• EOL

Filament Fiberlogy PETG 1,75mm 0,85kg - Silver

Index: FLA-17233 EAN: 5902560992663

A spool with a PETG filament in silver from Fiberlogy.Thenet weight of the insert is0.85kg and its thickness is1.75 mm.The filter can be used in 3D printers working in FFF/FDM technology, which do nothave blockagespreventing the use of third-party filters. PETG filters are characterized by greater resistance to physical and chemical damage.

Filament Fiberlogy PETG 1,75mm 0,85kg - Silver
€22.50
€18.29 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Fiberlogy

Attention!

The product has been discontinued. Check other products in category.

Description: Filament Fiberlogy PETG 1,75 mm 0,85 kg - Silver

A spool with Fiberlogy silverPETGfilament.The net weight of the insert is0.85 kgand its thickness is1.75 mm.The filter can be used in3Dprinters working in FFF/FDM technology, which do nothaveblockages preventing the use of third-party filters. PETG filters are characterized by greater resistance to physical and chemical damage. The cartridge has beenvacuumpacked.

Filaments

In our offer of filaments you will also find other materials and colors.

What distinguishes PETG filaments

The greatest advantage of PETG filaments is their strength. The filter has been enriched with glycol,which provides a smaller shrinkage of the filter and increases the resistance of the printout to possible scratches, abrasion and impact and the action of such chemicals as salts, acids or alkaline substances. PETG filters can be successfully used to create all kinds of handles, housings and accessories for everyday use.

From thisvideo you will find outhow different the different filters presented in the video are.

Suggested printing parameters using the filter

Printing temperature From 230°C to 250°C
Table temperature 90°C
Cooling the printout Recommended
The ground: Masking tape

Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally.

Specification of the PETG Fiberlogy filament

Parameter Scope
Diameter of pillar 1.75 mm
Dimensional tolerances of the philanthropy +/- 0,02 mm
Colour Silver
Printing temperature From 230°C to 250°C
Table temperature 90°C
Spool - material PETG
Reel diameter 200 mm
Reel width 80 mm
Mounting hole diameter 52 mm
Moisture absorber Yes
Vacuum packing Yes
Roundness +/- 0.01 mm
Packaging dimensions 205 x 205 x 90 mm
Net weight 0.85 kg

Wykres właściwości PETG.

Charts of PETG filament properties.

Colour silver
Mass 850 g
Filament - material PETG
Filament - diameter 1.75 mm
Package width 20.5 cm
Package height 8.5 cm
Package depth 20.5 cm
Package weight 1.297 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: