RGB LED strip SJ-10030-APA102 IC - digital, addressed - IP65 30LED/m, 7.2W/m, 5V - 1m

Index: ODS-13388 EAN: 5904422320614

RGB LED strip powered with a voltage of 5 V with a removable silicone case. Consumes power: 7.2 W/m, the density is 30 diodes per meter. The temperature of white color light can be adjusted from 2200 K cool to 7500 K warm, the degree of protection is IP65. Price per pack, which includes a tape with length of 1 meter.

RGB LED strip SJ-10030-APA102 IC - digital, addressed - IP65 30LED/m, 7.2W/m, 5V - 1m
€14.50
€11.79 tax excl.
The minimum purchase order quantity for the product is 10.
Waiting time: 4-6 weeks
Only on request
PayPal payment
Manufacturer: OEM
Compatibility: Arduino Raspberry Pi

Description

RGB LED strip powered with a voltage of 5 V with a removable silicone case. Consumes power: 7.2 W/m, the density is 30 diodes per meter. The temperature of white color light can be adjusted from 2200 K cool to 7500 K warm, the degree of protection isIP65. Price per pack, which includes a tape with length of 1 meterThe brightness is 210 lumensThe module need only two pins of the microcontroller. (for example,Arduino). The ribbon can display 24-bit color palette.

An example of a project using LED panels.

Option Value
Power (Watt per meter)
7.2 V/m
Strip length
1 m
Installation: no
Degree of protection:

IP65

Power supply:
5 V DC
The color of the light: RGB
LED quantity (pieces per meter)
30
LED type: SMD 5050
Protection silicone case (photos)
Strip width:
10 mm
Connector: JST SM 4-wire/wire with removed insulation
Safety/compliance: RoHS
Guarantee: 24 months

Connection

The device has a 4-pin connector consisting of the following outputs:

  • GND (black wire)- module's ground
  • 5 V (red wire)- voltage supply, for one matrix you should connect the source with maximum load current of at least 3.6 A for each meter
  • C (blue wire)- digital control signal from the microcontroller (clock pin)
  • D (green wire)- digital control signal from the microcontroller (data pin)

 

 

The product is compatible with Arduino and Raspberry Pi

 

Install the Adafruit library for Arduino:

  1. Download the library from GtitHub by clicking the button Download ZIP
  2. Unzip the downloaded ZIP file, the result should be the folder that contains the files: Adafruit_NeoPixel.cpp That Adafruit_NeoPixel.h and other subfolders
  3. Rename the main folder to: Adafruit_NeoPixel
  4. Move the entire folder to the directory that contains the Arduino library, by default you should follow the path: /Documents/Arduino/Libraries
  5. Start Arduino IDE, the library will appear in the Menu: File -> Examples

 

First run - example strandtest

  • Run the test by choosing in the Arduino environment:
    • File -> Examples -> Adafruit_DotStar -> strandtest.Ino
  • Select the pin which will control the LEDs. By default, pin 4 and 5:
    • Line 16 #define DATAPIN 4
    • Line 17 #define CLOCKPIN 5
  • Select the number of pixels that will be controlled. The default value is 30:
    • Line 13 #define NUMPIXELS 30
  • Load a program into Arduino. Pixeles should turn in reference to the number that was specified in line 13.

 

Cable length 1.0 m
Voltage to 5.0 V
Voltage from 6.0 V
Voltage nominal 5 V
Nominal power 7.2 W
Tightness class IP67
LED - color RGB
LED - type APA102C
LED - digital yes
LED - LEDs 30 per meter
LED - stream 210 lm
LED lighting angle 160 °
LED lens clear
Package width 19 cm
Package height 1.7 cm
Package depth 21 cm
Package weight 0.082 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: