- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Graphic color display TFT LCD 1,44'' 128x128px - SPI
Graphic LCD display with a diagonal of 1.44" and a resolution of 128 x 128 px. DriverILI9163C.Thanks to the integrated stabilizer circuit can be powered with voltage from 3.3 to 5 V. The outputs work only with a voltage of 3.3 V, supplying a higher value may damage the module. However, this is not a problem because, for systems operating with 5 V and above you just need to apply avoltage converter.
The communication interface is the SPI bus. The device consumes approx. 30 mA. Board size: 45 x 33 mm.
The outputs are solderedgoldpin connectors- 2.54 mm raster, which provide the connection of the display via wire or plug attached to the contact plater.
|
The product is compatible with Arduino In GitHub you can findthe Arduino library. Keep in mind that the system works with voltage of 3.3 V. For popular modules likeArduino Uno, you need to apply aconverter. |
Connection
The system has eight outputs type goldpin. For operation of the module with Arduino with the existinglibraryit is necessary to connect the contacts in accordance with a column marked Arduino PIN.
| Pin | Description | Arduino PIN |
|---|---|---|
| LED | The screen backlight. | 3.3 V or PWM |
| SCK | Bus clock line. Works with a voltage of 3.3 V. | 13 |
| SDA | Bus communication data line. Works with a voltage of 3.3 V. | 11 |
| A0 | Pin configuration | 9 |
| RESET | The system reset. | 3.3 V |
| GND | The ground of the system. | GND |
| VCC | Supply voltage: from 3.3 V to 5.0 V. | 3.3 V |
|
Attention! Outputs are working with a voltage of 3.3 V. Supplying 5 V can permanently damage the chip. If your microcontroller is powered by 5 V, you need to applythe voltage converter. |
Useful links |
