• EOL

Simple High-Power 18v15 - USB 30V/15A motor driver - assembled - Pololu 1376

Index: PLL-00522

Easy-to-use single-channel driver for DC motors. It communicates via the computer's USB port, UART TTL interface, analog signal or RC radio interface. The supply voltage is from 5.5 V to 30 V. Continuous current up to 15 A.

Simple High-Power 18v15 - USB 30V/15A motor driver - assembled - Pololu 1376
€47.50
€38.62 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Attention!

The sale of the product has been completed. Check out the others inthis category.

Product description: Pololu Simple High-Power 18v15 - USB motor driver 30 V / 15 A

The manufacturer provides a detaileduser guide.

Main features

  • Easy-to-use bidirectional DC motor controller
  • Power supply: 5.5 V to 30 V (18v7, 18v15, 18v25 versions) and up to 40 V (24v12, 24v23)
  • From 7A to 25A continuous current depending on the version
  • Four communication protocols:
    • USB - direct connection to a computer
    • TTL - serial interface for connection with e.g. a microcontroller
    • Radio signal (RC)
    • Analog input (0 - 3.3 V) - connection of a potentiometer or joysticks
  • Simple configuration via USB (Windows 7, Vista, XP, Linux)
  • Detailed information is available in theinstruction manual
For systems using a 24 V supply voltage, we recommend the use of a24v12or24v23 driver. When using18v17,18v15and18v25controllers, there is a risk that the voltage at some moments will exceed the permissible value of 24 V (e.g. when the batteries are fully charged), which may cause permanent damage to the system.

Additives:

  • Manualcontaining sample connections and source codes
  • Adjustable start and maximum speed
  • Option to prevent accidental starting of the engine
  • Adjustable PWM frequency from 1 kHz to 22 kHz
  • Can be turned off when the supply voltage is too low
  • LED diode indicating the appearance of errors

Exemplary diagram of the controller connection.

Communication

HighPower series controllers can communicate through three interfaces:

Computer USB port

  • Communication with a computer through a virtual COM port
  • Sample codesin C #, Visual Basic, .NET, C ++
  • Optional security (CRC control, timeout)
  • Automatic detection of the baud rate (from 1200 bps to 500 kbps)

Remote Control - modeling apparatus

  • Frequencies from 10 to 333 Hz
  • Adjustable parameters for RC signal
  • Two channels
  • Possibility to power the receiver from the BEC system (BEC jumper)

Analog interface

  • Resolution: 12 bits
  • Voltage range: 0 to 3.3V
  • Two analog channels

List of regulators


18v7

18v15

24v12

18v25

24v23
Voltage:30 V30 V40 V30 V40 V
Recommended voltage:24 V24 V34 V24 V34 V
Continuous current:7 A.15 A.12 A.25 A.23 A.
Width:28 mm28 mm28 mm31 mm31 mm
Length:53 mm53 mm53 mm58 mm58 mm
Weight*:7 g7 g7 g12 g12 g

* - Weight without connectors.

Specification

  • The supply voltage of the motors: 5.5 V - 30 V
  • Continuous current: up to 15 A.
  • The maximum frequency of the PWM signal: 21.77 kHz
  • Supply voltage of the logic part: up to 3.3 V
  • Digital inputs are 5V tolerant
  • Number of channels: 1
  • Dimensions: 53.3 x 27.9 x 12.7 mm
  • Weight: 7 g
Voltage to 5.5 V
Voltage from 30.0 V
Current 15 A
Channels 1
Package width 7 cm
Package height 3 cm
Package depth 8.5 cm
Package weight 0.025 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: