Micro motor N20-BT02 5:1 4000RPM - 12V

Index: DNG-12542 EAN: 5904422306472

N20 series miniature motor with 5:1 gearing, has 4000 RPM, torque is 0.1 kg*cm (0.0098 Nm). The supply voltage is from 3V to 12V.

€4.32
€3.51 tax excl.
Available, 24 hours shipping!
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: N20 Motors

Specification

Power supply voltage:

3 V - 12 V

Non load current (12 V):

85 mA

Speed without load (12 V):

4000 rpm

Torque (12 V):

0.1 kg*cm (0.0098 Nm)

Gear ratio:

5:1

Shaft diameter:

3 mm

Body dimensions:

24 x 10 x 12 mm

The weight:

10 g

Two-sided shaft:

NO

Description

The small, lightweight yet powerful N20 series engines, compatible with Polol's engines, are used as drive units by robot constructors. The units can be powered up to 12 volts (depending on the model), with a power output of over 3 volts. The optimum voltage at which the power to strength ratio is best is 6 V.

Silnik N20

Motor dimensions

The motor body is a 24 x 10 x 12 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.

The drawing shows the dimensions of the micro motor with the gearbox.

Accessories

The N20 motors are compatible with Polol motor accessories.

Silnik N20

  • Wheels, crawlers,hubs:Wealso offer wheels and crawlers, matching Pololmicroengine shafts. Installation of non-standard wheels is facilitated by adapters.


Silnik N20

Silnik N20

Attention!

N20 motors are not compatible with micro Polol motor encoders.

Diameter 12 mm
Length 24 mm
Voltage to 3.0 V
Voltage from 12.0 V
Motor - current 100 mA
Motor - gear 5:1
Rotation speed 4000 obr/min
Torque 0.1 kg*cm
Mass 10 g
Motor - shaft 3 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

ESP8266 wifi module + NodeMcu v3

Wi-fi module, based on ESP8266 system. On Board 10 GPIO ports (each of which can handle PWM, I2C and 1-wire), built-in 10-bit ADC and a converter USB-UART. It has installed...
Index: MOD-08241
Index: MOD-08241
In stock, shipping 24 hours!
Check quantity
Regular price €5.40 Price €5.40

Relay NT73-2C-S12 - 12V coil, 2x 12A/125VAC contacts

Coil voltage: 12 VDC, contacts: 12 A / 125 V AC. Dimensions: 19.5 x 15.6 mm, height: 15,3 mm.
Index: PAS-02840
Index: PAS-02840
In stock, shipping 24 hours!
Check quantity
Regular price €0.69 Price €0.69

Cell holder for 1x 18650

A basket for one 18650 type battery. It has wires with insulation removed at their ends, which facilitates installation of the device.
Index: AKC-05242
Index: AKC-05242
Delivery scheduled for 2022-05-27
Regular price €0.42 Price €0.42

Step-Down Voltage Converter D24V22F5 - 5V 2,5A - Pololu 2858

Converter, type step down, with an output voltage of 5 V. Maximum current is 2.5 A. The voltage is in the range of 5.3 V to 36 V. Module dimensions - 18 x 18 mm.
Index: PLL-04978
Index: PLL-04978
In stock, shipping 24 hours!
Check quantity
Regular price €25.82 Price €25.82

TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713

Pololu module with dual channel DC motor driver. It is powered from 4.5 V to 13.5 V. The continuous current per channel is 1 A, when both channels are connected the value...
Index: PLL-00032
Index: PLL-00032
Available, 24 hours shipping!
Check quantity
Regular price €13.87 Price €13.87

40x7mm Wheels - red - Pololu 1453

Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-03744
Index: PLL-03744
Delivery scheduled for 2022-06-10
Regular price €3.88 Price €3.88

Ball Caster 1/2'' - plastic - Pololu 952

Lightweight plastic ball in the bowl with a diameter of 0.5 inches. It is ideal to use to support the front of the two-wheeled robot.
Index: PLL-00021
Index: PLL-00021
In stock, shipping 24 hours!
Check quantity
Regular price €2.58 Price €2.58

Battery storage case for 6 packs AA (R6) - 2x3

Basket for six AA batteries (big fingers).
Index: AKC-02430
Index: AKC-02430
Available, 24h shipping!
Check quantity
Regular price €1.06 Price €1.06

Battery clip 9V (6F22) with cable

A connector to facilitate the connection of popular 9-volt (6F22) batteries with cables with insulation removed at the ends.
Index: AKC-05502
Index: AKC-05502
Available, 24h shipping!
Check quantity
Regular price €0.28 Price €0.28

Battery Blow Super Heavy Duty 6F22 9V

Blow Super Heavy Duty 6F22 battery with 9 V nominal voltage.
Index: AKU-04381
Index: AKU-04381
Available, 24h shipping!
Check quantity
Regular price €0.43 Price €0.43

Trim with QTR-3A reflective sensors - analog - Pololu 2456

Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.
Index: PLL-01730
Index: PLL-01730
In stock, shipping 24 hours!
Check quantity
Regular price €5.19 Price €5.19

Mounting potentiometer 10kΩ - 5pcs

Mounting potentiometer, horizontal RM-065 in through-hole housing with 10 kΩ resistance. Price for 5 pieces.
Index: PAS-00307
Index: PAS-00307
Available, 24 hours shipping!
Check quantity
Regular price €0.43 Price €0.43

Products from the same category

Micro motor N20-BT09 298:1 100RPM - 12V

The N20 series miniature motor with 298:1 gearing, has 100 RPM, torque is 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12548
Index: DNG-12548
Waiting for confirmation of delivery date
Regular price €4.32 Price €4.32

Micro motor N20-BT05 50:1 625RPM - 12V

N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is 1.1 kg*cm (0.108 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12545
Index: DNG-12545
Waiting for confirmation of delivery date
Regular price €4.32 Price €4.32

Micro motor N20-BT07 100:1 320RPM - 12V

The N20 series miniature motor with 100:1 gearing, has 320 RPM , torque is 2.2 kg*cm (0.216 Nm). The supply voltage is from 3 V to 12 V.
Index: DNG-12547
Index: DNG-12547
Waiting for confirmation of delivery date
Regular price €4.32 Price €4.32

Micro motor N20-BT01 75:1 220RPM - 6V

N20 series miniature motor with 75:1 gearing, has 220 RPM , torque is 0.8 kg*cm (0.078 Nm). The supply voltage is from 1 V to 6 V.
Index: DNG-12541
Index: DNG-12541
Waiting for confirmation of delivery date
Regular price €4.32 Price €4.32

Micro motor N20-BT24 50:1 625RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is equal to 1.1 kg*cm (0.107 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12566
Index: DNG-12566
Waiting for confirmation of delivery date
Regular price €5.40 Price €5.40

Micro motor N20-BT43 210:1 100RPM - 6V

The miniature motor of N20 series with 210:1 gearing, has 100 rpm, torque is 2.6 kg*cm (0.255 Nm). The supply voltage is 6 volts.
Index: DNG-12605
Index: DNG-12605
Waiting for confirmation of delivery date
Regular price €5.40 Price €5.40

Micro motor N20-BT39 1000:1 14RPM - 9V

The N20 series miniature motor with 1000:1 gearing, has 14 RPM, torque is equal to 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12600
Index: DNG-12600
Waiting for confirmation of delivery date
Regular price €7.16 Price €7.16

Micro motor N20-BT34 298:1 45RPM - 9V

The miniature motor in the N20 series with 298:1 gearing, has 45 RPM , and the torque is 2.9 kg*cm (0.284 Nm) . The supply voltage ranges from 3 V to 9 V.
Index: DNG-12593
Index: DNG-12593
Waiting for confirmation of delivery date
Regular price €5.40 Price €5.40

Micro motor N20-BT44 250:1 90RPM - 6V

The N20 series miniature motor with 250:1 gearing, has 90 RPM, torque is equal to 3 kg*cm (0.294 Nm). The supply voltage is 6 volts.
Index: DNG-12606
Index: DNG-12606
Waiting for confirmation of delivery date
Regular price €4.32 Price €4.32

Micro motor N20-BT35 150:1 200RPM - 9V

The N20 series miniature motor with 150:1 gearing, has 200 RPM , torque is 2.9 kg*cm (0.284 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12594
Index: DNG-12594
Waiting for confirmation of delivery date
Regular price €4.32 Price €4.32

Micro motor N20-BT41 100:1 150RPM - 6V

The N20 series miniature motor with 100:1 gearing, has 150 RPM, torque is 0.3 kg*cm (0.029 Nm). The supply voltage is 6 volts.
Index: DNG-12603
Index: DNG-12603
Waiting for confirmation of delivery date
Regular price €5.40 Price €5.40

Micro motor N20-BT17 50:1 250RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 250 RPM, torque is 0.5 kg*cm (0.049 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12556
Index: DNG-12556
Waiting for confirmation of delivery date
Regular price €4.32 Price €4.32