HiFiBerry DAC+ RCA standard - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero

Index: RHF-04875 EAN: 4260439550057

Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device of high-quality, DAC Burr-Brown chip has a resolution of 24-bits and runs at a frequency of 192 kHz. The advantage of this board is a built-in, hardware controller of sound volume with support for applications such as mixer.

HiFiBerry DAC+ RCA standard - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
€40.90
€33.25 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: HiFiBerry
Compatibility: Raspberry Pi

Description

Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device of high-quality, DAC Burr-Brown chip has a resolution of 24-bits and runs at a frequency of 192 kHz. The advantage of this board is a built-in, hardware controller of sound volume with support for applications such as mixer.

The device has a connector suitable for the GPIO pinsof the Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero. Minicomputer must be purchased separately.

Key features

  • Built-in two RCA slots.
  • High quality DAC Burr-Brown converter provides a resolution of 24 bits and operates at speeds up to 192 kHz.
  • It has a built-in sound level controller which can be controlled with a mixer type programs, for example, the ALSA mixer.
  • Board has special connectors for the GPIO of the Raspberry Pi, to connect it, you don't need any extra wires or adapters. It works with minicomputer in version 4B, 3B+, 3B, 2B, A+, B, Zero.
  • The device is powered with a Raspberry Pi, it does not require additional power supply.
  • It has a built-in EEPROM memory, typical for a standard HAT, thanks to which, in the future, the Raspberry Pi will automatically recognize the device. This function is not supported yet.
  • The device works with the Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero.
  • The weight of the board is 20 g, dimensions - 55 x 65 x 15 mm.

 

Detailed description can be found onthe website of the manufacturer.

 

The introduction of modules from the series HiFiberry.

Connection

HiFiBerry installation is very simple, you just need to insert a memory card into the card reader of the computer, then run the configuration program and select the appropriate board and the operating system. The app will automatically install the operating system with appropriate driver. After transfering the card to Raspberry Pi, HiFiberry board will already be properly configured.

 

Description of the installation for a finished operating system can be found at this address, the list of supported systems is available on the website of the manufacturer.

  

  

The configuration program HiFiBerry is very simple and intuitive.

Video

 

Video facilitating the selection of a right version of the HiFiBerry.

   

Online, you can find the system Max2Play for HiFiBerry which allows you to create configuration multiroom, using several models of the Raspberry. More information on blog MalinowePi.

Accessories

In our offer, you will finddedicated cases for HiFiBerry and Raspberry Pi.

Obudowa Raspberry Pi

 

Minicomputer Raspberry Pi with HiFiBerry in a dedicated case.

 

Sound card - access to GPIO yes
Sound card - type DAC
Sound card - oscillators Raspberry Pi clock
Sound card - Chipset Burr-Brown
Sound card - Connectors 2x RCA
Sound card - output analog Line out
Package width 7 cm
Package height 9 cm
Package depth 2.5 cm
Package weight 0.031 kg

Be the first to ask a question about this product!

Product reviews

HiFiBerry DAC+ RCA standard - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero

5/5

Average grade

6

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: