















Polol's miniature 100:1 high power motor with a gearbox, 320 rpm, 2.2 kg*cm (0.215 Nm) torque.
Supply voltage: |
3 V - 9 V |
Unloaded current (6 V): |
80 mA |
Current at stopped shaft (6 V): |
1600 mA |
Speed without load (6 V): |
320 rpm |
Torque (6 V): |
2.2 kg*cm (0.215 Nm) |
Gear ratio: |
100:1 |
Shaft diameter: |
3 mm |
Body dimensions: |
24 x 10 x 12 mm |
The weight: |
10 g |
Two-sided shaft: |
NO |
Polol's small, lightweight yet powerful engines are used by robot constructors as driving units. The devices can be supplied with voltage up to 9 V, the useful power is over 3 V. The optimum voltage at which the power to strength ratio is best is 6 V.
The motor body is a 24 x 10 x 12 mm cuboid. The gearbox is 9.27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.
We offer a range of accessories that work with Polol's micro motors:
The film from the final run The winning module The robot we have made is equipped with Polol HP micro motors with 10:1 gearbox.
Useful links |
Diameter | 12 mm |
Voltage to | 3.0 V |
Voltage from | 9.0 V |
Motor - current | 80 mA |
Motor - gear | 100:1 |
Rotation speed | 320 obr/min |
Torque | 2,2 kg*cm |
Mass | 10 g |
Motor - shaft | 3 mm |
Voltage nominal | 6.0 V |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Wheels 32x7mm - black - 2pcs - Pololu 1087
Set of the plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. They are suitable for engines with Pololu gears.Extended micro motor mount - white - 2pcs - Pololu 1089
Extended mounts for the Pololu micro motors. The price is for the two pieces.Wheel 60x8mm - black - 2pcs. - Pololu 1420
Set of plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. Suitable for engines with Pololu gears.Wheel 32x7 mm - white - 2 pieces - Pololu 1088
Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. Suitable for engines with Pololu gears.TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713
Polol module with a two-channel direct current motor controller. It is powered from 4.5 V to 13.5 V. Continuous current per channel is 1 A, with both channels connected the...Micro Motor Mount - black - 2pcs. - Pololu 989
Black Polol micro motor mounts in black. Price for two pieces.L298N - two-channel motor driver
Two-channel bridge H. Supply voltage: max. 46 V. Maximum instantaneous current 2 A. Enclosure: Multiwatt15 (THT).TB6612FNG - two-channel motor controller
Two-channel bridge H. Continuous current per channel 1.2 A temporary to 3.2 A. Supply voltage up to 15 V. SSOP-24 (SMD) housing.Customers who bought this product also bought:
Sharp GP2Y0D810Z0F - digital distance sensor 10cm - Pololu 1135
Digital distance sensor Sharp GP2Y0D805Z0F to detect objects at a distance of up to 10 cm.DC Motor 120:1 120RPM - angular - Pololu 1124
Small plastic motor with 120:1, 120 rpm, torque 1.4 kg*cm (0.137 Nm). The motor can be an alternative to Polol micro motors.Battery holder for 4 AA (R6) batteries with cover and switch
Basket with cover and switch for four AA batteries (large fingers).Battery holder - 3 x AA (R6) with cover and switch
Basket with cover and switch for three AA batteries (large fingers).25Dx48L HP Motor with 4.4:1 Gear 6V 2220RPM - Pololu 1570
Polol's 4.4:1 gearbox engine generates 2150 rpm, torque is 1.5 kg*cm (0.14 Nm). Powered by 6 V, average current consumption is approximately 550 mA (max 6500 mA).Aluminum mounting hub for 25D motors - 2pcs.
Aluminium lightweight mountings for Polol type 25D motors.Ball Caster 3/8'' - plastic - Pololu 950
Lightweight plastic ball in the bowl with a diameter of 3/8 inches, it is used to support the front of the two-wheeled robot.VNH3SP30 - 36V / 30A motor driver
Single-channel bridge H. Supply voltage: max. 36 V. Continuous current 9 A, instantaneous 30 A. Housing: SO-30 Multipower.QTR-8A reflectance sensor array- analog - Pololu 960
Strap of the eight reflecting sensors with analog outputs. It is powered with the voltage of 5 V or 3.3 V.HP Motor with 150:1 Gear - Pololu 997
Polol's miniature 150:1 high power motor with a gearbox, 200 rpm, 2.9 kg*cm (0.284 Nm) torque.CNY70 reflective optocoupler sensor
Reflective optocoupler used, for example, to distinguish the edges or for line detection. Case dimensions - 7 x 7 x 6 mm,through hole installation.L293D - two-channel 36V / 0,6A motor driver - 5pcs
Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...Products from the same category
HP Motor with 50:1 Gear - doublesided shaft - Pololu 2213
Polol's miniature 50:1 high power motor with a 630 rpm gearbox, torque is 1.1 kg*cm (0.107 Nm). It has an extended shaft for mounting speed sensors.Micro metal gearmotor HP 10:1 3000RPM - Pololu 999
Polol's miniature 10:1 high power motor with a gearbox, 3000 rpm, 0.22 kg*cm (0.021 Nm) torque.Micro metal gearmotor HP 50:1 630RPM - Pololu 998
Polol's miniature 50:1 high power motor with a 630 rpm gearbox, torque is 1.1 kg*cm (0.107 Nm).Micro metal gearmotor HP 298:1 100RPM - Pololu 994
Polol's miniature high-power motor with 298:1 gearbox, 100 rpm, 5.0 kg*cm (0.490 Nm) torque.HP motor 5:1 Gear - Pololu 1000
Polol's miniature 5:1 high power motor with a 5:1 gearbox, 6000 rpm, 0.1 kg*cm (0.009 Nm) torque.HP Motor with 10:1 Gear - doublesided shaft - - Pololu 2211
Polol's miniature 10:1 high power motor with a gearbox, 3000 rpm, 0.3 kg*cm (0.029 Nm) torque. It has an extended shaft for mounting speed sensors.HP Motor with 100:1 Gear - doublesided shaft - Pololu 2214
Polol's miniature 100:1 high power motor with a gearbox, 320 rpm, 2.2 kg*cm (0.215 Nm) torque. It has an extended shaft for mounting speed sensors.Micro Gearmotor HP 30:1 1000RPM with Extended Motor Shaft - Pololu 2212
Polol's miniature 30:1 high power motor with a gearbox, 1000 rpm, 0.57 kg*cm (0.056 Nm) torque. It has an extended shaft for mounting speed sensors.HP Motor with 298:1 Gear - doublesided shaft - Pololu 2218
Polol's miniature high-power motor with 298:1 gearbox, 100 rpm, 5.0 kg*cm (0.490 Nm) torque. It has an extended shaft for mounting speed sensors.HP Motor with 210:1 Gear - Pololu 996
Polol's miniature 210:1 high-power motor with a gearbox, 140 rpm, 3.6 kg*cm (0.353 Nm) torque.HP Motor with 75:1 Gear - Pololu 2361
Polol's miniature high-power motor with a 75:1 gearbox, 400 rpm, 1.6 kg*cm (0.156 Nm) torque.HP Motor with 150:1 Gear - doublesided shaft - Pololu 2386
Polol's miniature high-power motor with 150:1 gearbox, 200 rpm, 2.9 kg*cm (0.28 Nm) torque. It has an extended shaft for mounting speed sensors.