Product description: NanoPi NEO3-LTS - RK3328 Quad-Core 1.3 GHz + 2 GB RAM
NanoPi Neo 3 small computer based on the RockChip RK3328 processor with ARM Cortex-A53 core clocked at 1.29 GHz. It is equipped with 2 GB of DDR4 RAM, a Gigabit Ethernet port with a unique MAC address, a USB 3.0 slot, a USB Type-C power socket, a microSD card slot and 26 GPIOs. The module runs the Friendly Wrt / Ubuntu operating system.
NanoPi Neo3.
NanoPi Neo3 - pinouts.What you need to run NanoPi Neo3?
- MicroSD memory card - the medium on which the operating system will be installed.
- AC adapter with microUSB plug - 5V with 1A current capacity with USB type C connector.
Operating system for NanoPi
NanoPi works with systems prepared by the manufacturer: Friendly Wrt and Ubuntu. The disk of the device can be a microSD card.
The operating systems can be downloaded from the manufacturer's website. The manufacturer also provides a guide how to install the system.
Communication of NanoPi Neo3 minicomputer
The device has been equipped with standard communication interfaces that can be found in standard PC-class computers.
- 1x USB 3.0 type A + 2 USB 2.0 ports on 2.54 mm pins, where you can connect WiFi adapter, mouse or keyboard. The number of connectors can be increased by using the USB hub.
- 1x Ethernet 1 Gb/s socket for wired LAN connection.
- GPIO x 26 pins - general purpose inputs / outputs, which can be used to operate LEDs, buttons, motor drivers. These include such interfaces as I2C, I2S, SPI and UART.
- MicroSD card slot - a slot for a microSD card which is a carrier for the operating system.
| Comparison of NanoPi Neo2 and NanoPi Neo3 | ||
|---|---|---|
 |
 |
|
| Model | NanoPi Neo2 | NanoPi Neo3 |
| Processor | Allwinner H5 | RockChip RK3328 |
| Architecture | Cortex A53 | Cortex A53 |
| Clocking | 400 MHz to 1.2 GHz | 400 MHz to 1.296 GHz |
| Core voltage | 1.1 V / 1.3 V, two-step voltage adjustment | 0.96 V to 1.3 V, 6-level dynamic scaling and voltage adjustment |
| Number of cores | 4 | 4 |
| Memory bus | DDR3 16-bit | DDR4 32-bit |
| RAM Frequency | 504 MHz | 786 MHz to 1056 MHz, dynamic scaling |
| Ethernet | 10/100/1000 Mb/s, software generated MAC address | 10/100/1000 Mb/s, unique MAC address |
| USB | USB 2.0 | USB 3.0 |
| Fan connector | - | yes |
| Power connector | microUSB | USB type C |
| Key | - | User Key |
| Uboot | U-boot-2017.11 | U-boot-2014.10 |
| Kernel | 4.14 | 5.4 |
| OS | FriendlyWrt / Ubuntu core 16.4 | FriendlyWrt / Ubuntu core 18.04 |
| Dimensions | 40 x 40 mm | 48 x 48 mm |
NanoPi Neo3 Minicomputer.NanoPi Neo3 specification
- CPU: RockChip RK338 ARM Cortex A53 Quad-Core 1.3 GHz
- RAM: 2 GB DDR4
- MicroSD slot
- Ethernet: 10/100/1000 Mbps with unique MAC
- USB:
- 1x USB 3.0
- 2x USB Host on 2.54 mm pin
- USB Type C for power
- Pin Connector: 26-pin GPIO 2.54mm I2C, I2S, SPI, UART
- LED:
- PWR LED (red)
- STAT LED (green)
- Button: 1x
- Operating temperature: from -20°C to 70°C
- Power supply: 5 V / 1 A USB C
- PCB: 6 layers
- Dimensions: 48 x 48 mm
- Weight: 22 g
Useful links |
