Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI - zdjęcie 1
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI - zdjęcie 2
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI - zdjęcie 3
Konwerter poziomów logicznych 3,3V / 5V I2C UART SPI - zdjęcie 4

MyoWare Power Shield - power supply module for EMG sensor - SparkFun DEV-13684

Index: SPF-05980

Board designed for MyoWare Muscle Sensor. It provides power to the main unit using two CR2032 batteries. The batteries are connected in parallel to increase the capacity at a nominal voltage of 3 V.

€5.23
€4.25 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns

Description

Board designed for MyoWare Muscle Sensor. It provides power to the main unit using two CR2032 batteries. The batteries are connected in parallel to increase the capacity at a nominal voltage of 3 V. The board provides a stable power supply system in case of lack of energy from the slot.

 

 

 
Due to the size of the battery, the board can make it hard to access the other shields. It is recommended to connect the Power Shield  module over the shields, to which the access is needed.
 

 

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

MiniUSB B - A cable Esperanza EB-132 - 1,8m

USB cable (type A) - miniUSB cable (type B) used to connect your computer to devices equipped with mini USB-B sockets. It is 180 cm long.
Index: KAB-01090
Index: KAB-01090
Unavailable
Regular price €1.14 Price €1.14

Pro Micro - 3.3V/8MHz - Atmega32u4 module - SparkFun DEV-12587

Module based on the Arduino Leonardo, is characterized by small size. It has the AVR Atmega32U4 microcontroller. It is equipped with 20 digital inputs/outputs, as well as...
Index: SPF-01592
Index: SPF-01592
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.88 Price €17.88

Arduino Pro Mini 328 module - 3.3 V/8 MHz - SparkFun DEV-11114

The module based on the Arduino Uno, is characterized by small size and low profile. It has an Atmega328 microcontroller with 32 KB Flash memory, 2 KB RAM, 14 digital I/o, 6 of...
Index: SPF-01596
Index: SPF-01596
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.40 Price €11.40

Arduino Pro 328 module - 3,3V/8 MHz - SparkFun DEV-10914

Module based on Arduino Uno with ATmega328 system, is characterized by small size and low profile. It has 32 KB of Flash memory, 2 KB of RAM 14 digital of I/os, 6 of which can...
Index: SPF-01679
Index: SPF-01679
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.65 Price €17.65

Customers who bought this product also bought:

Set of 140 wires for breadboards

A kit of 140 wires of different length, to connect the fields on the breadboards (test).
Index: KAB-00678
Index: KAB-00678
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.53 Price €2.53

Connecting cables female-female 20cm - 40pcs.

Set includes 40 PCs of multi-colored connection cables with a length of 20 cm ended from both sides with the female connector on goldpin.
Index: KAB-01021
Index: KAB-01021
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.38 Price €1.38

Power supply multi-range Voice Kraft 3V-12V / 1,2A

Universal power supply with adjustable output voltage in the range of 3V-12V , with continuous output current up to 1.2A (momentary up to 2A). It has a set of the most...
Index: ZAS-01365
Index: ZAS-01365
Unavailable
Regular price €8.35 Price €8.35

Set of goldpin raster 2,54mm - maxi

The set includes the popular goldpin connectors, 2.54 mm pitch: straight male 1x40 and 2x40 strap, male angled 1x40 and 2x40 strap, female 1x40 and 2x40 strap. In addition, the...
Index: KAB-01451
Index: KAB-01451
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.30 Price €2.30

Biomedical electrodes - 10pcs - SparkFun SEN-12969

10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.81 Price €8.81

Cables for biomedical electrodes - SparkFun CAB-12970

Wires ended on the one side with three connectors for biomedical electrodes, on the other, with jack connector of a 3.5 mm.
Index: SPF-02605
Index: SPF-02605
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.63 Price €6.63

MyoWare Muscle Sensor - a sensor for measuring EMG muscle activity - SparkFun SEN-13723

The sensor allows to control devices via bioelectrical signals generated by human muscles (EMG). The output is an analog signal that can be read using any microcontroller with...
Index: SPF-05978
Index: SPF-05978
In stock, shipping 24 hours!
(Check quantity)
Regular price €52.33 Price €52.33

MyoWare Cable Shield - EMG sensor jack

MyoWare Muscle Sensor plate. It allows the main module to be used at a distance, without having to be attached to the person being examined. It has a 3.5 mm jack connector for...
Index: SPF-05979
Index: SPF-05979
Unavailable
Regular price €3.93 Price €3.93

MyoWare Proto Shield - prototype module for EMG sensor - SparkFun BOB-13709

Board is designed for MyoWare Muscle Sensor. It allows you to create any circuit and connect it to the main module. It has 8 x 15 mounting holes with the pitch of 2.54 mm.
Index: SPF-05981
Index: SPF-05981
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.44 Price €2.44

Drone quadrocopter Shadow Breaker Top Selling X6 with camera HD - black and white - 13cm

Quadrocopter with 6-axis gyro stabilization system. You can use it indoors and outdoors within approx. 100 meters range. The model is controlled by the control unit with a...
Index: ROB-04751
Index: ROB-04751
Unavailable
Regular price €46.28 Price €46.28

Logic level converter 3,3V / 5V - I2C UART SPI

The module allows to exchange data between systems that use two popular voltages: 3.3 V and 5 V. It provides connection of interfaces: UART, SPI and I2C.
Index: MOD-01513
Index: MOD-01513
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.74 Price €1.74

OpenLog - data logger - SparkFun DEV-13712

The device allows for easy data recording onto the memory microSD card up to 64 GB. Communication is via the serial interface (RX, TX).
Index: SPF-01708
Index: SPF-01708
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.88 Price €17.88

Products from the same category

Particle Sensor Breakout - MAX30101 - SparkFun SEN-16474

The sensor is based on a system MAX30101 and allows for the determination of the distance, pulse, smoke, and even blinking of an eye. It has 3 LEDs and a very responsive...
Index: SPF-08065
Index: SPF-08065
In stock, shipping 24 hours!
(Check quantity)
Regular price €24.42 Price €24.42

MyoWare Muscle Sensor Development Kit - SparkFun KIT-14409

The kit allows you to control devices via bioelectrical signals generated by human muscles (EMG). The output is an analog signal that can be read using any microcontroller with...
Index: SPF-07278
Index: SPF-07278
In stock, shipping 24 hours!
(Check quantity)
Regular price €102.09 Price €102.09

MyoWare Proto Shield - prototype module for EMG sensor - SparkFun BOB-13709

Board is designed for MyoWare Muscle Sensor. It allows you to create any circuit and connect it to the main module. It has 8 x 15 mounting holes with the pitch of 2.54 mm.
Index: SPF-05981
Index: SPF-05981
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.44 Price €2.44

MyoWare Muscle Sensor - a sensor for measuring EMG muscle activity - SparkFun SEN-13723

The sensor allows to control devices via bioelectrical signals generated by human muscles (EMG). The output is an analog signal that can be read using any microcontroller with...
Index: SPF-05978
Index: SPF-05978
In stock, shipping 24 hours!
(Check quantity)
Regular price €52.33 Price €52.33

Heart rate monitor - SparkFun SEN-11574

Module for measuring the human heart rate, compatible with Arduino. It is working with the voltage from 3 V to 5 V, the output is the analog signal. The kit includes a probe...
Index: SPF-03063
Index: SPF-03063
In stock, shipping 24 hours!
(Check quantity)
Regular price €30.12 Price €30.12

Sensor for measuring heart activity - AD8232 - SparkFun SEN-12650

Module for measuring electrical activity of the human heart. The output is an analog signal which can be saved as EKG. The sensor is easy to operate, the manufacturer provides...
Index: SPF-02654
Index: SPF-02654
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.74 Price €19.74

Cables for biomedical electrodes - SparkFun CAB-12970

Wires ended on the one side with three connectors for biomedical electrodes, on the other, with jack connector of a 3.5 mm.
Index: SPF-02605
Index: SPF-02605
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.63 Price €6.63

Biomedical electrodes - 10pcs - SparkFun SEN-12969

10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.81 Price €8.81

Grove - GSR sensor - electrical resistance of the skin

Module from the Grove series equipped with GSR sensor using the galvanic-skin reaction. It is powered with the voltage of 3.3 V or 5V. The s ensors of this type are used in...
Index: SEE-11314
Index: SEE-11314
Waiting time approx. 10-30 days
Regular price €8.12 Price €8.12

Grove - heart rate monitor - heart rate sensor

Module from the Grove series, used for measuring the pulse with a clip on the finger, based on high-quality optical system CMOS with the green LED and integrated digital...
Index: SEE-11310
Index: SEE-11310
Waiting time approx. 10-30 days
Regular price €21.63 Price €21.63

Grove - Sensor for measuring EMG muscle activity

Module from the Grove series that allows you to collect the bioelectric signal generated by the human muscles (EMG). The output is an analog signal that can be read using any...
Index: SEE-11308
Index: SEE-11308
Waiting time approx. 10-30 days
Regular price €30.21 Price €30.21

Grove - heart rate sensor with a clip on the ear

Set for monitoring the heart rate, contains an ear clip with a wire and receiver module. The results can be displayed on the monitor through a serial port. The supply voltage...
Index: SEE-04409
Index: SEE-04409
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.00 Price €13.00