in digital form. It has the following pins:

Ultradźwiękowy czujnik odległości 3-350cm

Pin Description
GND The ground of the system - the black wire.
VCC The supply voltage from 3.2 V to 5.2 V - the red wire.
NC Not connected - the white wire.
SIG The signal of the receiver - yellow wire.

Specification

  • Supply voltage: from 3.2 V to 5.2 V
  • Average current consumption: 8 mA
  • Resolution: 1 cm
  • Measuring range: from 3 cm to 350 cm
  • Output: PWM
  • The echo signal: TTL
  • Working frequency: 40 kHz
  • Angle measurement: 15 degrees
  • Operating temperature: -10 °C to 60 °C
  • Dimensions: 50 x 25 x 16 mm
  • Weight: 13 g

Ultradźwiękowy czujnik odległości 3-350cm

Sensor - type distance
Package width 6.9 cm
Package height 9.9 cm
Package depth 1.6 cm
Package weight 0.015 kg

Be the first to ask a question about this product!

Product reviews

Grove - ultrasonic distance sensor 3-350cm

5/5

Average grade

5

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Detlef 07.08.2023 Confirmed purchase Translated review
Very good quality!
Jacek P. 10.07.2022 Confirmed purchase Translated review
Grove makes it easier, but if someone can connect the cables, it is cheaper to find a better proximity sensor without facilities such as a grove connector.
Ondřej G. 10.07.2022 Confirmed purchase Translated review
It works flawlessly. It only needs one GPIO. I enjoy in CircuitPython.
Jerzy Z. 20.10.2021 Confirmed purchase Translated review
When you "use" the Grove system it is very convenient. It works based on a library and you can easily obtain data.
Kacper S. 19.04.2021 Confirmed purchase Translated review
powerful sensor, it's nice that it flashes on one pin to switch input / output and is 3.3V-friendly, so plug'n'play for raspberry

Customers who bought this product also bought:

Products from the same category: