• EOL

Touch LED strip power switch - behind the mirror glass

Index: MOD-09631

The device is intended for touch on and off and adjusting the brightness of LED strips and LED tapes. The module is mounted behind the mirror glass.

Touch LED strip power switch - behind the mirror glass
€11.50
€9.35 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: OEM

Attention!

The product has been discontinued. Check other products incategory.

Description

The device is intended for touch on and off and adjusting the brightness ofLED tapes and LED strips. The module is mounted behind the mirror glass.

Connection

  • To the connector marked LED you should solder inputs for LED lighting.
  • To the socket marked with the power symbol you need to solder wires of power supply 12 / 24 V DC.
  • Check the correctness of connections.
  • Install the switch in the right spot, i.e. glass, or mirror. In the case of mounting behind a mirror, the place of attachment should be free of reflecting surface or sanded.
  • Mounting field must be at least as large as the illuminated symbol (30 mm).

Note

The device works best with 2nd classpower supplies. In case the device is powered from a lower class power supply with a PE lead (yellow - green), connect the minus (-) with the PE lead of the power supply and / or with the PE conductor of the network installation. Otherwise, the system may not respond to touch, or may react to a limited extent and with much weaker sensitivity.

In the case of lack of response to touch, or in the case of automatic lightening, disconnect the power supply for 30 sec. and re-plug it.

Specification

  • Supply voltage: 12 V DC
  • Output voltage: 12 V DC
  • Capacity: 60 W
  • Maximum current: 5 A
  • Degree of protection: IP40
  • Operating range: from 10 to 30 mm
Package width 9.2 cm
Package height 2.5 cm
Package depth 12.5 cm
Package weight 0.034 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: