



Akyga brand battery made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 2200 mAh. High energy density, slow self-discharge, small dimensions make it possible to use the battery in MP3 players, 3D glasses, smart clothes and toys. The integrated power cable is 50 mm long. The weight is 41 g and the dimensions 59 x 37 x 9 mm.
Akygalithium-polymer battery with a nominal voltage of 3.7 V, capacity 2200 mAh. Small dimensions, low weight, easy installation and high energy density as well as slow self-discharge make it possible to use the battery in GPS systems, toys, 3D glasses for phones and TV, MP3 players, as well as for powering measurement sensors, including medical sensors and in smart clothes. The battery is equipped with 50 mmlong cables.
Li-Pol Akyga 2200 mAh 1S 3.7 V Li-Pol Akyga 2200 mAh 3.7 V battery - 50 mm - 59 x 37 x 9 mm cables.
Rated voltage: 3,7 V
Capacity: 2200 mAh
Nominal charge/discharge current: 0.2 C (0.44 A)
Maximum charge/discharge current: 0.5 C (1.1 A) / 1 C (2.2 A)
Operating temperature range: -20°C to 60°C
Cable length: 50 mm
Connector type: cables
Raster of exits: 2.54 mm
Dimensions: 59 mm x 37 mm x 9 mm
Weight: 41 g
The lithium-polymer battery should only be charged using specially dedicated chargers. Used batteries should be returned to a waste disposal point or a shop when buying new ones. Under no circumstances should they be opened or disposed of with mixed waste. Damaged batteries with electrolyte leakage should not be used due to their harmful health effects.
NOTE! Before use it is necessary to read |
Length | 59 mm |
Width | 37 mm |
Height | 9 mm |
Mass | 41 g |
Voltage output from | 3.7 V |
Output voltage to | 4.2 V |
Nominal output voltage | 3.7 V |
Capacity mAh | 2200 mAh |
Cell - case | cell 1S |
Cell | 1 |
Cell - Type | Li-Pol |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
LiPo LCD voltage indicator 2-6 cells
Voltage indicator for Li-Po batteries (2-6 cells).Li-Pol charger with balancer REDOX Beta Combo + power supply
Loader/unloader with built-in cell balance. Supports LiPo, LiIon and LiFe, NiCd, NiMH and Pb cells and packages. It also comes with a power supply, allowing direct...Charger Li-Pol / Li-Fe / Li-Ion / Ni-CD / Ni-MH with balancer - Redox Alpha V2
Charger/discharger for packages: LiPo, LiFe, LiIon, NiCDi NiMH with built-in balancer of links Redox Alpha.MAX1811ESA+ - Li-ion battery charger
Charger module for individual cells of the battery Li-ion with the ability to power via USB.Bag for LiPo packages 200 x 180 mm (small)
Bag for safe storage of lithium-polymer packages with dimensions: 200 x 180 mm.Bag for LiPo packages 300 x 230 mm (large)
Bag for safe storage of lithium-polymer packages with dimensions: 300 x 230 mm.Li-Pol charger R-Planes - Pioneer
Battery charger for 7.4 - 11.1 V LiPo packages supplied with 9 - 16 V DC.Customers who bought this product also bought:
Male Headers 1x40 raster 2,54mm straight
Goldpin male 1x40 strap, pitch is 2.54 mm.Step-Up/Step-Down Voltage Regulator S7V8F3 - 3,3V 1A - Pololu 2122
Pulse inverter module. Input voltage 2.7 V to 11.8 V . Output voltage: 3,3 V. Maximum output current 1 A.Battery holder for 3 packs AAA (R3)
Basket for three AAA batteries (small fingers).Sunny Buddy - MPPT LiPo charger for solar cells - SparkFun PRT-12885
A 3.7V lipol single cell charger to which a photovoltaic cell can be connected. The supply voltage is between 6 V and 20 V, the maximum current is 450 mA. The device is...Solar cell 0,7W / 5,5V 95x95x3mm
A 0.7 W solar cell with an output voltage of 5.5 V. The dimensions of the plate are: 95 x 95 x 3 mm . The outputs are pads for solder cables.THT CF carbon resistor 1 / 4W 100Ω - 30pcs.
A set of 30 resistors with the 1/4 W power. Elements are in the through hole THT case.THT CF carbon resistor 1 / 4W 4.7kΩ - 30pcs
A set of 30 resistors with the 1/4 W power. Elements are in the through hole THT case.Waterproof probe with temperature sensor DS18B20 - 3m
Waterproof probe is equipped with a digital thermometer DS18B20 with cable length of 3 meters.Electrolytic capacitor 10uF/50V 5x11mm 105C THT - 10pcs
Through hole electrolytic capacitor of 10 uF / 50 V. Pins' pitch: 2 mm. Size: Ø5 x 11 mm. Price is for 10 pieces.Electrolytic capacitor 22uF/50V 5x11mm 105C THT - 10pcs.
Through hole electrolytic capacitor of 22 uF / 50 V. Pins' pitch: 2 mm. Size: Ø5 x 11 mm. Price is for 10 pieces.Products from the same category
Cellevia Li-Pol cell 1600mAh 1S 3,7V - connector 2,54mm
3.7 V lithium-polymer battery with a capacity of 1600 mAh and JST connector. Weight is 33 g and dimensions 50 x 34 x 9 mm. The cable terminated with a JST socket and free...Akyga Li-Pol cell 1400mAh 1S 3,7V - connector JST-BEC + socket - 54x34x7mm
Akyga lithium-polymer battery, 3.7V and 1400 mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. It is widely used in many mobile devices and can...Akyga Li-Pol cell 980mAh 1S 3,7V - 3 pins connector 2,54 - 50x34x6mm
Lithium-polymer 3.7V 980 mAh battery with 3-pin Ninigi female connector, 2.54 mm raster. The cable length is 100 mm. It is widely used in many mobile devices, can be used as a...Li-Pol Akyga 980mAh 1S 3,7V battery - 4 wires - 2.54mm female connector - 50x34x6mm
Lithium-polymer 3.7V 980 mAh battery with 4-pin female connector, 2.54 mm raster. Weight is 20 g and dimensions 50 x 34 x 6 mm.Akyga Li-Pol cell 650mAh 1S 3,7V - connector JST-BEC + socket - 40x30x6mm
Akyga lithium-polymer battery, 3.7 V and 650 mAh capacity. The battery's outputs are a connector and a 2.54 mm JST raster socket. The cable length is 150 mm. The weight is 15 g...Akyga Li-Pol cell 150mAh 1S 3,7V - connector JST-BEC + socket - 25x20x4mm
The battery by Akyga was made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 150 mAh. It is characterized by high energy density, small dimensions, low...Akyga Li-Pol cel l470mAh 1S 3,7V - cable 50 mm - 30x30x6mm
Akyga lithium-polymer battery, 3.7 V and 470 mAh capacity. The battery's leads are wires. The length of the cables is 50 mm. It is widely used in many mobile devices, can be...Akyga Li-Pol battery 320mAh 1S 3,7V - JST-BEC connector + socket - 40x30x3mm
3.7V lithium-polymer battery of 320 mAh capacity with JST connector. Weight is 9 g and dimensions 40 x 30 x 3 mm. The cable terminated with a JST socket and free cables is...Akyga Li-Pol cell 980mAh 1S 3,7V - connector JST-BEC + socket - 50x34x6mm
The Akyga battery is made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 980 mAh with a JST connector. It is characterized by high energy density, small...Li-Pol Redox cell 1800mAh 20C 1S 3.7V
A single Redox lithium-polymer cell. Discharge current: continuous 20C (36A), weight 41g, dimensions 83x29x8 mm.Redox Li-Pol cell 2200mAh 20C 1S 3.7V
A single Redox lithium-polymer cell. Discharge current: continuous 20C (44A), weight 53g, dimensions 97x33x8mm .Gens Ace Funfly Series Li-Pol 1300mAh 100C 14,8V
A 14.8 V lithium-polymer battery , designed to supply power to systems that require high discharge values. This enables an immediate increase in power during...