VNH5019 Motor Controller
VNH5019 Motor Controller
VNH5019 Motor Controller
VNH5019 Motor Controller
VNH5019 Motor Controller
VNH5019 Motor Controller
VNH5019 Motor Controller - zdjęcie 1
VNH5019 Motor Controller - zdjęcie 2
VNH5019 Motor Controller - zdjęcie 3
VNH5019 Motor Controller - zdjęcie 4
VNH5019 Motor Controller - zdjęcie 5
VNH5019 Motor Controller - zdjęcie 6

VNH5019 - single-channel 24V / 12A motor controller - Pololu - 1451

Index: PLL-00456
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

Module with ST VNH5019 system working with voltages from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).

€34.65
€28.17 tax excl.

Available, 24h shipping!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Description: Polol VNH5019 - single channel 24V/12A motor controller

The module with a single-channel H VNH3SP30 bridge fromST allows you to control motors supplied with voltage from 5.5 V - 24 V with continuous current consumption up to 12 A, temporary up to 30 A. The system allows changing the direction of motor rotation and speed control via PWM signal.

VNH5019 controller specification

  • Power supply voltages: 5.5 V - 24 V
  • Continuous output current: 12 A
  • Maximum instantaneous current: 30 A
  • PWM frequency: up to 20 kHz
  • Output for current measurement
  • LED indicators
  • Safeguards
    • Before the power supply is incorrectly connected
    • Before the supply voltage is too high and too low
    • Before short circuit to ground and supply voltage

Included:

  • module with VNH5019 control unit
  • power connector
  • goldpin

Minimum number of connections between VNH5019 and microcontroller.

The PWM signal inputs are pulled to ground. The motor power outputs are therefore blocked by default. No potential is set by default on the INA, INB direction control outputs.

The LEDs on the board are very helpful when detecting connection problems. The brightness increases with the motor speed and the color changes with the direction of rotation.

Pin Description
VIN 24 V power supply
VDD Power supply for the logical part 2.5 V to 5 V
VOUT Voltage output behind the reverse power connection protection system.
OUTA Half-bridge A output of the motor supply
OUTB Half-bridge B output of the motor supply
PWM PWM signal input pulled to ground by default (up to 20 kHz)
INA/INB Reversal of direction of rotation. Not connected by default.
GND Mass
CS Current measurement outputs. 140mV on 1A. Active when CS_DIS PIN is low.
ENA/DIAGA Half-bridge A lock. Low state I lock the operation of half-bridge A. By default in high state.
ENB/DIAGB Half-bridge lock B. Low state I'm blocking half-bridge B. Default high state.
CS_DIS Current measurement output blockade. High state I'm blocking the CS output. Default low state.

VNH519 schematic.

VNH3SP30 VNH2SP30 VNH5019
Supply voltage 5.5 – 16 V 5.5 – 16 V 5.5 – 24 V
MOSFET Resistance 34 mΩ type. 19 mΩ max. 18 mΩ type.
Max. PWM frequency 10 kHz 20 kHz 20 kHz
Current measurement output n/a 0.13 V/A 0.13 V/A
Minimum level of logical signals 3.25 V 3.25 V 2.1 V
Overheating time at 20 A 8 s 35 s 20 s
Overheating time at 15 A 30 s 150 s 90 s
Continuous current 9 A 14 A 12 A
Voltage to 5.5 V
Voltage from 24.0 V
Current 12.0 A
Channels 1

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Cyprus, Finland, Greece, Ireland, Lichtenstein, Malta, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

You might also like

Micro Gearmotor HP 30:1 1000RPM with Extended Motor Shaft - Pololu 2212

Polol's miniature 30:1 high power motor with a gearbox, 1000 rpm, 0.57 kg*cm (0.056 Nm) torque. It has an extended shaft for mounting speed sensors.
Index: PLL-00010
Index: PLL-00010
Available, 24h shipping!
(Check quantity)
Regular price €16.05 Price €16.05

TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713

Polol module with a two-channel direct current motor controller. It is powered from 4.5 V to 13.5 V. Continuous current per channel is 1 A, with both channels connected the...
Index: PLL-00032
Index: PLL-00032
Available, 24h shipping!
(Check quantity)
Regular price €3.84 Price €3.84

VNH3SP30 - 36V / 30A motor driver

Single-channel bridge H. Supply voltage: max. 36 V. Continuous current 9 A, instantaneous 30 A. Housing: SO-30 Multipower.
Index: UCC-00097
Index: UCC-00097
Unavailable
Regular price €11.40 Price €11.40

25Dx48L HP Motor with 4.4:1 Gear 6V 2220RPM - Pololu 1570

Polol's 4.4:1 gearbox engine generates 2150 rpm, torque is 1.5 kg*cm (0.14 Nm). Powered by 6 V, average current consumption is approximately 550 mA (max 6500 mA).
Index: PLL-00146
Index: PLL-00146
Available, 24h shipping!
(Check quantity)
Regular price €20.70 Price €20.70

Customers who bought this product also bought:

LSM303DLHC 3-axis digital Accelerometer + Magnetometer - Polol module

A sensor to determine acceleration and magnetic field. The measurement of these quantities is made possible by an integrated 3-axis accelerometer with a magnetometer....
Index: PLL-00796
Index: PLL-00796
Unavailable
Regular price €16.05 Price €16.05

30mm black crocodile connector - 5pcs

Small crocodile connector approx. 30 mm long with black cover. Price for 5 pieces.
Index: KAB-00310
Index: KAB-00310
Unavailable
Regular price €0.35 Price €0.35

30mm red crocodile connector - 5pcs

Small crocodile connector approx. 30 mm long with red cover. Price for 5 pieces.
Index: KAB-00311
Index: KAB-00311
Unavailable
Regular price €0.35 Price €0.35

Heat shrink tube 3.2/1.6 black - 10pcs

Diameter before heat shrink: 3.2 mm, diameter after heat shrink: 1.6 mm. Price for 10 x 1 meter.
Index: NSZ-00088
Index: NSZ-00088
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.53 Price €2.53

Heat shrink tube 2.4 / 1.2 red - 10pcs

Diameter before heat shrink: 2.4 mm, diameter after heat shrink: 1.2 mm. Price for 10 x 1 meter.
Index: NSZ-00084
Index: NSZ-00084
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.30 Price €2.30

Adhesive velcro 70x30 mm 5 packs

Five pieces of self-adhesive Velcro with dimensions of 70 x 30 mm useful e.g. for fixing batteries, receivers, regulators etc. in robots or RC models.
Index: AKC-00643
Index: AKC-00643
Available, 24h shipping!
(Check quantity)
Regular price €1.56 Price €1.56

Automatic insulation stripper ST-02

High-quality automatic insulation puller with cutter.
Index: NSZ-00653
Index: NSZ-00653
Available, 24h shipping!
(Check quantity)
Regular price €4.42 Price €4.42

Cutting pliers 110mm - Vorel 42302

Front cutting pliers for precision work with a length of 110 mm, handle is blue or black.
Index: NSZ-00626
Index: NSZ-00626
Available, 24h shipping!
(Check quantity)
Regular price €1.51 Price €1.51

Connecting cables - female socket - crocodile - 10 pieces

Set of 10 wires. On the one side, there is a standard female socket (for goldpin), on the other end there is the crocodile connector.
Index: KAB-01050
Index: KAB-01050
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.53 Price €2.53

Tact Switch 6x6mm/8mm DIP - 5pcs.

A small monostable button mounted in a through-hole way - THT with the size: 6x6 mm, height: 8 mm. Price per 5 pieces.
Index: SWT-00381
Index: SWT-00381
Czas oczekiwania: ok. 10-30 dni
Regular price €0.23 Price €0.23

Tact Switch 12x12mm with a cap - round red

Push button size 12x12 mm, cap height: 3.5 mm, cap diameter: 10 mm, cap colour: red.
Index: SWT-00385
Index: SWT-00385
Unavailable
Regular price €0.14 Price €0.14

Tact Switch 12x12mm with a cap - round yellow

Push button size 12x12 mm, cap height: 3.5 mm, cap diameter: 10 mm, cap colour: yellow.
Index: SWT-00887
Index: SWT-00887
Unavailable
Regular price €0.14 Price €0.14

Products from the same category

JRK G2 18v19 - single channel USB driver with 30V / 19A feedback - Pololu 3146

Extremely easy to use motor controller with feedback. Communication interfaces available: USB, TTL, I2C, analog and radio. Power supply voltage is 6.5 V to 30 V and continuous...
Index: PLL-12103
Index: PLL-12103
Na zamówienie. Czas oczekiwania 4-6 tyg.
Regular price €83.49 Price €83.49

JRK G2 18 v 19 - single channel USB driver with 30V / 19A feedback - Pololu 3147

Extremely easy to use motor controller with feedback support. Available communication interfaces: USB, TTL, I2C, analog and radio. Supply voltage is from 6.5 V to 40 V and...
Index: PLL-12107
Index: PLL-12107
On request. Waiting time 4-6 weeks.
Regular price €83.49 Price €83.49

RoboClaw 2x45A USB V5 - two-channel 34V/45A engine controller - Pololu 2397

Two-channel DC motor controller. It communicates via microUSB port, UART TTL protocol, analogue signal or RC radio interface. Power supply voltage is from 6 V to 34 V....
Index: PLL-05569
Index: PLL-05569
Na zamówienie. Czas oczekiwania 4-6 tyg.
Regular price €246.51 Price €246.51

RoboClaw 2x7A USB V5B - two-channel 34V/7.5A engine controller - Pololu 3284

Two-channel DC motor controller. It communicates through the microUSB port, UART TTL interface, analogue signal or RC radio interface. Power supply voltage is from 6 V to 34 V....
Index: PLL-05571
Index: PLL-05571
Waiting time approx. 10-21 days
Regular price €99.77 Price €99.77

JRK G2 24v21 - single channel USB driver with 40V / 21A feedback - Pololu 3149

Extremely easy to use motor controller with feedback support. Available communication interfaces: USB, TTL, I2C, analog and radio. Supply voltage is from 6.5 V to 40 V and...
Index: PLL-12124
Index: PLL-12124
On request. Waiting time 4-6 weeks.
Regular price €127.67 Price €127.67

RoboClaw 2x30A USB V5 - two-channel 34V/30A engine controller - Pololu 2396

Two-channel DC motor controller. It communicates via microUSB port, UART TTL protocol, analogue signal or RC radio interface. Power supply voltage is from 6 V to 34 V....
Index: PLL-05573
Index: PLL-05573
Waiting time approx. 10-21 days
Regular price €169.53 Price €169.53

Qik 2s9v1 Dual Serial Motor Controller - Pololu 1110

Dual channel DC motor controller allows you to control the speed and direction of rotation of the motor using a simple serial interface, allowing simple connection of the...
Index: PLL-13730
Index: PLL-13730
Waiting time approx. 10-30 days
Regular price €23.02 Price €23.02

RoboClaw ST 2x45A USB V5 - two-channel 34V/45A engine controller - Pololu 2398

Dual-channel driver for DC motors. Communicates via the microUSB port, UART TTL protocol, analog signal or RC radio interface. The supply voltage ranges from 6 V to 34 V.The DC...
Index: PLL-05439
Index: PLL-05439
Na zamówienie. Czas oczekiwania ok. 4-6 tyg.
Regular price €237.19 Price €237.19

Stepper motor driver HY-DIV268N-5A in case - 48V5A

Stepper motor driver based on the system TB6600 allows you to control the motor with a current consumption of up to 5 A (range is adjustable from 0.2 A to 5 A) on the coil...
Index: MOD-07280
Index: MOD-07280
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.77 Price €19.77

Dual G2 Hihg-Power Motor Driver 18v18 Shield for Arduino - Pololu 3756

Shield with dual-channel driver pf motors operating with voltages from 6.5 V up to 30 V and current up to 18 A per channel (max 50 A). The system can be connected directly with...
Index: PLL-10592
Index: PLL-10592
In stock, shipping 24 hours!
(Check quantity)
Regular price €66.28 Price €66.28

High-Power Simple Motor Controller G2 18v25 - Pololu 1366

Single channel powerful DC motor controller. It can be easily programmed via microUSB connector and dedicated application. Continuous current per channel is 25 A, motor supply...
Index: PLL-13428
Index: PLL-13428
Waiting time approx. 4 weeks
Regular price €50.93 Price €50.93

TLC5940 - controller, PWM generator - SparkFun BOB-10616

16-channel PWM signal generator. It communicates via the SPI bus. It can be used as an LED driver, the controller of revolutions of the DC motors and the servo controller.
Index: SPF-01856
Index: SPF-01856
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.88 Price €17.88