3pi+ Standard Edition Kit - set for build robot with 32U4 controller and 30:1 HPCB motors - Pololu 3740

Index: PLL-19108 EAN: 5904422363970
DIY kit for Pololu 3pi+ robot in Standard Edition version. It is equipped with DC HPCB micro motors with 30:1 gearing together with encoders and ATmega32U4 based controller. The 3pi robot is equipped with 9DoF sensors, IR reflective sensors for line tracking, collision sensors (located on the bumper), LCD display, buzzer and power switch. Two motors with encoders along with two wheels with silicone tires and a support ball allow the robot to move.
3pi+ Standard Edition Kit - set for build robot with 32U4 controller and 30:1 HPCB motors -...
€201.50
€163.82 tax excl.
Waiting time: 4-6 weeks
Only on request
PayPal payment
3pi+ robot building kit - version:
Manufacturer: Pololu

Product Description: 3pi+ Standard Edition Kit - robot build kit with 32U4 controller and HPCB 30:1 motors - Pololu 3740

Pololu 3pi+Standard Editionrobot build kit. It is equipped with 30:1DC HPCB micro motorswith encoders andATmega32U4basedcontroller. The 3pi robot is equipped with 9DoF sensors, IR reflective sensors for line tracking, collision sensors (located on the bumper),LCD display, buzzer and power switch. Two motors withencodersalong with two wheels with silicon tires and a support ball allow the robot to move at 1.5 m/s.

Elementy na płytce 32U4 robota 3pi plus


Elements on 32U4 PCB of 3pi plus robot.

Equipment of the 3pi+ robot

The pololu robot is based on a motherboard of9.7 cmdiameter withATmega32U4chip. The board is equipped withmicroUSBconnector for programming the board andArduinocompatible bootloader. In order to program the board, usemicroUSB to USB cable(not included). The robot can be programmed inArduino IDEenvironment using available libraries and sample codes for Arduino. Additional ports, designed for more advanced users, allow to connect additional accessories. The board also includesan H-bridgeandencodersfor controlling DC motors, as well as a 3-axis accelerometer, gyroscope and magnetometer, 5 IR reflective sensors for detecting surface edges and a right and left collision sensor. Three buttons for any user use, LCD display, buzzer and status LEDs.

What do I need to get started with the robot?

  • Four AAA batteries - the robot works with alkaline and rechargeable Ni-MH batteries, the manufacturer recommends the use of rechargeableNi-MH batteries.
  • MicroUSB cable- required to connect the robot with the computer, for programming and debugging purposes.

Elements included in the kit

Zawartość zestawu robota 3pi+ Standard Edition


Contents of the 3pi+ Standard Edition robot kit.

Robota 3pi+ Standard Edition

3pi+ Standard Edition robot.

3pi+ Standard Edition robot specification

  • Motor: DC HPCB 6 V 30:1 720 rpm
  • Robot movement speed: 1.5 m/s
  • Chip: ATmega32U4
  • Dimensions: 97 x 96 x 36 mm
  • Weight: 100 g
Chassis - wheels 2
Chassis - type wheel
Chassis + drive yes
Chassis + driver: yes

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: