• EOL

MW-R7B wall RFID reader - 13,56MHz - black

Index: NEX-17664 EAN: 5904422346263
The RFIDcard and transponderreader designed for wall mounting. It operates at a frequency of 13.56 MHz. It is compatible with the following standards: MIFARE Classis, MIFARE Plus, MIFARE Ultralight C, MIFARE DESFire, ICODE SLI and iClass. The reader has 3 GPIO pins. It is also equipped with a touch button and built-in signaling LED. Housing version in black.
MW-R7B wall RFID reader - 13,56MHz - black
€43.50
€35.37 tax excl.
Unavailable
Discontinued product
PayPal payment
Netronix 13.56MHz RFID wall reader - color:
Manufacturer: Netronix

Attention!

The product has been discontinued. Check other products in category.

Product description: Wall mount RFID reader MW-R7B - 13.56 MHz - black

TheRFIDcardandtransponder reader designed forwallmount applications. Operates at frequency of 13.56 MHz. It is compatible with the following standards: MIFARE Classis, MIFARE Plus, MIFARE Ultralight C, MIFARE DESFire, ICODE SLI and iClass. The reader has 3 GPIO pins. It is also equipped with a touch button and built-in signaling LED. The housing version isblack.

Czytnik RFID MW-R7B - 13,56 MHz - czarny

RFID reader MW-R7B - 13,56 MHz - black.

Zawartość zestawu

The set includes assembly studs.

The specification of RFID reader MW-R7

  • Supply voltage: from 8 V to 15 V
  • Maximum supply current 120 mA
  • Average current consumption: 25 mA
  • Rated RF Frequency: 13.56 MHz
  • Supported standards: MIFARE Classis, MIFARE Plus, MIFARE Ultralight C, MIFARE DESFire, ICODE SLI, iClass
  • Supported communication interfaces: RS232, RS485, 1-Wire, WIEGAND and CAN 2.0B
  • Operation with Netronix and MODBUS-RTU protocol in RS232/RS485 interface mode
  • Number of GPIO pins: 3
  • Card and transponder reading distance: up to 8 cm
  • Degree of protection: IP54
  • Front button type: capacitive
  • Built-in buzzer, antenna, RGB LED
  • Dimensions: 83 x 44 x 14 mm

Leads description

Reader has eight pins in form of wires with stripped insulation, placed on back side of casing. Below you can find description of each connection.

Leads description of MW-R7B reader
Cable color Name Function
Red VCC Power supply
Blue GND GND
White Anti-collision Lead for connecting readers working close to each other
Brown PinOUT Any purpose output
Green PinINTERFACE1 Serial interface line: RS232_TX, RS485_B, CAN_H, WIEGAND0, 1WIRE
Yellow PinINTERFACE2 Serial interface line: RS232_RX, RS485_A, CAN_L, WIEGAND1
Gray PinIN0 Any purpose input
Pink Pink PinIN1 Any purpose input
Frequency from 13.56 MHz
Frequency to 13.56 MHz
Package width 8 cm
Package height 12.5 cm
Package depth 3 cm
Package weight 0.07 kg

Be the first to ask a question about this product!

Product reviews

MW-R7B wall RFID reader - 13,56MHz - black

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Wojciech B. 21.02.2022 Confirmed purchase Translated review
The product completely meets my expectations.

Customers who bought this product also bought:

Products from the same category: