• EOL

Grove - RGB LED Ring WS2813 x 42 LEDs - 59 mm - Seeedstudio 104020173

Index: SEE-15557 EAN: 5903351246941

Ring equipped with 42individually addressed RGB WS2813 LEDs . One microcontroller pin is enough to operate the module. The outer diameter of the circle is 58,5 mm. The rings can be cascaded together.

Grove - RGB LED Ring WS2813 x 42 LEDs - 59 mm - Seeedstudio 104020173
€23.50
€19.11 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Seeedstudio
Compatibility: Arduino Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Description: Grove - ring of RGB LED WS2813 x 42 diodes - 59 mm - Seeedstudio 104020171.

The module is equipped with 42individually addressedRGB WS2813LEDsin theform of a ring. One microcontroller pin, e.g. Arduino, is sufficient to operate the module. The LEDs are placed at equal distances on a board with a diameter of 29 mm.

The LED rings can be connected together in a cascade through soldering pads on the board. If several boards are connected together, the signal can be connected to the SIG pin of the Grove connector or to the DIN pin on the board. However, the VCC connector of the Grove interface has insufficient capacity to supply more modules, the VIN connector on the module must be used for supply.

Arduino compatible product

The manufacturer has prepared auser guidewith a sample code for Arduino users.

Schemat połączenia kaskadowego pierścieni LEDAn example of a cascade connection of LED rings.

Module outputs

The module has been equipped with 4-pin Grove connector, which greatly facilitates connection with the main module e.g. ArduinousingBase Shield overlay.

Wyprowadzenia modułu

Main features of the RGB LED ring

  • 256 grey levels, 256*256*256=16777216 displayed colours
  • Built-in control system in 3535 components
  • Supports 3.3 V and 5 V power supply
  • Wires with two signals, interrupting one diode does not interrupt the entire module

Punkt przerwania

As long as two or more adjacent LEDs are not damaged, the remaining LEDs will operate normally.

RGB LED module specification

  • Power supply voltage: 3.3 V or 5 V
  • Number of diodes: 42
  • Kind of diodes: WS2813
  • Idle current consumption: 0.7 mA / LED
  • Average power consumption: 16 mA / LED
  • USB type C connector: for 5 V power supply
  • Frequency of refreshment: 2 kHz
  • Reset time: up to 280 μs
  • Number of displayed colors: 16777216
  • Operating temperature: -25°C to 85°C
  • Storage temperature: from -40°C to 105°C
  • Dimensions: diameter: 29 mm

Voltage to 3.3 V
Voltage from 5.0 V
LED - color RGB
LED - type WS2813
LED - digital yes
LED - LEDs 4
LED lens clear
LED wavelength RGB
LED shape circle
Package width 12.6 cm
Package height 15.2 cm
Package depth 1.3 cm
Package weight 0.025 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: