Ring LED RGB 7 x WS2812 5050 - soldered connectors

Index: ZES-19356 EAN: 5904422368074
Module in a form of ring consisting of 7 individually addressable RGB LEDs based on popular WS2812 chip in 5050 standard. The board is equipped with two mounting holes. To operate the module it is enough to use only one microcontroller pin, e.g. Arduino or Raspberry Pi module. Outside diameter of the circle is 23 mm. The module is equipped with goldpin connectors allowing connection to the microcontroller using connection wires.
Ring LED RGB 7 x WS2812 5050 - soldered connectors
€2.50
€2.03 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: OEM

Product description: RGB LED Ring 7 x WS2812 5050 - soldered connectors

Module in a form of ring consisting of7 individually addressable RGB LEDsbased on popularWS2812chip in 5050 standard. The board is equipped with two mounting holes. To operate the module it is enough to use only one microcontroller pin, e.g.ArduinoorRaspberry Pimodule. Outside diameter of the circle is23 mm. The module is equipped withgoldpinconnectors enabling connection to the microcontroller using connection wires. The ring is powered by5 V.Each diode consumes up to18 mAof current, which in this case gives a total value of about 130 mA. The communication protocol used allows the diodes to be connected in series. The next chain should be connected to the output connector, connecting respectively 5V, GND and DOUT with DIN. The manufacturer notes that when using more than 500 diodes, there may not be enough RAM in theArduino Unochip.

Pierścień LED RGB WS2812RGB LED ring, 7 WS2812 LEDs.
Wyprowadzenia pierścieniaLeads of the WS2812 LED ring. The module has a goldpin soldered on.

Connecting the RGB LED ring

The module is equipped with four pins. For proper operation it is enough to use one microcontroller pin. The device allows for serial connection of more modules.

  • GND- ground of the module
  • 5 V- supply voltage, 18 mA current per one diode
  • Data IN- digital control signal from the microcontroller
  • Data OUT- output for connecting another ring

Product compatible withArduino

You can findArduino library on GitHubfor NeoPixel modules along withconnection examples.

Specifications of WS2812 LED ring

  • Supply voltage: 5 V
  • Current consumption:
    • for one diode: 18 mA
    • total: about 130 mA
  • LEDs used: RGB LED WS2812(documentation)
  • Number of diodes: 7
  • Soldered goldpin connectors
  • Outside diameter: 23 mm
Pierścień LED WS2812RGB LED WS2812 ring.
Nominal power 1.0 W
LED - color RGB
LED - type WS2812B
LED - digital yes
LED - LEDs 7
LED lens clear
LED wavelength RGB
Package width 5 cm
Package height 0.3 cm
Package depth 8 cm
Package weight 0.003 kg

Be the first to ask a question about this product!

Product reviews

Ring LED RGB 7 x WS2812 5050 - soldered connectors

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: