NanoPi NEO Core Allwinner H3 Quad-Core 1.2Ghz + 512MB RAM + 8GB eMMC

Index: NNP-10759 EAN: 5904422383404

Minicomputer NanoPi, version Core with processor Allwinner quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. Board has a 512 MB of DDR3 RAM and 8 GB of memory eMMC, Ethernet Gigabit port on pins of 2.54 mm and microUSB slot + 3 x USB Host on pins of 2.54 mm, 68 GPIOs and a slot for microSD cards. It works with the uboot, Ambian, DietPi, Lakka, Kali, OpenWrt.

NanoPi NEO Core Allwinner H3 Quad-Core 1.2Ghz + 512MB RAM + 8GB eMMC
€47.50
€38.62 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: FriendlyARM

Description

MinicomputerNanoPi, version Corewith processor Allwinner quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. Board has a512 MB of DDR3 RAMand8 GB of memory eMMC,Ethernet Gigabitport on pins of 2.54 mm andmicroUSB slot+3 x USB Hoston pins of 2.54 mm,68 GPIOsand a slot for microSDcards. It works with theuboot, Ambian, DietPi, Lakka, Kali, OpenWrt, etc.

 

Operating system

NanoPi works with Debian system. The drive of the device may be the microSD card which can be purchased in our store.

 

Operating systems can be downloaded from the manufacturer's website.

The manufacturer also provides the guidance for the installation of the system.

Communication

The user has at his or her disposal:

  • GPIO x 68 pin - outputs/inputs of general purpose that can be used to control the LEDs, buttons, drivers of motors. Among them are the pins that support interfaces: I2C, SPI and UART.
  • a slot for microSD - slot for microSD memory cards, on which can be installed the operating system.

Food

As a power source, the system uses the microUSB connector. The manufacturer recommends that the voltage indicated on the plug had a value of 5.0 V and a current of the used adapter shall not be less than 2.0 A. In our offer, you will find power supplies that meet these parameters, for example: power supply Extreme 3.1 A.

Starter set

The manufacturer has prepared a set of sensors and modules in a convenient chest that simplifies getting started with minicomputer.

Matrix Starter Kit - zestaw startowy dla NanoPi i Raspberry PiThe contents of the set Matrix Starter Kit - sold separately.

Specification

Model NanoPi Core
Specification
Processor Allwinner H3
The core

Quad-Core ARM Cortex A7

Systems

uboot, Ambian, DietPi, Lakka, Kali, OpenWrt, etc.

Clock frequency 1.2 GHz
RAM

512MB of DDR3, 32-bit

Memory

8 GB of eMMC

microSD card

Slot for GPIO

68 pins of GPIO

Power

5 V / 2 A - microUSB

Board sizes 40 x 40 mm
Interfaces
USB-Host

3 x USB 2.0 on pins of 2.54 mm

Network interface Gigabit Ethernet on pins of 2.54 mm
Video -
Audio

I/O port (4-pin, contained on pins of 2.54 mm)

Camera

-

LCD -
Communication

UART, SPI, I2C, GPIO

The debugger

The serial port on pins of 2.54 mm

Other

status LEDs

Included

2x goldpin 24-pin strip / 2.54 mm

1x goldpin 20-pin strip / 2.54 mm

 

UC - Microcontroller Allwinner H3
UC - Core Cortex A7
UC - RAM 512 MB
UC - core 4. Quad Core
UC - Digital pins 68
UC - External memory eMMC 8 GB
UC - freq 1.2 GHz
UC - Ethernet yes
UC - HDMI no
UC - I2C yes
UC - UART yes
UC - Connector 5V microUSB
UC - SPI interface yes
UC - LCD interface no
UC - Camera interface no
UC - Linux yes
UC - Android no
UC - Windows no
Package width 7.5 cm
Package height 3 cm
Package depth 11 cm
Package weight 0.034 kg

Be the first to ask a question about this product!

Product reviews

NanoPi NEO Core Allwinner H3 Quad-Core 1.2Ghz + 512MB RAM + 8GB eMMC

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Tadeusz 16.09.2022 Confirmed purchase Translated review
exactly what I needed, excellent quality and price / performance ratio !!!

Customers who bought this product also bought:

Products from the same category: