RGB LED Bar WS2811 - digital, addressable - IP65 30 LED/m, 7.2W/m, 12V - 5m

Index: LED-05449 EAN: 5904422303044

Individually addressable RGB LEDs located in a 5 m bar with a density of 30 diodes per meter. Each pixel consists of three RGB LEDs can emit a color from 24-bit palette. To control the module, one microcontroller's pin.

RGB LED Bar WS2811 - digital, addressable - IP65 30 LED/m, 7.2W/m, 12V - 5m
€22.50
€18.29 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: OEM

Description

Individually addressable RGB LEDs located in a 5 m bar with a density of 30 diodes per meter. Each pixel consists of three RGB LEDs can emit a color from 24-bit palette. To control the module, one microcontroller's pin. (for example,Arduino).

 

The bar has addressed groups of LEDs. One controller is on 3 led.

The LEDs are arranged densely, at a distance of about. 34 mm, because of this, the brightness is high. The system is supplied with the voltage of 12 V, consumes app. 0.6 A per each meter (7.2 W). The chain has the possibility of crossing every third diode.

 

 

The used communication protocol allows the serial connection of the LEDs. Another chain should be connected to the output connector, connecting appropriately 12V, GND and DOUT with DIN. The manufacturer notes that when working with more than 500 LEDs, may not be enough RAM in the system the Arduino Uno. You should also note that every following matrix will require increasing of the productivity power.

 

 

Connection

The device has a 3-pin connector consisting of the following leads:

  • GND (white wire)- module weight
  • 12V (red wire)- voltage supply, for one matrix you should connect the source with the output current not less than 1.0 A for each meter of chain
  • DIN (green wire)- digital control signal from the microcontroller

 

 

The product is compatible with Arduino and Raspberry Pi

 

Installation of the Adafruit library for Arduino:

  1. Download the library fromthe website GtitHubby clicking the buttonDownload ZIP
  2. Unzip the downloaded ZIP file, the result should be the folder that contains the files: Adafruit_NeoPixel.cpp That Adafruit_NeoPixel.h and other subfolders
  3. Rename the main folder to: Adafruit_NeoPixel
  4. Move the entire folder to the directory that contains the Arduino library, by default, it should be on the path: /Documents/Arduino/Libraries
  5. Start the Arduino again, the library will appear in the Menu: File -> Examples

 

First run - example simple

  • Run the test program by choosing in the Arduino environment:
    • File -> Examples -> Adafruit_Neopixel -> simple
  • Select the pin which will control the LEDs. By default, it is the pin 6:
    • Line 11#define PIN 6
  • Select the number of pixels that must be controlled. By default, it is 16:
    • Line 14#define NUMPIXELS 16
  • Upload a program into Arduino. Pixels should include in order to the amount specified in line 14.
  • If you want to change the glow color, enter different values into the function:
    • Line 40pixels.setPixelColor(and pixels.Color(0,150,0))
      In parenthesis are the components of RGB, the maximum value of each is 255
  • Change of the speed of the ignition of individual pixels is possible by editing the value:
    • Line 21int delayval = 500;

 

 

Bar WS2811 LED in combination with anArduino Uno.

Specification

  • Supply voltage: 12 V
  • Power: 7.2 W/m
  • Current consumption: 0.6 A at 1 meter of chain for a single diode with color white,
  • The LEDs used: LED-RGB-SMD5050 WS2811
  • Addressed pixel: 3 leds RGB
  • Each pixel consists of three RGB LEDs, can emit a color from 24-bit palette
  • Resistance to external conditions: IP65 (silicone cover)
  • Bar's width: 10 mm
  • Chain length: 5 m

 

Cable length 5.0 m
Voltage to 12.0 V
Voltage from 12.0 V
Voltage nominal 12 V
Nominal power 7.2 W
Tightness class IP65
LED - color RGB
LED - digital yes
LED - LEDs 30 per meter
LED lens clear
Package width 18 cm
Package height 1.6 cm
Package depth 21 cm
Package weight 0.207 kg

Be the first to ask a question about this product!

Product reviews

RGB LED Bar WS2811 - digital, addressable - IP65 30 LED/m, 7.2W/m, 12V - 5m

5/5

Average grade

5

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

prokop p. 31.10.2021 Confirmed purchase Translated review
ok!
Elżbieta L. 23.08.2021 Confirmed purchase Translated review
Product used for decoration
Bartek P. 14.06.2021 Confirmed purchase Translated review
Very good quality LED strip
Mariusz S. 09.06.2021 Confirmed purchase Translated review
works well in conjunction with Arduino
Elżbieta 11.10.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: