TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450

Index: SPF-10666 EAN: 5904422316532

SparkFun module with two channel DC motor driver. It is powered from 2.7 V to 15 V. Continuous current per channel is 1.2 A. It has soldered goldpin connectors.

TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450
€20.50
€16.67 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: SparkFun
Compatibility: Arduino Raspberry Pi

Product description: TB6612FNG - 15V / 1.2A dual channel motor driver with connectors - SparkFun ROB-14450

The H-bridgeTB6612FNGis a powerfulmotor controllerin a small andSSOP24 housing. SparkFun has met the users' expectations and created a module containingTB6612FNGchip and passive components needed for its proper operation.

SparkFun TB6612FNG - dwukanałowy sterownik silników

Specification

  • Power supply for motors (VMOT): 2,7 V to 15 V
  • Logic power supply (VCC): from 2.7 V to 5.5 V
  • Maximum output current: 3.2 A per channel
  • Continuous output current: 1.2 A per channel
  • Maximum PWM frequency: 100 kHz
  • Built-in thermal shutdown circuit
  • Filter capacitors on both power supply lines
  • Protection against reverse current from motors
  • Soldered goldpin leads

Product compatible with Arduino

Manufacturer prepareduser guidewith program forArduinousers.

Leads

Signals are connected to traditional pins (2,54 mm pitch). Module can be plugged intocontact boardor connected bywires.

Pin Description
VCC Power supply for logic part.
VMOT Power supply for motors.
GND Ground.
A01 A02 Channel A outputs.
B01 B02 Channel B outputs.
PWMA PWM signal of channel A.
PWMB PWM signal of B channel.
STBY Should be pulled up to VCC to turn on the system, low state (default) switches the system to sleep state (low power consumption).
AIN1, AIN2 Controls the direction of channel A.
BIN1, BIN2 Controls the direction of channel B.

All logic signals are internally pulled to ground. The maximum PWM frequency is 100 kHz.

TB6612 controller truth table

AIN1
BIN1

AIN2
BIN2

PWMA
PWMB
Outputs
motors

state
high

state
low

% fill

(different from zero)

The motor turns clockwise at the maximum speed set by pwm (different from 0).
state
low
state
high

% fill

(different from zero)

The motor turns at the maximum speed set via pwm (different from 0) counterclockwise.
state
low
state
low
no
meaning

free braking

(soft stop)

state
high
state
high

meaningless

soft stop

(soft stop)

no
meaning
no
meaning

low state

0% filling


(hard-stop).

The TB6612 chip can be used as a controller forPololu micromotors. If the motors will be exposed to stalling, it is recommended to merge the channels to achieve higher current capacity. To do this, connect the following leads together:

  • AO1 with BO1
  • A02 with BO2
  • PWMA with PWMB
  • AIN1 with BIN1
  • AIN2 with BIN2

Video describing operation of H-bridge - DC motor driver.

Voltage to 2.7 V
Voltage from 15.0 V
Current 1.2 A
Channels 2
Package width 5 cm
Package height 1.1 cm
Package depth 8 cm
Package weight 0.003 kg

Be the first to ask a question about this product!

Product reviews

TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: