- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Filament Fiberlogy PETG 1.75 mm 0.85 kg - Transparent Light Green
Fiberlogy's philanthropy,light green. The diameter of the material is 1.75 mm and the netweightis 0.85 kg. The presented product cooperates with3Dprintersworkingin FFF / FDM technology,whichhave no built-in protection against the use of materials produced by external suppliers.PETGThe cartridge has been hermetically packed in order to ensure the highest quality of the product.
In our offer of filaments you will also find other materials and colors.
Advantages of the PETG Transparent Light Green pillar
- High gloss of prints
- No unpleasant odours during printing
- Increased resistance to mechanical damage
- Increased resistance to salts, alkalis and acids
- Product requires a heated table
- Contains glycol, which minimizes shrinkage of the filament
- Thanks to its properties, the material can be used to create housings, mounting elements or jewellery.
In this video, we discuss the characteristics of the individual filaments.
Proposed print settings
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Cooling the printout | Recommended |
| The ground: | Masking tape |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the PETG Transparent Light Green pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Light green |
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Spool - material | PETG |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Charts of filament properties.
Useful links |
