• EOL

ODYSSEY – STM32MP157C with SoM - Raspberry Pi 40-Pin Compatible - Seeedstudio 102110319

Index: SEE-16547 EAN: 5904422326142

The STM32MP157COdyssey is a single-platform computer based on the STM32MP157C module . The minicomputer is equipped with a dual-core ARM Cortex A7processor supported by a Cortex-M4coprocessor. The product is compatible with a 40 pin GPIO connector with Raspberry Pi. The product consists of two elements of a SoM STM32MP157C board, on which the most important moduleis placed and boards with connectors and additional modules.

ODYSSEY – STM32MP157C with SoM - Raspberry Pi 40-Pin Compatible - Seeedstudio 102110319
€70.50
€57.32 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Seeedstudio
Compatibility: Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Product description: OdysseySTM32MP157Cwith SoM - compatible with 40-pin Raspberry Pi connector - Seeedstudio 102110319.

The STM32MP157COdysseyis a single-platform computer based on the STM32MP157C module.The minicomputer is equipped with a dual-core ARM CortexA7processor integrated with Cortex-M4. The product is compatible with a40 pinGPIOconnector with Raspberry Pi. The product consists of two elements of a SoM STM32MP157C board, on which the most important module is placed, and a carrier board with connectors and additional modules, which allow for seamless connection of peripheral devices. It is also possible to switch the SoM to its own carrier board.

Presentation of the OdysseySTM32MP157Csingle board computer.

The most important features of a minicomputer

  • ARM Cortex A7dual core processor integrated withCortex M4
  • Placing the most important modules on SoM
  • Compatible withGPIO40-pin connectors known from Rapsberry Pi
  • Customizable to your needs thanks to opensource SDK/API/BSP/OS

Schemat pinów GPIO

Arrangement of GPIO pins on the backing plate.

What do I need to run the Odyssey STM32MP157C?

  • A microSD memory card- the operating system will be installed from this media (min. 4 GB)
  • Power supply: DC Jack 12 V / 2 A or USB type C 5 V / 3 A
  • PC to store a memory card with the system
  • Connected internet - for software download
  • SD card reader with microSD USB adapter
Widok na płytkę od góry

Odyssey STM32MP157C.

Single disc computer operating system

Just like in Raspberry Pi, here we also have to equip ourselves with amicroSDcard andbooththe installations of our chosen system on it. We can use amicroSDcard or built-ineMMCmemory to run it. A detailed description of the installation can be found on the wikidedicated to the product.

Widok od dołu płytki

The microSD card slot is located on the back of the board.

Communication in the minicomputer Odyssey STM32MP157C

The minicoputer is equipped with basic communication interfaces that can be found in PCs. The user has it at his disposal:

  • three USB connectors (2xUSB A, 1x USB C) - the USB A ports allow you to connect additional peripheral devices, as in a regular PC, the USB C connector is designed to power the device and communicate with the PC.
  • Ethernet socket and WiFi module -allow you to connect our minicomputer to the network using a cable with RJ-45 plug or wirelessly.
  • GPIO 40-pin -RaspberryPicompatible connectors.They can be used to connect different sensors, diodes or whole overlays. They include such interfaces as: I2C, SPI, UART.
  • microSD slot - the slotis designed for media with a system from which we install our operating system
Płytka Odyssey

Plate with SoM connected.

Power supply Odyssey STM32MP157C

The STM32MP157C odyssey can be powered by a12-voltpower supply with a current capacity of2 Aor by using the USB C port, in this case the voltage should be5V and the current capacity is 3 A. Both the power supply and the USB C cable should be purchased separately, preferably a 4-core cable when purchasing the USB cable.

Porty USB A oraz DC

DC Jack port with Ethernet and USB port.

Technical Specification Odyssey STM32MP157C

SoM specification

MPU:

STM32MP157C

  • dual core ARM Cortex A7 32-bit
  • ARM Cortex-M4 with FPU/MPU 32-bit
PMU: ST PMIC STPMIC1A
RAM: 512 MB DDR3
Flash memory: 4 GB EMMC
Connectors: 3 x 70-pin board to board connectors
Size of the SoM module: 38 mm x 38 mm
Specifications of the backing plate
Connectors:
  • 2x USB port A
  • 1x Gigabit Ethernet connector
  • 1x 3.5 mm audio jack connector
  • 1x DSI MIPI connector to connect the display
  • 1x DVP connector for camera connection
  • 2x Grove connector (GPIO and I2C)
  • 1x SD card slot
  • 1x DC Jack socket
  • 1x USB C
  • GPIO connector 40-pin raster2.54 mm
WiFi/BLE:
  • WiFi 802.11 b/g/n 2.4GHz
  • Bluetooth 4.1 with BLE
LEDs:
  • 1x Reset
  • 3x Programmable LED
  • 1x Power
Buttons:
  • 1x Reset
  • 1x Programmable buttons
  • 1x Power
Power supply:
  • DC Jack socket (from12 V to 24 V / 2 A, recommended supply is 12 V / 2 A)
  • USB C
Dimensions of the backing plate: 56 x 85 mm

Komputer jednopłytkowy

View of the board from the USB port C.

The set includes

  • 1x Odyssey- STM32MP157C
  • 4x mounting screws
  • 4x nuts

Voltage to 12.0 V
Voltage from 24.0 V
Current 2 A
UC - Microcontroller STM32MP157C
UC - Core Cortex A7
UC - Flash 4 GB eMMC
UC - RAM 512 MB
UC - core 2. Dual Core
UC - Digital pins 40
UC - External memory microSD card
UC - freq 650 MHz
UC - Ethernet yes
UC - WiFi yes
UC - USB 2x USB A + USB C
UC - microSD yes
UC - Bluetooth yes
UC - HDMI no
UC - I2C yes
UC - UART yes
UC - Connector USB typ C
UC - SPI interface yes
UC - LCD interface yes
UC - Camera interface yes
UC - Linux yes
UC - Android no
UC - Windows no
Package width 8 cm
Package height 2.5 cm
Package depth 12.5 cm
Package weight 0.075 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: