• EOL

MW-D7B wall RFID reader - 125kHz - black

Index: NEX-17614 EAN: 5904422328061

Wall mounted RFID card and transponder reader compatible with Unique, HITAG, Q5 and HID standards. The device uses 125 kHz frequency for operation. It supports four communication interfaces: RS232, RS485, 1-Wire and WIEGAND. MW-D7 has a capacitive touch button, built-in buzzer, antenna and LED. The reader has two inputs and one output for any purpose. Product in black colour version.

MW-D7B wall RFID reader - 125kHz - black
€29.50
€23.98 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Netronix

Attention!

The product has been discontinued. Check other products in category.

Product description: RFID wall-mounted reader MW-D7B - 125 kHz - black.

Wall mountedRFIDcard and transponder readercompatible withUnique, HITAG, Q5 and HID standards. The device uses125 kHzfrequency for operation. It supports four communication interfaces: RS232, RS485, 1-Wire and WIEGAND. MW-D7 has a capacitive touch button, built-in buzzer, antenna and LED. The reader has two inputs and one output for any purpose. Product in black colour version.

Czytnik naścienny RFID MW-D7B - 125kHz - czarny

MW-D7B - 125kHz RFID wall-mounted reader - black.

Output description

The reader haseight leadsin the form ofwireswith removed insulation, placed on the back of the casing. Below is a description of individual connections.

Description of reader's outputs MW-D7
The colour of the cable Name Function
Red VCC Power supply
Blue GND Mass
White Anticolliosis Bringing readers working closely together
Brown PinOUT Any destination
Green PinTERFACE1 Serial interface line: RS232_TX, RS485_B, WIEGAND0, 1WIRE
Yellow PinTERFACE2 Serial interface line:RS232_RX, RS485_A, WIEGAND1
Grey PinIN0 Entry for any purpose
Pink PinIN1 Entry for any purpose

Functions available for different types of cards and transponders.

Support for functionalities depending on transponder type
Transponder type Reading the ID number Full memory block writing and reading Writing and reading using encryption
Unique Yes No No
Q5 Yes Yes No
HID Yes No No
HITAG Yes Yes Yes

RFID reader specification MW-D7

  • Supply voltage: 7 V to 15 V
  • Rated RF frequency: 125 kHz
  • Supported standards: Unique, HITAG, Q5, HID
  • Supported communication interfaces: RS232, RS485, 1-Wire, WIEGAND
  • Number of GPIO pins: 3
  • Card and transponder reading distance: up to 8 cm
  • Leakage class: IP54
  • Front button type: capacitive
  • Built-in buzzer, antenna, RGB LED
  • Colour: black
  • Dimensions: 83 x 44 x 14 mm

Set contents

  • Reader MW-D7
  • Mounting accessories: screws and studs

Frequency from 125 kHz
Frequency to 125 kHz
Package width 8 cm
Package height 3.5 cm
Package depth 12 cm
Package weight 0.069 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: