Cytron MDDRC10 - two-channel driver for DC 10A 7V-30V motors

Index: CTN-18994 EAN: 5904422360900
Two channel DC motor driver with supply voltage from 7 V to 30 V. Continuous current consumption per channel is 10 A, and momentary 30 A. When the controller is switched on, an automatic calibration takes place. In addition, the controller module is equipped with manual buttons that allow quick testing of the system. The information about what state is on the motor output is indicated by LEDs. The controller is also equipped with protections protecting the module from delivering too high voltage.
Cytron MDDRC10 - two-channel driver for DC 10A 7V-30V motors
€40.90
€33.25 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Cytron

Product description: Cytron MDDRC10 - DC 10A 7V-30V dual channel motor driver

Dual channelDCmotor controllerwith supply voltagefrom 7 V to 30 V. Continuous current consumption per channel is10 A, and momentary30 A. When the controller is switched on, an automatic calibration takes place. In addition, the controller module is equipped with manual buttons that allow quick testing of the system. The information about what state is on the motor output is indicated by LEDs. The controller is also equipped with protections that prevent the module from delivering too high voltage.

Dwukanałowy sterownik silników prądu stałego DC MDDRC10 wyprodukowany przez Cytron.

Two-channel DC motor controller MDDRC10 manufactured by Cytron.

Schemat podłączenia sterownika Cytron MDDRC10 z dwoma silnikami prądu stałego DC oraz zasilaniem.

Cytron MDDRC10 controller wiring diagram with two DC motors and power supply.

Cytron MDDRC10 pinouts

The Cytron MDDRC10 controller has been equipped with 6 screw connectors to which the motors and power supply should be connected. The voltage should be within the range of 7 V to 30 V. The wiring diagram is shown in the photo opposite.

Attention!
The module does not have reverse polarity protection, so check carefully the power supply connection.

Technical specification

  • Plug and Play function and control directly from the RC level
  • Automatic calibration after switching on the controller
  • Two input modes to choose from
  • Bidirectional control for two DC brush motors
  • Operating voltage: 7 V to 30 V DC
  • Maximum motor current consumption:
    • continuous: 10 A
    • momentary: 30 A
  • Number of channels: 2
  • Equipped with quick system test buttons
  • Information about the motor output status via LEDs
  • PWM speed control frequency: up to 20 kHz
  • Protection: overcurrent with active current limit and undervoltage protection
  • Thermal protection
  • Dimensions: 88,90 x 48,3 mm
Moduł został wyposażony w przyciski, które pozwalają na szybkie dokonanie testu układu.

The module has been equipped with buttons, which allow quick testing of the circuit.

W skład zestawu wchodzą również nylonowe tuleje dystansowe umożliwiające montaż modułu z innymi urządzeniami.

The kit also includes nylon spacer sleeves, which allow the module to be mounted with other devices.

Set contents

Voltage to 7.0 V
Voltage from 30.0 V
Channels 2
Package width 7 cm
Package height 2 cm
Package depth 11 cm
Package weight 0.054 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: