Description
Shield for Raspberry Pi and Jetson Nano with blue OLED display with a diagonal of 1.3" and a resolution of 128 x 64 px. The screen is based on SH1106 driver, it communicates via the I2C or SPI bus. Additionally, on board is a joystick and three buttons.
The subject of the sale is a shield with display, minicomputerRaspberry Pican be purchased separately.
Key features
- Standard connection via the GPIO connector of the Raspberry Pi 4 / 3+ / 3 / 2 / Zero / Zero W and Jetson Nano
- Additional interfaces: 4-SPI, 3-SPI, I2C
- The board consists of: 1x joystick (5-position), 3x buttons
Pins
The shield has an additional SPI and I2C interfaces, the board consists of three buttons and a joystick.
| Symbol | Pin Raspberry Pi | Description |
|---|---|---|
| KEY 1 | P21 | 1 button / GPIO. |
| KEY 2 | P20 | 2 button / GPIO. |
| KEY 3 | P16 | 3 button / GPIO. |
| Joystick Up | P6 | Joystick up. |
| Joystick Down | P19 | Joystick down. |
| Joystick Left | P5 | Joystick left. |
| Joystick Right | P26 | Joystick right. |
| Joystick Press | P13 | Joystick button. |
| SCLK | P11 / SCLK | The clock line of SPI. |
| MOSI | P10 / MOSI | Data line of SPI. |
| DC | P24 | Selection of data / commands (high for data, low for commands). |
| CS | P8 / CE0 | Selection of Chip,activated by low state. |
| RST | P25 | The reset system is activated by the low state. |
Specification
- Driver: SH1106 (documentation)
- Interface: 4-SPI, 3-SPI, I2C
- Display color: blue
- Resolution: 128 x 64 px
- Supply voltage: 3.3 V
- Dimensions: 65 x 30,2 mm
Useful links |
