Li-Pol Akyga 980mAh 1S 3.7V Li-Pol Akyga 980mAh 1S 3.7V rechargeable battery - female connector 3-pin raster 2.54mm + adhesive
Li-Pol Akyga 980mAh 1S 3.7V Li-Pol Akyga 980mAh 1S 3.7V rechargeable battery - female connector 3-pin raster 2.54mm + adhesive
Li-Pol Akyga 980mAh 1S 3.7V Li-Pol Akyga 980mAh 1S 3.7V rechargeable battery - female connector 3-pin raster 2.54mm + adhesive - zdjęcie 1
Li-Pol Akyga 980mAh 1S 3.7V Li-Pol Akyga 980mAh 1S 3.7V rechargeable battery - female connector 3-pin raster 2.54mm + adhesive - zdjęcie 2

Akyga Li-Pol cell 980mAh 1S 3,7V - 3 pins connector 2,54 - 50x34x6mm

Index: AKU-06051

Lithium-polymer 3.7V 980 mAh battery with 3-pin Ninigi female connector, 2.54 mm raster. The cable length is 100 mm. It is widely used in many mobile devices, can be used as a power source in model making, GPS systems and even medicine. The weight is 20 g and dimensions 50 x 34 x 6 mm.

€4.88
€3.97 tax excl.

Available, 24h shipping!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: Akyga

Product description: Li-Pol Akyga 980 mAh 1S 3.7 V battery - 3-pin 2.54 mm female connector raster - 50 x 34 x 6 mm.

Akygalithium-polymer battery, 3.7V and 980mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. The cable length is 100mm. It can be used in many devices, e.g.: digital cameras, cameras, mobile phones, multimedia players. It can also be used as a power source in model making,GPS systemsand even medicine. Akyga battery is easy to install, its self-discharge rate is slow.

Akumulator Li-Pol Akyga 120mAh 1S 3,7V - złącze JST-BEC + gniazdo

Li-Pol Akyga 980 mAh 1S 3.7 V - 3 wires - 2.54 mm - 50 x 34 x 6 mm connector.

Main features of Li-Pol Akyga battery

  • Very efficient
  • It has optimal capacity in relation to the dimensions and weight of the cell
  • Easy to install
  • Environmentally friendly battery
  • It has a slow rate of cell discharge on its own
  • It is widely used e.g. in mobile devices, GPS systems, medicine

Li-Pol battery specification

  • Battery type: lithium-polymer
  • Rated voltage: 3,7 V

  • Capacity: 980 mAh

  • Operating temperature range: -20°C to 60°C

  • Power cable length: 100 mm

  • Number of pins: 3

  • Nominal charge/discharge current: 0.2 C (0.196 A) / -

  • Maximum charge/discharge current: 0.5 C (0.49 A) / 1 C (0.98 A)

  • Raster of exits: 2.54 mm

  • Security: PCM + NTC
  • Exits:Ninigiconnector
  • Dimensions: 50 x 34 x 6 mm

  • Weight: 19.6 g

NOTE!

Before use it is necessary to read

LI-POL! BATTERY USAGE AND WARRANTY RULES!

Length 50 mm
Width 34 mm
Height 6 mm
Mass 20 g
Voltage output from 3.7 V
Output voltage to 4.2 V
Nominal output voltage 3.7 V
Capacity mAh 980 mAh
Cell - case cell 1S
Cell 1
Cell - Type Li-Pol

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

LiPo LCD voltage indicator 2-6 cells

Voltage indicator for Li-Po batteries (2-6 cells).
Index: MOD-00483
Index: MOD-00483
Unavailable
Regular price €5.28 Price €5.28

Li-Pol charger with balancer REDOX Beta Combo + power supply

Loader/unloader with built-in cell balance. Supports LiPo, LiIon and LiFe, NiCd, NiMH and Pb cells and packages. It also comes with a power supply, allowing direct...
Index: AKC-00557
Index: AKC-00557
Unavailable
Regular price €30.00 Price €30.00

Charger Li-Pol / Li-Fe / Li-Ion / Ni-CD / Ni-MH with balancer - Redox Alpha V2

Charger/discharger for packages: LiPo, LiFe, LiIon, NiCDi  NiMH with built-in balancer of links Redox Alpha.
Index: AKC-00646
Index: AKC-00646
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.23 Price €20.23

MAX1811ESA + Li-ion battery charger

Charger module for individual cells of the  battery Li-ion with the ability to power via USB.
Index: UCC-00662
Index: UCC-00662
Unavailable
Regular price €5.80 Price €5.80

Bag for LiPo packages 200 x 180 mm (small)

Bag for safe storage of lithium-polymer packages with dimensions: 200 x 180 mm.
Index: AKC-00825
Index: AKC-00825
Unavailable
Regular price €8.14 Price €8.14

Bag for LiPo packages 300 x 230 mm (large)

Bag for safe storage of lithium-polymer packages with dimensions: 300 x 230 mm.
Index: AKC-00831
Index: AKC-00831
Unavailable
Regular price €10.47 Price €10.47

Charger Li-Pol R-Planes

Battery charger for LiPo packages 7.4 - 11.1V powered by 12V DC.
Index: AKC-00832
Index: AKC-00832
Unavailable
Regular price €15.12 Price €15.12

Charger Li-Pol R-Planes - Pioneer

Battery charger for 7.4 - 11.1 V LiPo packages supplied with 9 - 16 V DC.
Index: AKC-00833
Index: AKC-00833
Waiting time: about 10-30 days
Regular price €13.72 Price €13.72

Customers who bought this product also bought:

Rosin 40g

Flux with the addition of activators to facilitate soldering.
Index: NSZ-00169
Index: NSZ-00169
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.65 Price €0.65

Soldering tin Cynel 100g / 0.7mm

Soldering tin with flux with a diameter of 0.56 mm in spool with weight of 100 g.
Index: NSZ-00834
Index: NSZ-00834
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.16 Price €4.16

SparkFun Proto Shield Kit

A set of basic electronic elements along with a universal board which is suited to the connectors of Arduino. A kit for self-assembly.
Index: SPF-01768
Index: SPF-01768
Unavailable
Regular price €9.28 Price €9.28

Temperature and humidity sensor DHT21 (AM2301) in case

Temperature and humidity sensor with a digital, single-wired interface. Measuring range: temperature -40 to 80 °C, humidity 0 to 100 % RH . Powered with voltage in the range...
Index: MOD-01884
Index: MOD-01884
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.81 Price €5.81

Female-female 4 pin - 20cm

4-pin multicolor cable with the length of about 20 cm. Ended on both sides with a female connector - pitch of 2.54 mm.
Index: KAB-02713
Index: KAB-02713
Czas oczekiwania: ok. 10-30 dni
Regular price €0.35 Price €0.35

Solar cell 0.4W/5.5V 65x65x3mm

A 0.4 W solar cell with an output voltage of 5.5 V. The dimensions of the plate are: 65 x 65 x 3 mm . The outputs are pads for solder cables.
Index: AKU-03689
Index: AKU-03689
Waiting time: about 10-30 days
Regular price €2.53 Price €2.53

Solar Charger Shield v2.2 - shield for Arduino

Module for connecting a mobile power source for Arduino. It allows you to power the microcontroller from any battery voltage from 3 V to 4.2 V or solar panel voltage from 4.8 V...
Index: SEE-04429
Index: SEE-04429
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.23 Price €13.23

BMP280 - digital barometer, pressure sensor 110kPa I2C / SPI 3-5V - STEMMA QT - Adafruit 2651

Module with digital barometer from Bosch BMP280. The measurement range is from 300 hPa to 1100 hPa with 1 hPa accuracy. The system is powered with the voltage ranging from 3 V...
Index: ADA-04631
Index: ADA-04631
In stock, shipping 24 hours!
(Check quantity)
Regular price €12.77 Price €12.77

Bluno M3 STM32 ARM Cortex + BLE Bluetooth 4.0 - compatible with Arduino

Module from DFRobot is based on the STM32 with 32-bit ARM Cortex-M3 core (72 MHz, 512 KB of Flash, 64 KB of RAM). It has 39 digital inputs/outputs, 11 analog inputs and the...
Index: DFR-05194
Index: DFR-05194
In stock, shipping 24 hours!
(Check quantity)
Regular price €27.67 Price €27.67

Set of heat shrink tubes 100pcs - multicolor

Set of multicolored heat shrink tubes with length 100 mm and diameter from 1.5 mm to 13 mm. The whole set come in transparent packaging.
Index: NSZ-05375
Index: NSZ-05375
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.31 Price €2.31

Yato YT-2036 - 160mm side cutting pliers

Side cutting pliers 160 mm long made of carbon steel with nickel-plated finishes. They have a comfortable TPR handle that prevents the hand from slipping.
Index: NSZ-05850
Index: NSZ-05850
Waiting time: about 10-30 days
Regular price €4.86 Price €4.86

Alcohol sensor MQ-3 - semiconductor

Alcohol sensor with analog output. It measures the content of alcohol, for example, in the exhaled air.
Index: DNG-00061
Index: DNG-00061
Czas oczekiwania: ok. 10-30 dni
Regular price €1.98 Price €1.98

RandomCategoryProducts

Akyga Li-Pol cell 560mAh 1S 3,7V - cables 100 mm - 40x30x5mm

Akyga brand battery made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 650 mAh. High energy density, slow self-discharge, small dimensions and low...
Index: AKU-06052
Index: AKU-06052
Available, 24h shipping!
(Check quantity)
Regular price €4.63 Price €4.63

Akyga Li-Pol 1350mAh 1S 3,7V battery - JST-BEC connector + socket - 59x37x5mm

3.7 V lithium-polymer battery of 1350 mAh capacity with JST connector. The weight is 26 g and the dimensions 59 x 37 x 5 mm. The cable terminated with JST socket and free...
Index: AKU-12211
Index: AKU-12211
Waiting time about 14 days
Regular price €6.44 Price €6.44

Li-Pol Akyga 980mAh 1S 3,7V battery - 4 wires - 2.54mm female connector - 50x34x6mm

Lithium-polymer 3.7V 980 mAh battery with 4-pin female connector, 2.54 mm raster. Weight is 20 g and dimensions 50 x 34 x 6 mm.
Index: AKU-12661
Index: AKU-12661
Available, 24h shipping!
(Check quantity)
Regular price €4.40 Price €4.40

Akyga Li-Pol battery 1500mAh 1S 3,7V - JST-BEC connector + socket - 70x40x6mm

3.7 V lithium-polymer battery of 1500 mAh capacity with JST connector. Weight is 30 g and dimensions 70 x 40 x 6 mm. The cable terminated with a JST socket and free cables...
Index: AKU-13621
Index: AKU-13621
Available, 24h shipping!
(Check quantity)
Regular price €7.09 Price €7.09

Akyga Li-Pol cell 1400mAh 1S 3,7V - connector JST-BEC + socket - 54x34x7mm

Akyga lithium-polymer battery, 3.7V and 1400 mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. It is widely used in many mobile devices and can...
Index: AKU-14160
Index: AKU-14160
Available, 24h shipping!
(Check quantity)
Regular price €6.97 Price €6.97

Akyga Li-Pol cell 750mAh 1S 3,7V - JST-BEC connector + socket - 50x34x4,4mm

Akyga lithium-polymer battery, 3.7V and 750mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. The cable length is 150 mm. It is widely used in...
Index: AKU-15607
Index: AKU-15607
Available, 24h shipping!
(Check quantity)
Regular price €4.63 Price €4.63

Cellevia Li-Pol cell 250mAh 1S 3.7V - connector 2,54mm

3.7V lithium-polymer battery of 250 mAh capacity with JST connector. Weight is 9 g and dimensions 30 x 17 x 6 mm.
Index: AKU-03072
Index: AKU-03072
Available, 24h shipping!
(Check quantity)
Regular price €3.70 Price €3.70

Akyga Li-Pol cell 1250mAh 1S 3,7V - connector JST-BEC + socket - 58x34x6mm

Akyga lithium-polymer battery, 3.7 V and 1250 mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. The cable length is 150 mm. Weight is 25.5 g and...
Index: AKU-06038
Index: AKU-06038
Available, 24h shipping!
(Check quantity)
Regular price €6.02 Price €6.02

Akyga Li-Pol cell 650mAh 1S 3,7V - connector JST-BEC + socket - 40x30x6mm

Akyga lithium-polymer battery, 3.7 V and 650 mAh capacity. The battery's outputs are a connector and a 2.54 mm JST raster socket. The cable length is 150 mm. The weight is 15 g...
Index: AKU-06039
Index: AKU-06039
Available, 24h shipping!
(Check quantity)
Regular price €4.77 Price €4.77

Akyga Li-Pol cell 1400mAh 1S 3.7V - connector JST-BEC + socket - 62x34x6mm

Akyga lithium-polymer battery, 3.7V and 1400 mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. It is widely used in many mobile devices and can...
Index: AKU-06031
Index: AKU-06031
Available, 24h shipping!
(Check quantity)
Regular price €7.60 Price €7.60

Akyga Li-Pol cell 800mAh 1S 3,7V - JST-BEC connector + socket - 50x33x4,5mm

Akyga battery made of Li-Pol cells with a nominal voltage of 3.7 V and a capacity of 800 mAh . High energy density, slow self-discharge, small dimensions and low weight...
Index: AKU-15609
Index: AKU-15609
Available, 24h shipping!
(Check quantity)
Regular price €3.70 Price €3.70

Akyga Li-Pol cell 1000mAh 1S 3,7V - JST-BEC connector + socket - 40x30x8mm

Akyga Li-Pol type battery with a nominal voltage of 3.7 V and a capacity of 1000 mAh . It is characterized by high energy density and slow self-discharge. It has a...
Index: AKU-15612
Index: AKU-15612
Available, 24h shipping!
(Check quantity)
Regular price €6.74 Price €6.74