• EOL

Odroid C1 + - Amlogic S805 Quad-Core 1.5GHz + 1GB RAM

Index: ODR-06307

Odroid minicomputer version C1+ with a powerful Amlogic S805 quad-core 32-bit ARM-7 Cortex-A5 1.5 GHz processor. The board has 1 GB of DDR3 RAM memory, built-in Ethernet Gigabit port, HDMI port and four USB ports, 40 GPIO, microSD card connectors and IR receiver. Works with Ubuntu 14.04 or Android 4.2 systems.

Odroid C1 + - Amlogic S805 Quad-Core 1.5GHz + 1GB RAM
€53.50
€43.50 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Odroid

Attention!

The product has been discontinued. Check other products incategory.

Description: Odroid C1+ - Amlogic S805 Quad-Core 1.5GHz + 1GB RAM

Odroid minicomputer in C1+ version with Amlogicquad-core 32-bitARM-7Cortex-A5 1.5 GHzprocessor. The board has1 GB of DDR3 RAM memory, built-in Ethernet port, HDMI port and four USB ports, 40 GPIO, microSD card and IR receiver connectors. Works withUbuntu 14.04orAndroid 4.2systems.

Odroid C+ Quad-Core 1,5GHz 1GB RAM

The device has 4 USB ports, HDMI and Ethernet port and many others.

What do I need to run my Odroid minicomputer?

Additional accessoriesare also available in our shop-such asWiFicard,touch screen orUSB 3.0 - SATAmodule.

Operating system

Odroid C1+ works with Ubuntu 14.04 and Android 4.2 systems based on 3.10 LTS kernel. The drive can be a microSD card or eMMC 4.5 HS200 Flash memory module.

Ubuntu and Android systems can be downloaded fromthe manufacturer's website.

Installation of the system is very easy -check our manual!

Odroid C1+ Quad-Core 1,5GHz 1GB RAM

The set includes a heatsink.

Communication Odroid C1+

Odroid has basic communication interfaces, which can be found in PC-class office computers. In addition to the previously mentioned audio and video interfaces, the user has at his disposal:

  • four USB connectors,under which you can connect e.g. a mouse, a keyboard, a WiFi card or a flash drive. If it turns out that there are too few connections, you can increase their number usingan external USB HUB.
  • Ethernet socket, i.e. the possibility of direct connection to the LAN.
  • GPIO x 40 pin- general purpose outputs/inputs that can be used to operate LEDs, buttons, motor controllers. Among them there are pins supporting interfaces: I2C, SPI and UART.
  • microSD slot- slot for a microSD memory card, on which the operating system can be installed.Odroid has a slot for amicroSD memory cardon the back of the board. The card is not included in the set and can be purchased separately.

Power supply

As a power source, the system uses a DC Jack connector. The manufacturer recommends that the voltage given on the connector should be 5.0 V, while the current capacity of the power supply used should be at least 2.0 A. In our offer you will finda dedicated power supply.

Odroid C1+ z radiatorem

OdroidC1+ hasanHDMIport,Ethernetportand a40-pinGPIO connector.

Enclosures for Odroid C1+

In our offer you will finddedicated enclosuresthat protect your Odroid minicomputer against external conditions. Dedicatedpower suppliesare also available.

Odroid black case

In the picture you can see Odroid minicomputer in a dedicatedcase.

Specification and comparison of Odroid C0, Odroid C1+, Odroid C2, Odroid XU4

Basic information
Model Odroid C0 Odroid C1+ Odroid C2 Odroid XU4
Specification
Processor Amlogic S805 Amlogic S805 Amlogic S905 Samsung Exynos5422
Core

Quad-Core 32-bit

ARM Cortex A5

Quad-Core 32-bit

ARM Cortex A5

Quad-Core 64-bit

ARM Cortex A53

Octa-Core

ARM Cortex-A15

ARM Cortex™-A7

Graphics

ARM Mali 450MP

OpenGL ES

2.0/1.1

ARM Mali 450MP

OpenGL ES

2.0/1.1

ARM Mali 450MP

OpenGL ES

2.0/1.1

3D Mali-T628 MP6

OpenGL ES

3.0/2.0/1.1

Systems

Ubuntu 14.04

Android 4.4

Kernel 3.10 LTS

Ubuntu 14.04

Android 4.4

Kernel 3.10 LTS

Ubuntu 16.04

Android 5.1

Kernel 3.14 LTS

Ubuntu 15.04

Android 4.4.2

Kernel LTS 3.10

Clocking 1.5 GHz 1.5 GHz 1.5 GHz 2 GHz / 1.4 GHz
Architecture ARMv7 ARMv7 ARMv8 ARMv7
Memory RAM

1 GB DDR3

SDRAM

1 GB DDR3

SDRAM 792MHz

2 GB DDR3

SDRAM 792Mhz

2 GB LPDDR3

frame 750Mhz
Memory

microSD card

UHS1

eMMC4.5 HS200

microSD card

UHS1 to 16 GB

eMMC4.5

microSD card

UHS1 to 128 GB

eMMC5.0

microSD card

UHS1 to 64 GB

eMMC5.0
GPIO socket

40-pin connector

+ 7 pin I2S

(to be soldered)

40-pin connector

+ 7 pin I2S

40-pin connector

+ 7 pin I2S

30-pin connector

+ 12 pin I2S

2mm raster

Power supply

5 V / 2 A

DC Jack

5 V / 2 A

DC Jack

5 V / 2 A

DC Jack

5 V / 4 A

DC 2.5x2.1mm

Dimensions of the tiles 58x56x11mm 85x56x18mm 85x56x18mm 82x58x22mm
Interfaces
USB Host

2 x USB 2.0

(option

to be soldered in)

4x USB 2.0

socket type A

4x USB 2.0

socket type A

2x USB 3.0

1x USB 2.0

socket type A

USB OTG -

1x microUSB

1x microUSB -
Network interface -

Ethernet

10/100/1000

Mbit/s

Ethernet

10/100/1000

Mbit/s

Ethernet

10/100/1000

Mbit/s

RTC system Built-in Built-in - -
Video HDMI HDMI HDMI 2.0 4K/60Hz HDMI 1.4a
Audio

HDMI / I2S

HDMi

HDMI / I2S

HDMI
ADC transmitter

2 channels

10-bit

2 channels

10-bit

2 channels

10-bit

2 channels

10-bit

Communication

UART, SLEEPING, I2C,

GPIO, ADC

UART, SLEEPING, I2C,

GPIO, ADC

UART, SLEEPING, I2C,

GPIO, ADC

UART, SLEEPING, I2C,

GPIO, ADC

Video

Presentation of the Odroid C1+ minicomputer.

UC - Microcontroller Amlogic S805
UC - RAM 1 GB
UC - core 4. Quad Core
UC - Digital pins 40
UC - External memory microSD card
UC - freq 1.6 GHz
UC - Ethernet yes
UC - USB 4x USB
UC - HDMI yes
UC - I2C yes
UC - UART yes
UC - Connector 5V DC 2.5/0.8mm
UC - SPI interface yes
UC - LCD interface no
UC - Camera interface no
UC - Linux yes
UC - Android yes
UC - Windows no
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: