TOF laser distance sensor -8m - UART/CAN - DFRobot SEN0337

Index: DFR-16577 EAN: 6959420916528

Laser sensor based on ToF (Time of Flight) measurement technology. It detects objects in the range from 0.01 m to 5 m with an accuracy of 1.5 cm. The measuring resolution is 1 mm. The sensor uses a serial UART or CAN interface for communication. It is powered by 5 V. The sensors can be connected in a cascade.

TOF laser distance sensor -8m - UART/CAN - DFRobot SEN0337
€31.00
€25.20 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino

Product description: TOF laser distance sensor - 5 m - UART/CAN.

Laser sensor based on ToF(Time of Flight)measurement technology.It detects objects in the range from 0.01 m to 5 m withan accuracy of 1.5 cm. The measuring resolution is1 mm. The sensor uses a serialUART or CANinterface for communication. It is powered by5 V. The sensors can be connected in a cascade.

Zawartość zestawu czujnika odległości TOFContents of the TOF distance sensor kit.

The sensor's viewing angle (FoV) can be adjusted from 15° to 27°. The user has two communication interfaces to choose from: UART and CAN. These types of sensors are used in robots and drones.

Zasada działania czujnika TOF

The principle of the TOF sensor.

Cascade connection of TOF sensors

Unlike other distance sensors, this sensor uses two identical communication interfaces. When an ID is set for each sensor and the sensors are combined in multiple series, the sensor information can be read from one interface. TheUARTinterface supportsup to 8sensors connected in cascade, while the CAN interface supportsup to 7sensors.

Przykład połączenia kaskadowego

Example of a sensor cascade connection.

Arduino compatible product

The manufacturer provides auser guide forArduino users.

Distance sensor leads

The TOF distance sensor uses a serial UART or CAN interface for communication. It is powered from 3.7 V to 5.2 V.

Przykład podłączenia z Arduino

Example of sensor connection.

Cable colour Description
Black GND - mass of the system.
Red VCC - supply voltage 3.3 V / 5 V.
Blue Serial interface receiver / CAN bus.
Green Serial interface transmitter / CAN bus.

TOF distance sensor specification

  • The tension of work: 5 V
  • Supply voltage: 3.7 V to 5.2 V
  • Current consumption: 0,06 A
  • Power consumption: 290 mW (active UART output, long range detection, 5 V supply)
  • The interface:
    • UART (two interfaces can be used as UART at the same time, 3.3 V TTL, default band frequency 921600 bps)
    • CAN (two interfaces can be used as CAN at the same time, default frequency 1 Mbps)
  • Maximum number of sensors connected in cascade:
    • 8 for UART
    • 7 for CAN
  • Blind zone: 1 cm
  • Measuring range:
    • short range: from 0.012 m to 2.16 m
    • average range: 0.012 m to 3.6 m
    • long range: from 0.01 m to 5 m
  • Typical accuracy:
    • short range: ± 1 cm,standard deviation below 0.3 cm
    • average range: ± 1cm, standard deviation below 1,5 cm
    • long range: ± 1,5 cm, standard deviation less than 0,5 cm at 0,013 m and less than 8 cm at 3,5 m
  • The length of the emitted wavelength: 940 nm
  • Viewing angle (FoV): adjustable from 15° to 27°
  • Dimensions: 35.58 x 12 x 80.5 mm
  • Weight: 2,7 g

Wymiary

Sensor dimensions.

Voltage to 3.7 V
Voltage from 5.2 V
Sensor - type distance
Sensor - distance to 500 cm
Sensor - distance from 1 cm
Package width 6 cm
Package height 1 cm
Package depth 6.5 cm
Package weight 0.011 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: