• EOL

Odroid C0 - Amlogic S805 Quad-Core 1,5GHz + 1GB RAM

Index: ODR-06309

Minicomputer Odroid, version C0 with a powerful processor Amlogic S805 quad-core 32-bit ARM 7 Cortex-A5 1.5 GHz. The board has 1GB of DDR3 RAM. The device is a lighter version of the board Odroid C1+. To reduce the size, we resigned from the installation of connectors. It works with Ubuntu 14.04 and Android 4.2.

Odroid C0 - Amlogic S805 Quad-Core 1,5GHz + 1GB RAM
€38.50
€31.30 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Odroid

Attention!

The product has been discontinued. Check others products incategory.
Instead Odroid C0 we recommendRaspberry Pi.

Description of Odroid C0 - Amlogic S805 Quad-Core 1,5GHz + 1GB RAM

Minicomputer Odroid, version C0 with a powerful processor Amlogic S805quad-core 32-bitARM 7Cortex-A5 1.5 GHz. The board has1GB of DDR3 RAM. It works withUbuntu 14.04andAndroid 4.2. The board is a lighter version of the board Odroid C1+. To reduce the size, we resigned from the installation of USB connectors and GPIO so the size of the module is only 58 x 56 x 11 mm.

 

Odroid C0Quad-Core 1,5GHz 1GB RAM

Board has a small size, is very thin which allows to use Odroid C0 even in places where free space is not enough.

In our offer, you will find a special set of connectors for self-assembly.

 

 

What it takes to run minicomputera Odroid?

 

Operating system

Odroid C0 works with Ubuntu 14.04 and Android 4.2 based on kernel 3.10 LTS. The drive of device, can be a microSD card or a memory Flash eMMC 4.5 HS200 module.

 

Systems Ubuntu and Android can be downloaded from the manufacturer's website.

The installation is very simple - check out our manual!

 

Odroid C0 Quad-Core 1,5GHz 1GB RAM

Odroid C0 - distribution of elements on the board.

 

Communication

Odroid has the main communication interfaces, which can be found in office computers of PC class. In addition to the previously listed connectors for audio and video, the user has at his or her disposal:

  • HDMIport - transfers the image on the monitor this socket is soldered by the manufacturer.
  • USB connectors - the possibility of soldering,to which you can connect, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number using an external USB HUB. The kit has no USB connectors, they can be purchased separately.
  • 40 pins of GPIO outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of motors. Among them are the pins, supportting interfaces: I2C, SPI and UART. You must purchase goldpin straps separately and solder them yourself.
  • slot micro SD - slot for microSD memory cards, on which installed can be the operating system.

 

Odroid C1+ z radiatorem Odroid is equipped with a microSD and eMMC connectors on the back of the board. Card is not included, it can be purchased separately.

 

Power

As a power source, the system uses the DC jack connector. The manufacturer recommends that the voltage indicated on the connector had a value of 5.0 V and a minimum output current of the used power supply shall be not less than 2.0 A. At the user's disposal is also a two-pin connector for battery Li-Pol 3.7 V 1S. In our offer, you will finda special adapter.

 

Specifications and comparison

 

Basic information
 
Model Odroid C0 Odroid C1+ Odroid C2 Odroid XU4
Specification
Processor Amlogic S805 Amlogic S805 Amlogic S905 Samsung Exynos5422
The core

Quad-Core 32-bit

ARM Cortex A5

Quad-Core 32-bit

ARM Cortex A5

Quad-Core 64-bit

ARM Cortex-A53

Octa-Core

ARM Cortex-A15

ARM Cortex™-A7

Graphics

ARM Mali 450MP

OpenGL ES

2.0/1.1

ARM Mali 450MP

OpenGL ES

2.0/1.1

ARM Mali 450MP

OpenGL ES

2.0/1.1

3D Mali-T628 MP6

OpenGL ES

3.0/2.0/1.1

Systems

Ubuntu 14.04

Android 4.4

Kernel 3.10 LTS

Ubuntu 14.04

Android 4.4

Kernel 3.10 LTS

Ubuntu 16.04

Android 5.1

Kernel 3.14 LTS

Ubuntu 15.04

Android 4.4.2

Kernel 3.10 LTS

Clock frequency 1.5 GHz 1.5 GHz 1.5 GHz 2 GHz / 1.4 GHz
Architecture ARMv7 ARMv7 ARMv8 ARMv7
RAM

1 GB DDR3

SDRAM

1 GB DDR3

SDRAM 792MHz

2 GB DDR3

SDRAM 792Mhz

2 GB LPDDR3

RAM 750Mhz
Memory

microSD card

UHS1

eMMC4.5 HS200

microSD card

UHS1 up to 16 GB

eMMC4.5

microSD card

UHS1 up to 128 GB

eMMC5.0

microSD card

The UHS1 up to 64 GB

eMMC5.0
Slot for GPIO

Connector 40-pin

+ 7-pin I2S

(for soldering)

Connector 40-pin

+ 7-pin I2S

Connector 40-pin

+ 7-pin I2S

Connector 30-pin

+ 12 pin I2S

pitch of 2mm

Power

5 V / 2 A

DC Jack

5 V / 2 A

DC Jack

5 V / 2 A

DC Jack

5 V / 4 A

DC 2,5x2,1mm

Board sizes 58x56x11mm 85x56x18mm 85x56x18mm 82x58x22mm
Interfaces
USB-Host

2 x USB 2.0

(option

for soldering)

4x USB 2.0

slot, type A

4x USB 2.0

slot, type A

2x USB 3.0

1x USB 2.0

slot, type A

USB OTG -

1x microUSB

1x microUSB -
Network interface -

Ethernet

10/100/1000

Mbit/s

Ethernet

10/100/1000

Mbit/s

Ethernet

10/100/1000

Mbit/s

The RTC system Built-in Built-in - -
Video HDMI HDMI HDMI 2.0 4K/60 Hz HDMI 1.4 a
Audio

HDMI / I2S

HDMi

HDMI / I2S

HDMI

ADC

converter

2 channels

10-bit

2 channels

10-bit

2 channels

10-bit

2 channels

10-bit

Communication

UART, SPI, I2C,

GPIO, ADC

UART, SPI, I2C,

GPIO, ADC

UART, SPI, I2C,

GPIO, ADC

UART, SPI, I2C,

GPIO, ADC

 

 

UC - Microcontroller Amlogic S805
UC - Core Cortex A5
UC - RAM 1 GB
UC - core 4. Quad Core
UC - Digital pins 40
UC - External memory microSD card
UC - freq 1.5 GHz
UC - USB 2x USB
UC - HDMI yes
UC - I2C yes
UC - UART yes
UC - Connector 5V DC 2.5/0.8mm
UC - SPI interface yes
UC - LCD interface no
UC - Camera interface no
UC - Linux yes
UC - Android yes
UC - Windows no
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: