• EOL

Complete Starter Kit with NanoPi NEO 256MB

Index: NNP-15206 EAN: 5904422323486

Starting set for NanoPi NEO minicomputer, included: NanoPi Neo 256 MB of RAM, NanoHat OLED cap and aluminum casing. In addition, the kit includes a memory card and necessary mounting elements.

Complete Starter Kit with NanoPi NEO 256MB
€55.50
€45.12 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: FriendlyARM

Attention!

The product has been discontinued. Check other products in category.

Product description: Complete Starter Kit with NanoPi NEO 256 MB

Starting setforNanoPi NEOminicomputer, included: NanoPi Neo 256 MB of RAM, NanoHat OLED cap and aluminum casing. In addition, the kit includes a memory card and necessary mounting elements.

Zestaw Complete Starter KitComplete Starter Kit with NanoPi Neo 256 MB RAM.
L.p. Photo Name
1 NanoPi NEO 256 MB- miniature NanoPi computer in Neo 1.3 version with 1.2 GHz Allwinner H3 quad-core ARM Cortex-A7 processor. The board has 512 MB of DDR3 RAM, built-inEthernetport and USB + 2 x USB Host slot on 2.54 mm pins, 36 GPIO, microSD card slot. Works with u-boot and UbuntuCore systems.
2 Aluminium housing - silver housing with brown buttons 44 x 47 x 33 mm. The housing also functions as a heat sink.
3

A16 GB class 10microSD memory cardwith Linux Ubuntu 16.04 installed.
4

NanoHat OLED - overlay for Nano Pi with 0.96" OLED display, resolution 128 x 64.

NanoPi Neo v1.4

The advantage of the tile is its small dimensions, the tile outline is 40 x 40 mm.

NanoPi Neo

Miniature computerNanoPiwhen it comes toNeo v1.4with processorAllwinner H3 quad-coreARM Cortex-A7 1.2 GHz. The plate has256 MBmemoriesFRAME DDR3, built-in portEthernetandUSB port + 2x USB Host on pins2.54 mm,36 GPIO...microSD card slot. Works with manufacturer's systemsu-boot and UbuntuCore.Version v1.4 has 4-pin audio interface, 2-pin CVBS interface, supports IC power control and has holes for heatsink mounting.

Operating system for NanoPi Neo

NanoPi works with systems prepared by the manufacturer: u-boot and UbuntuCore. The disk of the device can be a microSD card, which is included in the kit.

Operating systems can be downloaded fromthe manufacturer's website.

The manufacturer also provides asystem installation guide.

NanoPi Neo power supply

The system uses themicroUSBconnector as the power source. The manufacturer recommends that the voltage given on the connector should be 5.0 V, while the current capacity of the power supply used should be at least 2.0 A. In our offer you will findpower supplies meeting these parameters.

The device has a USB port, connector and Ethernet port and many others.

Specification

Model NanoPi Neo
Specification
Processor Allwinner H3
Core Quad-Core ARM Cortex A7
Systems u-boot
UbuntuCore
Clocking 1.2 GHz
Memory RAM 256 MB
Memory microSD card
GPIO socket 36-pin connector
Power supply 5 V / 2 A - microUSB
Dimensions of the tiles 40 x 40 mm
Interfaces
USB Host 1 x USB socket A
2 x USB Host on 2.54 mm pins
Network interface Ethernet 10/100 Mbps
Video -
Audio audio output and microphone
on GPIO connector
Communication UART, SPI, I2C, GPIO, PWM
Debugger Serial port 4pin / 2.54 mm
Additional Built-in LED
CVBS 2-pin interface
Supports IC power control
Heatsink mounting holes
UC - Microcontroller Allwinner H3
UC - Core Cortex A7
UC - RAM 256 MB
UC - core 4. Quad Core
UC - Digital pins 30
UC - External memory microSD card
UC - freq 1.2 GHz
UC - Ethernet yes
UC - USB microUSB
UC - microSD yes
UC - HDMI no
UC - I2C yes
UC - UART yes
UC - Connector 5V microUSB
UC - SPI interface yes
UC - LCD interface no
UC - Camera interface no
UC - Linux yes
UC - Android no
UC - Windows no
Package width 13.5 cm
Package height 11.3 cm
Package depth 4.7 cm
Package weight 0.159 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: