Display OLED blue graphic 1.3'' (B) 128x64px SPI/I2C - straight connectors - Waveshare 10451

Index: WSR-04441 EAN: 5904422371968

OLED blue display with a diagonal of 1.3" and a resolution of 128 x 64 px. The screen is based on SH1106 driver, works with voltages of 3.3 V and 5 V, communication via SPI or I2C. It has soldered straight goldpin connectors.

Display OLED blue graphic 1.3'' (B) 128x64px SPI/I2C - straight connectors - Waveshare 10451
€7.50
€6.10 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Waveshare
Compatibility: Arduino

Description

OLED blue display with a diagonal of 1.3" and a resolution of 128 x 64 px. The screen is based on SH1106 driver, works with voltages of 3.3 V and 5 V, communication via SPI or I2C.

 

This version has soldered straight goldpin connectors. In our offer you will also findthe display with angled connectors.

 

The manufacturer provides auser manualandlibrary to support the screen.

 

Connection

The module has soldered angled goldpin connectors - raster 2.54 mm, communicates via SPI or I2C. Description of the specific pins is shown in the table.

 

Pin Symbol Description
1 VCC Supply voltage from 3.3 V to 5.0 V.
2 GND The ground of the system.
3 NC Should be left unconnected.
4 DIN Data line of SPI interface.
5 CLK Clock line of the SPI interface.
6 CS Select the device SPI bus is activated by low state.
7 D/C

Select operating mode - low means the transmission of commands,

high means transmission of data.

8 RES Reset system is activated by the low state.

 

Setting

The bus selection is carried out with jumpers BS0 and BS1, which are on the back of the board. By default the display is in 4-wire SPI mode. For details, see the table below.

 

Mode

work

Pin

BS0

Pin

BS1

Function

DIN

Function

CCS

3-wire SPI 1 0 MOSI SCLK
4-wire SPI 0 0
I2C 0 1 SDA SC

Jumper for selection of operation mode is located in the centre of the module: BS1 and BS0.

 

The product is compatible with Arduino

Online you can findlibrariesfor users ofArduino.

 

Specification

  • Working voltage: from 3.3 V to 5.0 V
  • Driver: SH1106 (documentation)
  • Communication: SPI / I2C
  • Mode selection using jumper BS0 and BS1
  • Display type: OLED
  • Diagonal: 1,3"
  • Resolution: 128 x 64 px
  • Color: blue
  • The viewing angle of above 160 °
  • Operating temperature: -20 °C to 70 °C
  • Soldered goldpin connectors - 2.54 mm raster
  • Dimensions: 40.5 x 37.5 mm

 

Screen - type OLED
Screen - diagonal 1.3''
Screen - interface SPI+I2C
Screen - touch no
Screen - resolution 128x64px
Test 4
Package width 8 cm
Package height 1.8 cm
Package depth 8 cm
Package weight 0.009 kg

Be the first to ask a question about this product!

Product reviews

Display OLED blue graphic 1.3'' (B) 128x64px SPI/I2C - straight connectors - Waveshare 10451

4.8/5

Average grade

4

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: