N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 1
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 2
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 3
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 4
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 5
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 6
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 7
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 8
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 9
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 10
N20-BT05 micro 50:1 625RPM - 12V motor - zdjęcie 11

Micro motor N20-BT05 50:1 625RPM - 12V

Index: DNG-12545
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is 1.1 kg*cm (0.108 Nm). The supply voltage is from 3V to 12V.

€4.48
€3.64 tax excl.

Available, 24 hours shipping!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: N20 Motors

Specification

Power supply voltage:

3 V - 12 V

Non load current (12 V):

60 mA

Speed without load (12 V):

625 rpm

Torque (12 V):

1.1 kg*cm (0.108 Nm)

Gear ratio:

50:1

Shaft diameter:

3 mm

Body dimensions:

24 x 10 x 12 mm

The weight:

10 g

Two-sided shaft:

NO

Description

The small, lightweight yet powerful N20 series engines, compatible with Polol's engines, are used as drive units by robot constructors. The units can be powered up to 12 volts (depending on the model), with a power output of over 3 volts. The optimum voltage at which the power to strength ratio is best is 6 V.

Silnik N20

Motor dimensions

The motor body is a 24 x 10 x 12 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.

The drawing shows the dimensions of the micro motor with the gearbox.

Accessories

The N20 motors are compatible with Polol motor accessories.

Silnik N20

  • Wheels, crawlers,hubs:Wealso offer wheels and crawlers, matching Pololmicroengine shafts. Installation of non-standard wheels is facilitated by adapters.


Silnik N20

Silnik N20

Attention!

N20 motors are not compatible with micro Polol motor encoders.

Diameter 12 mm
Length 24 mm
Voltage to 3.0 V
Voltage from 12.0 V
Motor - current 100 mA
Motor - gear 50:1
Rotation speed 625 obr/min
Torque 1.1 kg*cm
Mass 10 g
Motor - shaft 3 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Micro motor N20-BT04 30:1 1000RPM - 12V

N20 series miniature motor with 30:1 gearing, has 1000 RPM , torque is 0.6 kg*cm (0.059 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12544
Index: DNG-12544
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT03 10:1 3000RPM - 12V

N20 series miniature motor with 10:1 gearing, has 3000 rpm , torque is 0.3 kg*cm (0.029 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12543
Index: DNG-12543
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Limit switch mini - WK601 - 5 pcs

Limit switch with lever. Maximum operating parameters: voltage of 250 V and current of 5 A. 5 pcs.
Index: PAS-00927
Index: PAS-00927
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.10 Price €1.10

PCF8591 - A/D and D/A converter, 8-bit I2C v2

Module with A/D converter - 4 channels and D/A - 1 output. It works with voltage from 2.5 V to 6.0 V, and communicates over I2C. The board also contains: potentiometer,...
Index: MOD-02632
Index: MOD-02632
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.35 Price €3.35

Step-down Voltage Inverter LM2596 - 3,2V-35V 3A

Module with pulse inverter step-down LM2596. Input voltage from 3.2 V to 40 V. Maximum continuous output current of 3 A. The output voltage is adjustable from 3.2 V to 35 V.
Index: MOD-02967
Index: MOD-02967
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.91 Price €1.91

Breadboard - 830 holes

Breadboard is used for creating and testing electronic circuits without the need for soldering. Version with 830 holes, the size of 165 x 53 mm. Stripes (blue and red) help in...
Index: PLY-00055
Index: PLY-00055
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.73 Price €1.73

Set of 120 cables -3 x 40pcs

This pack contains 3 times for 40 PCs of multi-colored connecting wires: male to male, male to female and female to female with length of 20 cm.
Index: KAB-01958
Index: KAB-01958
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.94 Price €3.94

Set of 350 wires for breadboards

Set of 350 wires of different length to connect the fields on the breadboards (test).
Index: KAB-00741
Index: KAB-00741
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.38 Price €9.38

Set of CF THT 1/4W resistors described - 1000pcs.

A set of 20 values of through hole resistors 0,25 W with tolerance of 5 %, 50 pieces of each. The elements are signed which facilitates finding the desired value.
Index: PAS-01039
Index: PAS-01039
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.48 Price €4.48

Set of passive electronic components + organizer

A set of electronic elements required in the design on the breadboards. Set includes i.a.: resistors, capacitors, potentiometers, buttons, and LEDs. All packed in an organizer...
Index: PAS-11726
Index: PAS-11726
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.08 Price €8.08

Rectifier diodes 1N4004 1A/400V - 10 pieces

Rectifier diode, the maximum operating voltage 400 V, current up to 1A . Price for 10 pieces.
Index: PAS-01778
Index: PAS-01778
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.27 Price €0.27

Organizer NUF3L

Lockable, transparent organizer, box with a handle of 245 x 214 x 100. It is used to store small electronic components.
Index: PRP-09951
Index: PRP-09951
Available, 24h shipping!
(Check quantity)
Regular price €2.23 Price €2.23

Products from the same category

Micro motor N20-BT09 298:1 100RPM - 12V

The N20 series miniature motor with 298:1 gearing, has 100 RPM, torque is 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12548
Index: DNG-12548
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT07 100:1 320RPM - 12V

The N20 series miniature motor with 100:1 gearing, has 320 RPM , torque is 2.2 kg*cm (0.216 Nm). The supply voltage is from 3 V to 12 V.
Index: DNG-12547
Index: DNG-12547
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT01 75:1 220RPM - 6V

N20 series miniature motor with 75:1 gearing, has 220 RPM , torque is 0.8 kg*cm (0.078 Nm). The supply voltage is from 1 V to 6 V.
Index: DNG-12541
Index: DNG-12541
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT24 50:1 625RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is equal to 1.1 kg*cm (0.107 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12566
Index: DNG-12566
Available, 24 hours shipping!
(Check quantity)
Regular price €4.28 Price €4.28

Micro motor N20-BT43 210:1 100RPM - 6V

The miniature motor of N20 series with 210:1 gearing, has 100 rpm, torque is 2.6 kg*cm (0.255 Nm). The supply voltage is 6 volts.
Index: DNG-12605
Index: DNG-12605
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT39 1000:1 14RPM - 9V

The N20 series miniature motor with 1000:1 gearing, has 14 RPM, torque is equal to 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12600
Index: DNG-12600
Available, 24 hours shipping!
(Check quantity)
Regular price €7.43 Price €7.43

Micro motor N20-BT34 298:1 45RPM - 9V

The miniature motor in the N20 series with 298:1 gearing, has 45 RPM , and the torque is 2.9 kg*cm (0.284 Nm) . The supply voltage ranges from 3 V to 9 V.
Index: DNG-12593
Index: DNG-12593
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT44 250:1 90RPM - 6V

The N20 series miniature motor with 250:1 gearing, has 90 RPM, torque is equal to 3 kg*cm (0.294 Nm). The supply voltage is 6 volts.
Index: DNG-12606
Index: DNG-12606
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT35 150:1 200RPM - 9V

The N20 series miniature motor with 150:1 gearing, has 200 RPM , torque is 2.9 kg*cm (0.284 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12594
Index: DNG-12594
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT41 100:1 150RPM - 6V

The N20 series miniature motor with 100:1 gearing, has 150 RPM, torque is 0.3 kg*cm (0.029 Nm). The supply voltage is 6 volts.
Index: DNG-12603
Index: DNG-12603
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT17 50:1 250RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 250 RPM, torque is 0.5 kg*cm (0.049 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12556
Index: DNG-12556
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT39 1000:1 32RPM - 9V

The N20 series miniature motor with 1000:1 gearing, has 32 RPM, torque is 9 kg*cm (0.883 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12601
Index: DNG-12601
Available, 24 hours shipping!
(Check quantity)
Regular price €7.43 Price €7.43