• EOL

VNH3SP30 - two-channel 36V/9A engine controller - Pololu 707

Index: PLL-03357 EAN: 5904422331740

Module with two ST VNH3SP30 systems operating at voltages from 5.5 V to 16 V. The maximum continuous output current is 9 A (momentary: 30 A).

VNH3SP30 - two-channel 36V/9A engine controller - Pololu 707
€45.00
€36.59 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Product description: Polol VNH3SP30 - two-channelmotor controller 36 V / 9 A

ST'sH VNH3SP30bridge module with twoH VNH3SP30bridges allows you to control two motors supplied with voltagesfrom 5.5 V to 36 V witha continuous current consumption of up to 9 A, temporarily up to 30 A. The system allows the change of the direction of motor rotation and speed control via PWM signal.

In order to increase the current capacity, the controller channels can be connected. In this way, the system will operate one motor, but its continuous current output will increase to 15 A.

Downloads

PIN Description
VIN Power to the system.

OUT1A

OUT1B

Outputs to connect channel 1 motor.

OUT1A

OUT1B
Outputs to connect channel 2 motor.
1PWM The PWM signal input is pulled to channel 1 ground by default.
2PWM The PWM signal input is pulled to channel 2 ground by default.

1INA

1INB

The inputs for changing the direction of rotation of channel no. 1.

2INA

2INB

The inputs for changing the direction of rotation of channel 2.
GND Mass potential.

1CS

Current measurement outputs of channel 1. Available only in VNH2SP30 version.

2CS

Current measurement outputs of channel 2. Available only in VNH2SP30 version.

1DIAG

EN

If a low state is given, channel 1 is disabled.

By default in high state, pulled to VCC by a 4.7 kΩ resistor.

2DIAG

EN

If a low state is given, channel 2 is disabled.

By default in high state, pulled to VCC by a 4.7 kΩ resistor.

Video

Film describing the operation of the H-bridge - DC motor controller.

Specification of a two-channel 36 V / 9 A motor controller

  • Supply voltage: 5.5 V to 36 V
  • Continuous output current per channel: 9 A
  • Maximum instantaneous current per channel: 30 A
  • Continuous output current at channel connection: 15 A
  • PWM frequency: up to 10 kHz
  • Number of engines supported: 2
  • Protection against incorrect power supply
  • Included: module, power connector, gold pin.

Voltage to 5.5 V
Voltage from 36 V
Current 9 A
Channels 2
Package width 8 cm
Package height 12 cm
Package depth 0.9 cm
Package weight 0.024 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: