Product description: Filament Prusa PETG 1.75 mm 1 kg - Jungle Green
PETG filament manufactured by the Prusa company. A characteristic feature of 3D models obtained from the company's filament is increased flexibility and a high level of detail finishing. Green print material with a diameter of 1.75 mm . The weight of the product wound on the spool is 1 kg. The recommended maximum drying temperature for Prusament PETG is 60 ° C for a minimum of 4 hours.
The use of the Prusa PETG filament
PETG is a strong material characterized by high temperature resistance. It is universally applicable, but it is especially suitable for models of mechanical parts, intended for use both inside and outside buildings. The filament has a low temperature expansion , which reduces problems with curling up layers. Thus, even large models can be created without the need for a closed working chamber. The glycol content ensures greater ease of printing, while maintaining high flexibility and increased resistance to cracking under mechanical pressure. PETG is used in the production of Prusa 3D printers .
High quality of the Prusa brand
Prusa filaments are manufactured to the highest standards. The entire process of creating printing material is strictly controlled . The products are subjected to numerous tests aimed at ensuring the highest quality of the product. Standard tolerance for the dimension of the filament diameter of other manufacturers is usually ± 0.05 mm. In the case of Prussia, this value is only ± 0.02 mm . High color uniformity is also of great importance.
Features of the Prusa PETG filament
- High temperature resistance
- Ease of printing
- Low shrinkage
- Increased durability and strength
- Simple to process
- It is not intended for printing small details
- It has poor "bridging" characteristics. bridging
- It tends to thread (this phenomenon is eliminated by the default settings in the Prusa Slicer or with hot air, e.g. from a dryer)
Filament Prusa PETG 1.75 mm 1 kg - Jungle Green .
Suggested filament printing parameters
| Head temperature | 200 ° C to 220 ° C |
| Table temperature | From 70 ° C to 90 ° C |
| Cooling the print | Recommended |
Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the Prusa filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.02 mm |
| Use | FDM / FFF 3D printing |
| Chemical name of the filament | poly (ethylene terephthalate) copolymer |
| Print speed | Up to 200 mm / s |
| Color | Jungle Green (green) |
| Spool - material | PETG |
| Spool diameter | 200 mm |
| Spool width | 70 mm |
| Mounting hole diameter | 52 mm |
| Net product weight | 1 kg |
Useful links |
