Filament Fiberlogy FiberSilk 1,75mm 0,85kg - Anthracite

Index: FLA-17253 EAN: 5902560995978

Waterproof FiberSilk filament in anthracite colour with a diameter of 1.75 mm. The material has a silky, metallic glow that brings out every detail of the model and all its bends and curves. FiberSilk is more durable than traditional PLA. It can be used in all FFF/FDM printers that do not have protection against filaments from other manufacturers.

Filament Fiberlogy FiberSilk 1,75mm 0,85kg - Anthracite
€33.90
€27.56 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Fiberlogy

Description: Fiberlogy FiberSilk 1,75mm 0,85kg - Anthracite

WaterproofFiberSilkfilament in anthracite colourwitha diameter of 1.75 mm. The material is characterized by a silky,metallic glowthat brings out every detail of the model and all its bends and curves, and is distinguished by its high strength, impact resistance and very good combination of layers during printing. FiberSilk ismore durable than traditional PLA.It can be used in allFFF/FDM printersthat do not have protection against filaments from other manufacturers.0.85 kg ofmaterial is wound on the spool.

Filaments

In our offer of filaments you will also find other materials and colors.

Filament Fiberlogy FiberSilk

Filament Fiberlogy FiberSilk 1.75 mm 0.85 kg - Anthracite.

When loading the file and during printing you can see swelling of the material, this is a normal effect with this type of material. This is due to the surface tension of the polymers included in the filament. For better effects, the manufacturer recommends setting high airflow during printing and lowering the printing speed.

Suggested parameters of printing with the filament

Printing temperature From 210°C to 230°C
Table temperature From 50°C to 70°C
Print speed From 35 to 60 mm/s

Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally.

Technical specifications and physical properties of the pillar

Parameter Scope
Diameter of pillar 1.75 mm
Dimensional tolerances of the philanthropy +/- 0,02 mm
Colour Anthracite (anthracite)
Printing temperature From 210°C to 230°C
Table temperature From 50°C to 70°C
Spool - material FiberSilk
Reel diameter 200 mm
Reel width 80 mm
Mounting hole diameter 52 mm
Moisture absorber Yes
Vacuum packing Yes
Roundness +/- 0.01 mm
Packaging dimensions 205 x 205 x 90 mm
Net weight 0.85 kg

Wykres właściwości filamentu.

The graph of the properties of the filament.

Colour anthracite
Filament - material FiberSilk Metallic
Filament - diameter 1.75 mm
Package width 21 cm
Package height 20.5 cm
Package depth 9 cm
Package weight 1.289 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: