• EOL

MPU-6050 3-axis accelerometer and I2C gyroscope module - SparkFun SEN-11028

Index: SPF-01632 EAN: 5904422300869

Sensor for measuring acceleration and angular velocity in three axes. It is a combination of 3-axis accelerometer and gyroscope. It is characterized by simple operation, it communicates via the I2C bus.

MPU-6050 3-axis accelerometer and I2C gyroscope module - SparkFun SEN-11028
€33.90
€27.56 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: SparkFun
Compatibility: Arduino Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Specification

  • Supply voltage: 2.3 V - 3.4 V
  • Current consumption: approx. 5 mA
  • Three axes: X, Y, Z
  • Communication interface: I2C (TWI) - 400 kHz
  • Resolution: 16-bits for each axis
  • Measuring ranges (configurable):
    • Accelerometer: ±2g, ±4g, ±8g, ±16g
    • Gyroscope: ±250, ±500, ±1000, ±2000 °/s
  • Board sizes: 20,3 x 12,7 x 2,5 mm
  • Weight: 0.9 g

 

Description

Module, using a 3-axis accelerometer and gyroscope, can measure the acceleration and angular velocity in three-dimensional space. The system MPU has a hardware unit DMP (Digital Motion Processor) that allows recalculation of the data to the position relative to the Earth.

 

For communication with the central unit, the popular I2C bus (TWI) is used. The module has, necessary for the correct operation of the system, passive elements. Leads are popular goldpin connectors, for connecting the sensor via wires or for connecting directly to breadboard. Manufacturere has prepared a libraryandsample programin C language.

 

Moduł MPU-6050 - 3-osiowy akcelerometr i żyroskop I2C     

 

Since the maximum voltage, with which the system works, is 3.4 V, to work with Arduino, required is a voltage converter. The exceptions are the modules, operating with voltages of 3.3 V, for example,Arduino Pro Mini 328 - 3.3 V/8 MHz.

The product is compatible with Arduino

The manufacturer providessample codealong with the connection scheme for users ofArduino.

 

Pins

The sensor has ten pins for mounting goldpin connectors - 2.54 mm pitch (not included).

 

Name Description
VDD Supply voltage from 2.3 V to 3.4 V.
GND The ground of the system.
INT Output of the external interrupt - open drain (details in documentation)
FCYNC The sync output. It is not used, it should be connected to ground (e.g. creating a SJ3 jumper on the board).
SCL Clock line of the I2C bus (TWI).
SDA The data line of the I2C bus (TWI).
VIO Outputs of the voltage of the high logic status.
CLK Clock output.
ASCL Clock line of the I2C bus (TWI) for connecting an external magnetometer.
ASDA The data line of the I2C bus (TWI) for connecting an external magnetometer.

 

 

The set does not contain goldpinstrap, it can be purchased separately.

 

 

Package width 5 cm
Package height 0.5 cm
Package depth 9 cm
Package weight 0.002 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: