• EOL

Grove - UART GGC2330-O2 Oxygen sensor - pre-calibrated, electrochemical - Seeedstudio 101020912

Index: SEE-19504 EAN: 5904422368869
Module based on high quality, electrochemical oxygen sensor GGC2330. It uses three electrodes, an electrochemical gas sensor and a high quality microprocessor to measure. The Grove module also has a built-in temperature sensor, which can correct measurement error caused by temperature differences and increase the accuracy of oxygen measurement. The unit has been factory calibrated. It communicates with the microcontroller via UART or analog interface.
Grove - UART GGC2330-O2 Oxygen sensor - pre-calibrated, electrochemical - Seeedstudio 101020912
€88.50
€71.95 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Seeedstudio
Compatibility: Arduino

Attention!

The product has been discontinued. Check other products in category.

Product description: Grove oxygen sensor UART GGC2330-O2 - calibrated, electrochemical - Seeedstudio 101020912

Module based on the high quality, electrochemicaloxygen sensorGGC2330. It uses three electrodes,an electrochemical gas sensorand a high quality microprocessor to measure. TheGrovemodule also has a built-intemperature sensor,which can correct measurement error caused by temperature differences and increase the accuracy of oxygen measurement. The unit has beenfactory calibrated. The sensor is also equipped with a powerful microprocessor that allows communication using digital and analog interfaces. It communicates with the microcontroller usingUARToranaloginterface.

The manufacturer has prepared auser guidealong with sample code forArduino.

Elektrochemiczny czujnik tlenu

Grove electrochemical oxygen sensor.

Elektrochemiczny czujnik tlenu

Grove module with electrochemical oxygen sensor GGC2330.

What is oxygen sensor?

The Grove Oxygen Sensor is a module equipped with an electrochemical GGC2330 sensor, which in combination with a microcontroller is capable of measuring oxygen concentrations in the range of0% to 25%by volume with a resolution of 0.1%. It communicates via a serial UART or analog interface. Powered by5 V, it consumes up to 10 mA of current during operation. Thanks to the Grove connector used, it is possible to quickly and seamlessly connect the sensor to a master module equipped with the same interface.

  • Avoid contact with organic solvents (including silica gel and other adhesives), paints, chemicals, oils and gases of high concentration.
  • The module must not be subjected to shock or vibration.
  • The module has a warm-up time of 5 minutes when first activated and more than 24 hours when not in use for a long period of time.
  • Do not install the module in an environment with strong air convection.
  • Do not place the module in a high concentration of organic gas for a long time.
Oxygen sensor specification
Gas measurement O2
Sensor type electrochemical GGC2330-O2
Supply voltage 5 V ± 0.1 V
Current consumption up to 10 mA
Communication UART (3 V), analogue
Measuring range 0% to 25% vol.
Resolution 0.1% vol.
Operating conditions -20°C to 25°C / 15% to 90% RH
Storage conditions -20°C to 50°C / 15% to 90% RH
Sensor lifetime 2 years
Dimensions ø 23,5 mm x 24,5 mm
Voltage to 5.0 V
Voltage from 5.0 V
Interface UART
Sensor - type air quality
Package width 14 cm
Package height 8.5 cm
Package depth 3 cm
Package weight 0.039 kg

Be the first to ask a question about this product!

Product reviews

Grove - UART GGC2330-O2 Oxygen sensor - pre-calibrated, electrochemical - Seeedstudio 101020912

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: