N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 1
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 2
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 3
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 4
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 5
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 6
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 7
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 8
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 9
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 10
N20-BT40 micro 5:1 3000RPM - 6V motor - zdjęcie 11

Micro motor N20-BT41 100:1 150RPM - 6V

Index: DNG-12603
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

The N20 series miniature motor with 100:1 gearing, has 150 RPM, torque is 0.3 kg*cm (0.029 Nm). The supply voltage is 6 volts.

PLN16.18
PLN16.18 tax excl.
Waiting time approx. 4-6 weeks
Waiting for delivery
30-day returns
PayPal payment
Manufacturer: N20 Motors

Product description: N20-BT41 micro 100:1 150 RPM motor - 6V

Small, lightweight yet powerful motors from the N20 series, compatible with Pololu's motors, are used by robot builders as drive units. The units can be powered by up to 9 V (depending on the model), and gain their useful power above 3 V. The optimum voltage, at which the ratio of power to strength is most favourable, is 6 V.

Silnik N20

Dimensions of the motor

The motor body is a cuboid measuring 24 x 10 x 12 mm. The gearbox is 9.27 mm long. There is a 3 mm D-shaped shaft at the output. Total mass is about 10 g.

The drawing shows the dimensions of the micro motor with gearbox.

Technical specification of the motor

Supply voltage:

6 V

No-load current (6 V):

30 mA

No-load speed (6 V):

150 rpm

Torque (6 V):

0.3 kg*cm (0.029 Nm)

Ratio:

100:1

Shaft diameter:

3 mm

Body dimensions:

24 x 10 x 12 mm

Weight:

10 g

Double-sided shaft:

NO

Accessories compatible with the N20 series

N20 motors are compatible with Pololu motor accessories.

  • Mounts: Special mounts in white or black have been designed for mounting the motors. An extended version and one made of high-strength aluminium are also available.

Silnik N20


Silnik N20

Silnik N20

Attention!

N20 motors are not compatible with Pololu micro motor encoders.

Diameter 12 mm
Length 24 mm
Voltage to 1.0 V
Voltage from 6.0 V
Motor - current 250 mA
Motor - gear 100:1
Rotation speed 150 obr/min
Torque 0,3 kg*cm
Mass 10 g
Motor - shaft 3 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Adapter plug DC 5.5 / 2.1 - plug connector 6F22 battery 9V

Adapter that allows you to connect a popular 9 V 6F22 battery for DC 5.5/2.1 mm connectors used in development sets, for example, Arduino.
Index: AKC-01369
Index: AKC-01369
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN1.54 Price PLN1.54

L293D Motor Driver Board - 2-channel motor driver 16V/0.6 A - Shield for Arduino - Iduino ST1138

The module allows you to control four DC motors (DC) or two stepper motors using Arduino kits. The system allows to adjust the direction and speed of rotation of the motors...
Index: MOD-08224
Index: MOD-08224
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN18.62 Price PLN18.62

Panasonic 6F22 9V battery

Panasonic 6F22 battery with 9 V nominal voltage.
Index: BAT-03864
Index: BAT-03864
Available, 24h shipping!
(Check quantity)
Regular price PLN3.01 Price PLN3.01

Neodymium magnets 6x3mm - 5pcs

Neodymium round magnet with dimensions of 6 x 3 mm Neodymium magnets have a very large attractive force due to the very high energy density. They have a lifetime warranty for...
Index: MAG-06504
Index: MAG-06504
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN3.58 Price PLN3.58

Microswitch bi-stable ON-ON 7x7mm - 5 pcs

Micro-switch 2-s tate  to print. Size: 7 x 7 mm, height: 12.5 mm. 5 pcs
Index: UCC-01416
Index: UCC-01416
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN2.03 Price PLN2.03

18650 Li-Ion Sony US18650VTC4 2100mAh

Sony li-ion 18650 rechargeable battery. Nominal voltage: 3,7 V. Capacity 2100 mAh.
Index: AKU-06459
Index: AKU-06459
Available, 24h shipping!
(Check quantity)
Regular price PLN21.14 Price PLN21.14

L293D - two-channel 36V / 0,6A motor driver - 5pcs

Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...
Index: UCC-00176
Index: UCC-00176
Available, 24h shipping!
(Check quantity)
Regular price PLN7.24 Price PLN7.24

TCST1103 photoelectric sensor - optocoupler

Slit width: 3 mm. Maximum voltage - 70 Volts .
Index: UCC-00372
Index: UCC-00372
Czas oczekiwania: ok. 10-30 dni
Regular price PLN3.17 Price PLN3.17

THT CF carbon resistor 1/4W 1,0kΩ - 30pcs

A set of 30 resistors with the 1/4 W power. Elements are in the through hole THT case.
Index: PAS-03965
Index: PAS-03965
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN1.54 Price PLN1.54

Li-Pol Dualsky 1800mAh 25C 11.1V Pack

Dualsky high-performance lithium-polymer battery. Discharge current: continuous 25 C (45 A), weight 145 g, dimensions 90 x 34 x 23 mm .
Index: NAS-12885
Index: NAS-12885
Available, 24 hours shipping!
(Check quantity)
Regular price PLN70.73 Price PLN70.73

Li-Pol Dualsky 800mAh 25C 3S 11,1V ECO-S package

A powerful Dualsky lithium-polymer battery. Discharge current: continuous 25 C (20 A). Dimensions 66 x 26 x 20 mm. Weight: 61,5 g.
Index: AKU-02394
Index: AKU-02394
Available, 24h shipping!
(Check quantity)
Regular price PLN28.46 Price PLN28.46

Micro motor N20-BT43 210:1 100RPM - 6V

The miniature motor of N20 series with 210:1 gearing, has 100 rpm, torque is 2.6 kg*cm (0.255 Nm). The supply voltage is 6 volts.
Index: DNG-12605
Index: DNG-12605
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Products from the same category

Micro motor N20-BT09 298:1 100RPM - 12V

The N20 series miniature motor with 298:1 gearing, has 100 RPM, torque is 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12548
Index: DNG-12548
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT05 50:1 625RPM - 12V

N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is 1.1 kg*cm (0.108 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12545
Index: DNG-12545
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT07 100:1 320RPM - 12V

The N20 series miniature motor with 100:1 gearing, has 320 RPM , torque is 2.2 kg*cm (0.216 Nm). The supply voltage is from 3 V to 12 V.
Index: DNG-12547
Index: DNG-12547
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT01 75:1 220RPM - 6V

N20 series miniature motor with 75:1 gearing, has 220 RPM , torque is 0.8 kg*cm (0.078 Nm). The supply voltage is from 1 V to 6 V.
Index: DNG-12541
Index: DNG-12541
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT24 50:1 625RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is equal to 1.1 kg*cm (0.107 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12566
Index: DNG-12566
Available, 24 hours shipping!
(Check quantity)
Regular price PLN15.45 Price PLN15.45

Micro motor N20-BT43 210:1 100RPM - 6V

The miniature motor of N20 series with 210:1 gearing, has 100 rpm, torque is 2.6 kg*cm (0.255 Nm). The supply voltage is 6 volts.
Index: DNG-12605
Index: DNG-12605
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT39 1000:1 14RPM - 9V

The N20 series miniature motor with 1000:1 gearing, has 14 RPM, torque is equal to 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12600
Index: DNG-12600
Available, 24 hours shipping!
(Check quantity)
Regular price PLN26.83 Price PLN26.83

Micro motor N20-BT34 298:1 45RPM - 9V

The miniature motor in the N20 series with 298:1 gearing, has 45 RPM , and the torque is 2.9 kg*cm (0.284 Nm) . The supply voltage ranges from 3 V to 9 V.
Index: DNG-12593
Index: DNG-12593
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT44 250:1 90RPM - 6V

The N20 series miniature motor with 250:1 gearing, has 90 RPM, torque is equal to 3 kg*cm (0.294 Nm). The supply voltage is 6 volts.
Index: DNG-12606
Index: DNG-12606
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT35 150:1 200RPM - 9V

The N20 series miniature motor with 150:1 gearing, has 200 RPM , torque is 2.9 kg*cm (0.284 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12594
Index: DNG-12594
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT17 50:1 250RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 250 RPM, torque is 0.5 kg*cm (0.049 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12556
Index: DNG-12556
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT39 1000:1 32RPM - 9V

The N20 series miniature motor with 1000:1 gearing, has 32 RPM, torque is equal to 9 kg*cm (0.883 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12601
Index: DNG-12601
Available, 24 hours shipping!
(Check quantity)
Regular price PLN26.83 Price PLN26.83