• EOL

Khadas Edge-V Pro - Rockchip RK3399 Cortex A72/A53 + 4GB RAM/32GB eMMC

Index: KHD-14670 EAN: 5904422342616

Khadas Edge-V Pro minicomputer with a powerful Rockchip RK3399 Dual-CoreCortex-A72 + Quad-Core Cortex-A53processor. It has 4GB of DDR4 memory, 32GB of eMMC storage, built-in WiFi and Bluetooth 5.0, along with two USB Type-C connectors, one USB 3.0 connector, one USB 2.0 connector, 40 GPIOs, sensors, a microSD card slot, as well as an M.2 drive, Ethernet port, HDMI, IR receiver, and buttons.

Khadas Edge-V Pro - Rockchip RK3399 Cortex A72/A53 + 4GB RAM/32GB eMMC
€248.90
€202.36 tax excl.
The minimum purchase order quantity for the product is 50.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Khadas

Attention!

The product has been discontinued. Check other products in category.

Product description: Khadas Edge-V Pro - Rockchip RK3399 Cortex A72/A53 + 4GB RAM

Khadas Edge-V Basic minicomputer with powerful Rockchip RK3399 Dual-Core Cortex-A72 + Quad-Core Cortex-A53 processor. It has 4GB of DDR4 memory, 32GB of eMMC storage, built-in WiFi and Bluetooth 5, and features two USB Type-C connectors, one USB 3.0 connector, one USB 2.0 connector, 40 GPIOs, gesture sensor and IMU sensor, microSD card slot, as well as an M.2 drive, Ethernet port, HDMI, IR receiver, and three buttons.

Operating Systems for Khadas Edge-V

The Khadas Edge-V minicomputer runs Android, LibreELEC, Ubuntu, and Debian. The system can be uploaded to a microSD card, M.2 drive or directly to the minicomputer's internal memory.

Operating systems can be downloaded from the manufacturer's website.

What do I need to run the Khadas minicomputer?

Khadas Edge-VKhadas Edge-V Pro Minicomputer.

Communication in Khadas Edge-V

The minicomputer has the basic communication interfaces found in PC class computers. The user has:

  • two USB A + USB type Cconnectors, under which you can connect, for example, a mouse, keyboard or flash drive. If it turns out that there are not enough sockets, you can increase their number by using an external USB HUB.
  • Ethernet Gigabit socket- the possibility of a direct connection to LAN.
  • WiFi module - allows you to communicate with the wireless network 802.11b/g/n/ac.
  • Bluetooth 5.0 module - allows data transmission via a popular interface.
  • GPIO x 40 pin - . General purpose outputs/inputs, which can be used to operate LEDs, buttons, motor drivers. Among them there are pins supporting interfaces: USB, I2C, SPI, I2S, SPDIF, ADC, STM8S MCU IOs.
  • microSD slot - Slot for microSD memory card, on which operating system may be installed.
  • HDMI connector - transmits image to monitor.
  • M.2 slot - allows to connect high-speed M.2 SSD drives.
  • display and touch panel connector - allows you to connect the display with MIPI-DSI connector and touch panel with 10-pin FPC connector.
  • Camera connector - the minicomputer has two MIPi-CSI connectors for connecting two 13 MPx cameras.

Opis złącze Khadas Edge-V

Khadas Edge-V connector description.

Power supply in Khadas Edge-V

The chip uses USB type C connector as a power source. The manufacturer recommends that the voltage given to the connector is 5.0 V, while the current capacity of the power supply used should be at least 2.0 A. In our offer you will find power supplies meeting these parameters, for example: Extreme 3.1 A power supply.

Khadas Edge-V

Ports in Khadas Edge-V.

Khadas Edge-V Basic specification and comparison

Basic information
Raspberry Pi 4 B Khadas Edge-V
Model Raspberry Pi 4 model B Khadas Edge-V Pro
Release 6 - 2019 r. 2018 r.
Technical specification
Core Quad-Core ARM Cortex-A72

Quad-Core ARM Cortex-A54

Dual-Core ARM Cortex-A72

Operating systems

Linux Raspbian

Windows 10 loT

Debian

Ubuntu

Android etc.

Clocking 1.5 GHz 1.5 GHz + 1.8 GHz
RAM

Three versions

  • 2GB LPDDR4
  • 4GB LPDDR4
  • 8GB LPDDR4
4GB DDR4
Memory microSD card

microSD card

32 GB eMMC memory

M.2 solid state drive

GPIO socket

40-pin connector (2x20 pin)

raster 2.54 mm

Connector 40-pin (2x20 pin)

2.54 mm pitch

Power supply
  • 5.0 V / 3 A
    via USB C
  • 5 V via GPIO
  • PoE via
    additional cap

9 V to 20 V / 2 A - USB PD

USB type C

Board dimensions 85 x 56 x 17 mm 82 x 58 x 13.5 mm
Interfaces
USB interface

2x USB 2.0 - type A socket

2x USB 3.0 - type A socket

1x USB 2.0 - socket type A

1x USB 3.0 - type A socket

Network interface Ethernet 100/1000 Mbps port

10/100/1000 Mbps Ethernet port

RTL8211FD

WiFi interface

Dual Band 2.4 GHz and 5 GHz

802.11 b/g/n/ac

AP6398S

802.11a/b/g/n/ac
2X2 MIMO with RSDB

Bluetooth Low Energy, BLE 5 Bluetooth 5.0
Camera CSI slot CSI slot
Touchscreen display DSI socket DSI socket
Video

2 x microHDMI

H.265 4K 60 fps

H.264 1080p 30 fps

OpenGLES 1.1, 2.0, 3.0

HDMI 4K
Communications UART, SPI, I2C, GPIO

USB, I2C, SPI, I2S, SPDIF, ADC, STM8S MCU IOs

Additional -

Gesture sensor: APDS-9960

IMU sensor: ICM-20602

UC - Microcontroller RK3399
UC - Core Cortex A53/A72
UC - RAM 4 GB
UC - core 6. Hexa Core
UC - Digital pins 40
UC - External memory eMMC 32GB
UC - freq 1.5 + 1.8 GHz
UC - Ethernet yes
UC - WiFi yes
UC - USB 2x USB
UC - microSD yes
UC - Bluetooth yes
UC - HDMI yes
UC - I2C yes
UC - UART yes
UC - Connector USB typ C
UC - SPI interface yes
UC - LCD interface yes
UC - Camera interface yes
UC - Linux yes
UC - Android yes
UC - Windows no
Package width 9.3 cm
Package height 2.1 cm
Package depth 6.7 cm
Package weight 0.065 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: