- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Khadas Edge Basic - Rockchip RK3399 WiFi, Bluetooth Cortex A72 / A53 + 2 GB RAM / 16 GB eMMC
Khadas Edge Basic Minicomputer is equipped withRockchip RK3399 Dual-core A72 1.8 GHz and Quad-core A53 1.5 GHzprocessor, as well as2 GB of RAMand16 GB of eMMC memory. The module is also equipped withWiFi AP6356SandBluetooth 4.1. On the board there are also: Ethernet Gigabit, HDMI, USB 3.0, USB 2.0, 314-pin contact connector in MXM3 standard. Powered by5 V to 20 VviaUSB type Cconnector.
Operating system for Khadas Edge
The device works with operating systems such as: Android Oreo, Ubuntu 18.4, Debian 9.0 and more. The system can be uploaded directly to the internal memory of the minicomputer.
|
Operating systems can be downloaded fromthe manufacturer's website. |
The contents of the Khadas Edge.What do I need to run the Khadas minicomputer?
- Powersupply unit with USB plug type C- from 5 V to 20 V (recommended 5 V) with current capacity of 2 A. The device has a USB C 3.0 connector with PD support.
- HDMI cable- to connect the screen.
- Mouse and keyboard- to control and enter data into the device.
Communication in Khadas Edge
The layouton the Khadas Edge.
Front (blue markings):
| Designation | Element | Description |
|---|---|---|
| 1 | USB A | USB 3.0. |
| 2 | USB C | USB 3.0, Display Port V1.2, input 5 V to 20 V (USB PD), can be used for system updates. |
| 3 | HDMI 2.0 | Female Type A, up to 4K@60 Hz, HDCP 2.2. |
| 4 | USB C | USB C with power input from 5 V to 20 V (USB PD). |
| 5 | USB A | USB 2.0. |
| 6 | Fan connector | 4-pin connector using PWM. |
| 7 | Reset button | Forcing the plate to reset. |
| 8 | Function button | Press 3 times for 2 seconds to enter Mask mode. |
| 9 | Power button | Used to run the plate. |
| A | 314-pin connector | Used to place the plate in theCaptain extension. |
| B | I-PEX connector | Connector for connecting an antenna for WiFi / Bluetooth. |
| C | I-PEX connector | Connector for connecting an antenna for WiFi / Bluetooth. |
Rear (red markings):
| Designation | Element | Description |
|---|---|---|
| 1 | Li-Pol battery connector | It is used to power the module from theLi-Pol battery. |
| 2 | Second WiFi / Bluetooth pad | Additional pad for mounting a WiFi / Bluetooth antenna. |
| 3 | Second WiFi / Bluetooth pad | Additional pad for mounting a WiFi / Bluetooth antenna. |
| 4 | Mounting area M2x4 | Used to mount a heat sink or extension plate. |
| 5 | FPC B connector | 10-pin, 0.5 mm raster, USB, I2S (8 channels), I2C, MCU IO. |
| 6 | FPC A connector | 10-pin, raster 0.5 mm, UART, I2C, SPI, SDMMC, ADC, PWM, I/O, GPIO |
| 7 | M-Register | Allows eMMC to enter MaskMode. |
Power supply in Khadas Edge
The system uses aUSB type Cconnector as its power source. The manufacturer recommends that the voltage given on the connector should be5.0 V, while the current capacity of the power supply used should be at least 2.0 A. In our offer you will findpower supplies meeting these parameters. The module can also be powered viaa Li-Pol battery, via a dedicated connector.
Khadas Edge.Khadas Edge Basic specification and comparison
| Basic information | ||
|---|---|---|
 |
 |
|
| Model | Raspberry Pi 4 model B | Khadas Edge Basic |
| Edition | 6 - 2019 r. | 2018 r. |
| Technical specification | ||
| Core | Quad-Core ARM Cortex-A72 | Quad-Core ARM Cortex-A53 Dual-Core ARM Cortex-A72 |
| Operating systems | Linux Raspbian Windows 10 loT |
Debian Ubuntu Android etc. |
| Clocking | 1.5 GHz | 1.5 GHz + 1.8 GHz |
| Memory RAM | Three versions
|
2 GB DDR4 |
| Memory | microSD card | 16 GB eMMC memory |
| GPIO socket | 40-pin connector (2x20 pin) raster 2.54 mm |
Connector FPC A 10-pin raster 0.5 mm FPC B connector 10-pin raster 0.5 mm 314-pin MXM3 connector |
| Power supply |
|
5 V to 20 V / 2 A - USB PD USB type C |
| Dimensions of the tiles | 85 x 56 x 17 mm | 82 x 57.5 x 5.7 mm |
| Interfaces | ||
| USB interface | 2x USB 2.0 - socket type A 2x USB 3.0 - socket type A |
1x USB 2.0 - socket type A 1x USB 3.0 - socket type A |
| Network interface | Ethernet port 100/1000 Mbps | 10/100/1000 Mbps Ethernet port RTL8211FD |
| WiFi interface | Dual Band 2.4 GHz and 5 GHz 802.11 b/g/n/ac |
AP6356S 802.11a/b/g/n/ac 2X2 MIMO |
| Bluetooth | Low Energy, BLE 5 | Bluetooth 4.1 |
| Camera | CSI socket | - |
| Touchscreen display | DSI socket | - |
| Video | 2 x microHDMI H.265 4K 60 fps H.264 1080p 30 fps OpenGLES 1.1, 2.0, 3.0 |
HDMI 4K |
| Communication | UART, SLEEPING, I2C, GPIO | USB, I2C, SPI, I2S, SPDIF, ADC, STM8S MCU IOs |
| Additional | - | Tensorflow, Android NN |
