



Akyga battery made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 750 mAh. The integrated power cord is 100 mm long. The weight is 13 g and the dimensions 40 x 40 x 5 mm.
Akygalithium-polymer battery with a nominal voltage of 3.7 V, capacity 750 mAh. Small dimensions, low weight, easy installation and high energy density as well as slow self-discharge make it possible to use the battery in GPS systems, toys, 3D glasses for phones and TV, MP3 players, as well as for powering measurement sensors, including medical sensors and in smart clothes. The battery is equipped with 2 100mmlong wires.
Li-Pol Akyga 750 mAh 1S 3.7 V battery - 100 mm - 40 x 40 x 5 mm cables.
Rated voltage: 3,7 V
Capacity: 750 mAh
Nominal charge/discharge current: 0.2 C (0.15 A) / -
Maximum charge/discharge current: 0.5 C (0.375 A) / 1 C (0.75 A)
Operating temperature range: -20°C to 60°C
Power cable length: 100 mm
The exits: 2 wires with stripped insulation
Dimensions: 40 mm x 40 mm x 5 mm
Weight: 13 g
The lithium-polymer battery should only be charged using specially dedicated chargers. Used batteries should be returned to a waste disposal point or a shop when buying new ones. Under no circumstances should they be opened or disposed of with mixed waste. Damaged batteries with electrolyte leakage should not be used due to their harmful health effects.
NOTE! Before use it is necessary to read |
Length | 40 mm |
Width | 40 mm |
Height | 5 mm |
Mass | 13 g |
Voltage output from | 3.7 V |
Output voltage to | 4.2 V |
Nominal output voltage | 3.7 V |
Capacity mAh | 750 mAh |
Cell - case | cell 1S |
Cell | 1 |
Cell - Type | Li-Pol |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
LiPo LCD voltage indicator 2-6 cells
Voltage indicator for Li-Po batteries (2-6 cells).Li-Pol charger with balancer REDOX Beta Combo + power supply
Loader/unloader with built-in cell balance. Supports LiPo, LiIon and LiFe, NiCd, NiMH and Pb cells and packages. It also comes with a power supply, allowing direct...Charger Li-Pol / Li-Fe / Li-Ion / Ni-CD / Ni-MH with balancer - Redox Alpha V2
Charger/discharger for packages: LiPo, LiFe, LiIon, NiCDi NiMH with built-in balancer of links Redox Alpha.MAX1811ESA+ - Li-ion battery charger
Charger module for individual cells of the battery Li-ion with the ability to power via USB.Bag for LiPo packages 200 x 180 mm (small)
Bag for safe storage of lithium-polymer packages with dimensions: 200 x 180 mm.Bag for LiPo packages 300 x 230 mm (large)
Bag for safe storage of lithium-polymer packages with dimensions: 300 x 230 mm.Li-Pol charger R-Planes - Pioneer
Battery charger for 7.4 - 11.1 V LiPo packages supplied with 9 - 16 V DC.Customers who bought this product also bought:
Anti magnetic tweezer curved BK15
Stainless steel antimagnetic tweezers. Symbol: Baku BK15ESD.ArduCam ESP8266-12E WiFi IoT - compatible with Arduino
The module is compatible with Arduino, based on ESP8266. It has the ability to connect to wi-fi and 11 digital inputs/outputs, 10 PWM channels, 1 analog input, as well as...Feather Bang ESP8266 wi - fi module, GPIO, ADC - Adafruit 2821
Wi-fi module, based on ESP8266. On board are 9 GPIO ports with support for I2C and SPI, analog input and a connector of a lipo battery of 3.7 V. It has NodeMCU software that...Akyga Li-Pol cell 750mAh 1S 3,7V - connector JST-BEC + socket - 50x34x4mm
Akyga lithium-polymer battery, 3.7V and 750mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. Weight is 16 g and dimensions 50 x 34 x 4 mm. The...AVR microcontroller - ATmega328P-AU SMD
Microcontroller AVR from Atmel in a case soldered on the surface (SMD was also used in the popular Arduino module).Slide switch MSS-2336 3-position - straight - 5 pcs
Slide switch, straight, to print with the size of 13 x 3.6 x 3.6 mm. Pins pitch: 2.00 mm. 5 pcs.Tact Switch 6x6mm/4,3mm DIP - 5 pcs.
A small monostable button mounted in a through-hole way - THT with the size: 6x6 mm, height: 4.3 mm. The price is for 5 pieces.JST socket angled - SparkFun PRT-08612
2-pin connector, type JST - angular, for soldering into the PCB. It is used in small li-pol battery.JST 2-pin plug straight, 2,0mm raster with cable
2-pin connector, type JST-PH with the cable with the length of 10 cm. The pitch is 2.0 mm.Radio module nRF24L01+ 2,4GHz - THT transceiver - black
Radio module (transmitter and receiver) operating in 2.4 GHz band with SPI communication interface. Powered by 1.9 V - 3.6 V, the outputs are goldpin connectors. It has a...Products from the same category
Cellevia Li-Pol cell 1600mAh 1S 3,7V - connector 2,54mm
3.7 V lithium-polymer battery with a capacity of 1600 mAh and JST connector. Weight is 33 g and dimensions 50 x 34 x 9 mm. The cable terminated with a JST socket and free...Akyga Li-Pol cell 1400mAh 1S 3,7V - connector JST-BEC + socket - 54x34x7mm
Akyga lithium-polymer battery, 3.7V and 1400 mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. It is widely used in many mobile devices and can...Li-Pol Akyga 980mAh 1S 3,7V battery - 4 wires - 2.54mm female connector - 50x34x6mm
Lithium-polymer 3.7V 980 mAh battery with 4-pin female connector, 2.54 mm raster. Weight is 20 g and dimensions 50 x 34 x 6 mm.Akyga Li-Pol cell 980mAh 1S 3,7V - 3 pins connector 2,54 - 50x34x6mm
Lithium-polymer 3.7V 980 mAh battery with 3-pin Ninigi female connector, 2.54 mm raster. The cable length is 100 mm. It is widely used in many mobile devices, can be used as a...Akyga Li-Pol cell 650mAh 1S 3,7V - connector JST-BEC + socket - 40x30x6mm
Akyga lithium-polymer battery, 3.7 V and 650 mAh capacity. The battery's outputs are a connector and a 2.54 mm JST raster socket. The cable length is 150 mm. The weight is 15 g...Redox Li-Pol cell 2200mAh 20C 1S 3.7V
A single Redox lithium-polymer cell. Discharge current: continuous 20C (44A), weight 53g, dimensions 97x33x8mm .Akyga Li-Pol cell 150mAh 1S 3,7V - connector JST-BEC + socket - 25x20x4mm
The battery by Akyga was made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 150 mAh. It is characterized by high energy density, small dimensions, low...Akyga Li-Pol cel l470mAh 1S 3,7V - cable 50 mm - 30x30x6mm
Akyga lithium-polymer battery, 3.7 V and 470 mAh capacity. The battery's leads are wires. The length of the cables is 50 mm. It is widely used in many mobile devices, can be...Akyga Li-Pol cell 980mAh 1S 3,7V - connector JST-BEC + socket - 50x34x6mm
The Akyga battery is made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 980 mAh with a JST connector. It is characterized by high energy density, small...Akyga Li-Pol battery 320mAh 1S 3,7V - JST-BEC connector + socket - 40x30x3mm
3.7V lithium-polymer battery of 320 mAh capacity with JST connector. Weight is 9 g and dimensions 40 x 30 x 3 mm. The cable terminated with a JST socket and free cables is...Li-Pol Redox cell 1800mAh 20C 1S 3.7V
A single Redox lithium-polymer cell. Discharge current: continuous 20C (36A), weight 41g, dimensions 83x29x8 mm.Akyga Li-Pol cell 1850mAh 1S 3,7V - JST-BEC connector + socket - 40x30x10mm
Akyga battery made of Li-Pol cells with a nominal voltage of 3.7 V and a capacity of 1850 mAh. High energy density, slow self-discharge, small dimensions and low weight...