VNH3SP30- motor controller - module
VNH3SP30- motor controller - module
VNH3SP30- motor controller - module
VNH3SP30- motor controller - module - zdjęcie 1
VNH3SP30- motor controller - module - zdjęcie 2
VNH3SP30- motor controller - module - zdjęcie 3

VNH3SP30 - single-channel MD01B 16V/9A motor controller - Pololu 705

Index: PLL-00745

Module with ST's VNH3SP30 system working with voltages from 5.5 V to 16 V. The maximum continuous output current is 9 A (momentary: 30 A).

€25.47
€20.70 tax excl.

Available, 24h shipping!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Description: Polol VNH3SP30 - single channel motor controller MD01B 16V/9A

The module with a single-channel H VNH3SP30 bridge fromST allows you to control motors supplied with voltages in the range of 5.5 V - 16 V with continuous current consumption up to 9 A, momentary up to 30 A. The system allows changing the direction of motor rotation and speed control via PWM signal.

PIN Description
VIN Engine power.
OUTA Half-bridge A output of the motor power supply.
OUTB Half-bridge B output of the motor power supply.
PWM PWM signal input pulled to ground by default (up to 10KHz)
INA/INB Reversal of direction of rotation.
GND Mass potential.
CS Current measurement outputs. Only available in VNH2SP30 version.

Diagram of the VNH3SP30 module.

Overview of the VNH series

VNH3SP30 VNH2SP30 VNH5019
Supply voltage 5.5 – 16 V 5.5 – 16 V 5.5 – 24 V
MOSFET Resistance 34 mΩ type. 19 mΩ max. 18 mΩ type.
Max. PWM frequency 10 kHz 20 kHz 20 kHz
Current measurement output n/a 0.13 V/A 0.13 V/A
Minimum level of logical signals 3.25 V 3.25 V 2.1 V
Overheating time at 20 A 8 s 35 s 20 s
Overheating time at 15 A 30 s 150 s 90 s
Continuous current 9 A 14 A 12 A

Polol VNH3SP30 motor controller specification

  • Power supply voltage: 5.5 V - 16 V
  • Continuous output current: 9 A
  • Maximum instantaneous current: 30 A
  • PWM frequency: up to 10 kHz
  • Protection against incorrect power supply

Included:

  • Motor Controller
  • Power connector
  • Goldpin slat
Voltage to 5.5 V
Voltage from 16.0 V
Current 9 A
Channels 1

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Pololu 37Dx52L Motor with 19:1 Gear 6V 500RPM

Polol's 499:1 gearbox motor generates 500 rpm, torque is 5.0 kg*cm (0.49 Nm). Powered from 6 V to 12 V, average current consumption is approximately 300 mA (max 5 A).
Index: PLL-00049
Index: PLL-00049
Unavailable
Regular price €24.42 Price €24.42
  • Free shipping

VNH3SP30 - 36V / 30A motor driver

Single-channel bridge H. Supply voltage: max. 36 V. Continuous current 9 A, instantaneous 30 A. Housing: SO-30 Multipower.
Index: UCC-00097
Index: UCC-00097
Unavailable
Regular price €11.40 Price €11.40
  • Free shipping

25Dx48L HP Motor with 4.4:1 Gear 6V 2220RPM - Pololu 1570

Polol's 4.4:1 gearbox engine generates 2150 rpm, torque is 1.5 kg*cm (0.14 Nm). Powered by 6 V, average current consumption is approximately 550 mA (max 6500 mA).
Index: PLL-00146
Index: PLL-00146
Available, 24h shipping!
(Check quantity)
Regular price €20.70 Price €20.70
  • Free shipping

25Dx48L LP Motor with 4.4:1 Gear 6V 1300RPM - Pololu 1581

Polol's 4.4:1 gearbox engine generates 1280 rpm, torque is 0.6 kg*cm (0.05 Nm). Powered by 6 V, the average current consumption is approximately 250 mA (max 2400 mA).
Index: PLL-00743
Index: PLL-00743
Available, 24h shipping!
(Check quantity)
Regular price €18.58 Price €13.01
  • Free shipping
  • Reduced price
  • On sale

Customers who bought this product also bought:

Male Headers 1x40 raster 2,54mm straight

Goldpin male 1x40 strap, pitch is 2.54 mm.
Index: KAB-00192
Index: KAB-00192
Unavailable
Regular price €0.16 Price €0.16
  • Free shipping

LCD display 4x20 characters green

Symbol: JHD204A-YG. Driver compatible with HD44780. Backlight: yellow-green. Character color: black.
Index: LCD-01136
Index: LCD-01136
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.02 Price €6.02
  • Free shipping
Index: PLL-00399
Unavailable
Regular price €1.16 Price €1.16
  • Free shipping

Nuts 4-40, 25pcs

Index: NSZ-00403
Index: NSZ-00403
Unavailable
Regular price €0.93 Price €0.93
  • Free shipping

Sprocket POM ZYZ-15A50-20-05P

Number of teeth: 20. Module: 0.5. Hole: 1.9mm. Pitch diameter dp: 10mm.
Index: ZEB-01157
Index: ZEB-01157
Unavailable
Regular price €0.23 Price €0.23
  • Free shipping

Sprocket POM ZYZ-15A50-60-05P

Number of teeth: 60. module: 0.5. hole: 1.9 mm. Pitch diameter dp: 30 mm.
Index: ZEB-01164
Index: ZEB-01164
Unavailable
Regular price €0.60 Price €0.60
  • Free shipping

Arduino Mega 2560 Rev3 - module A000067

Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...
Index: ARD-01062
Index: ARD-01062
In stock, shipping 24 hours!
(Check quantity)
Regular price €36.98 Price €36.98
  • Free shipping

LCD display 2x16 green characters

Symbol: JHD162A-YG. Driver compatible with HD44780. Backlight: yellow-green. Character color: black.
Index: LCD-00223
Index: LCD-00223
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.07 Price €2.07
  • Free shipping

Single row goldpin 1x40 raster 2,54mm - female

Single-row, female slat. Raster : 2.54 mm.
Index: KAB-01103
Index: KAB-01103
Available, 24h shipping!
(Check quantity)
Regular price €0.21 Price €0.21
  • Free shipping

Tact Switch 6x6mm/13mm DIP - 5pcs.

A small monostable button mounted in a through-hole way - THT with two pins with the size: 6x6 mm, height: 13 mm. The price is for 5 pieces.
Index: SWT-00380
Index: SWT-00380
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.46 Price €0.46
  • Free shipping

Connecting cables female-male 20cm - 40pcs

Set includes 40 PCs of multi-colored connecting cables with a length of 20 cm, on one side ended with a female  connector, on the other, with a male connector.
Index: KAB-01067
Index: KAB-01067
Czas oczekiwania: ok. 10-30 dni
Regular price €1.38 Price €1.38
  • Free shipping

AVR Programming Board

AVR Programming Board is designed for programming microcontrollers from the Atmel AVR family in cased: DIP8, DIP20, DIP28, DIP40.
Index: MOD-01357
Index: MOD-01357
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.44 Price €7.44
  • Free shipping

Products from the same category

DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135

Two-channel DC motor controller. Continuous current per channel 1.2 A (momentary to 1.5 A). Power supply from 2.0 to 11 V.
Index: PLL-00851
Index: PLL-00851
Available, 24h shipping!
(Check quantity)
Regular price €4.16 Price €4.16
  • Free shipping

L298N Dual H Bridge DC StepperMotor Driver Board - Iduino ST1112

Module with a two-channel direct current motor controller L298N. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The system has a built-in voltage regulator...
Index: MOD-08227
Index: MOD-08227
Available, 24h shipping!
(Check quantity)
Regular price €5.09 Price €5.09
  • Free shipping

TB6612 Motor Shield - 4x DC motor driver - 12V/1,2 A - Shield for Arduino

The module allows you to control four DC motors (DC), with two stepper motors or two servos using Arduino kits. The system allows you to adjust the direction and speed of...
Index: GRL-12811
Index: GRL-12811
In stock, shipping 24 hours!
(Check quantity)
Regular price €23.23 Price €23.23
  • Free shipping

Motor regulator DC 12-40V / 10A / 400W - with a speed control knob

A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
Available, 24h shipping!
(Check quantity)
Regular price €5.79 Price €5.79
  • Free shipping

Cytron Maker Drive MX1508 - two-channel motor controller 9.5V/1A

Simple to use, two-channel DC motor controller, equipped with bridge H. Continuous current per channel is 1 A (momentary 1.5 A). Power supply from 2.5 V to 9.5 V. Output...
Index: CTN-13999
Index: CTN-13999
Available, 24h shipping!
(Check quantity)
Regular price €4.07 Price €4.07
  • Free shipping

MAX14870 - single-channel motor controller 36V / 1.7A - Pololu 2961

Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 2.5 A). Supply voltage from 4.5 V to 36 V.
Index: PLL-04200
Index: PLL-04200
Available, 24h shipping!
(Check quantity)
Regular price €5.33 Price €5.33
  • Free shipping

Cytron MDD3A - dual-channel 16V / 3A motor controller

The Cytron MDD3A motor controller has the ability to control 2 DC motors or 1 stepper motor. Continuous current per channel is 3 A (momentary 5 A). Supply voltage is from 4 V...
Index: CTN-15819
Index: CTN-15819
Available, 24h shipping!
(Check quantity)
Regular price €7.56 Price €7.56
  • Free shipping

DFRobot HR8833 - two-channel driver for DC 10V / 1,5A motors

A miniature, two-channel DC motor controller. The device operates on the basis of PWM signal. The motor supply voltage is from 3.3 V to 10 V, maximum current is 1.5 A.
Index: DFR-06934
Index: DFR-06934
Available, 24h shipping!
(Check quantity)
Regular price €4.64 Price €4.64
  • Free shipping

Cytron MD13S - single-channel 30V / 13A motor controller

Single-channel DC motor controller. Continuous current per channel 13 A (momentary 30 A). Supply voltage from 5 V to 30 V. There is a Grove connector on the board.
Index: CTN-12412
Index: CTN-12412
Waiting time approx. 4-6 weeks
Regular price €9.98 Price €9.98
  • Free shipping

Cytron MDD10A - dual-channel 30V / 10A motor controller

Two-channel DC motor controller. Continuous current per channel is 10 A (momentary 30 A) . Supply voltage is 5 V to 30 V . The controller works with logical voltage 3.3 V...
Index: CTN-15818
Index: CTN-15818
Available, 24h shipping!
(Check quantity)
Regular price €20.70 Price €20.70
  • Free shipping

DFRobot TB6612 - 4-channel motor driver 13.5V/1.2A - Shield for Arduino

The module allows you to control four DC motors (DC) using boards of the Arduino. The system allows you to adjust the direction and rotation speed of the motors with a current...
Index: DFR-07441
Index: DFR-07441
In stock, shipping 24 hours!
(Check quantity)
Regular price €14.86 Price €14.86
  • Free shipping

VNH5019 - single-channel 24V / 12A motor controller - Pololu - 1451

Module with ST VNH5019 system working with voltages from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).
Index: PLL-00456
Index: PLL-00456
Available, 24h shipping!
(Check quantity)
Regular price €22.33 Price €22.33
  • Free shipping