• EOL

HPCB motor with 15:1 gear - 6V - Pololu 4786

Index: PLL-15972

Polol's miniature HPCB engine with durable carbon brushes. The motor has a 15:1 gearbox, a speed of 2100 rpm and a torque of 0.25 kg*cm (0.024 Nm). The motor has a 6-volt power supply, consumes 100mA of current during no-load operation and up to 1.5A when the shaft is stopped.

HPCB motor with 15:1 gear - 6V - Pololu 4786
€16.50
€13.41 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Pololu

Attention!

The product has been discontinued. Check other products incategory.

Product description: HPCB 15:1 - 6 V motor

Polol'sminiature HPCB enginewithdurable carbon brushes. The motor has a 15:1 gearbox, a speed of 2100 rpm and atorqueof 0.25 kg*cm(0.024 Nm).The motor has a6-voltpower supply, consumes100mA ofcurrent duringno-loadoperation and up to1.5Awhen the shaft is stopped.

This version has carbon brushes with increased strength.

Porównanie silników HPCB i HP

Polol HPCB motors with carbon brushes on the left, motor with metal brushes on the right.

Motor dimensions 15:1

Polol's miniature HPCB motor has a 26 x 10 x 12 mm body. Gearbox length is 10 mm. There is a 3 mm D-shaped shaft at the output. Total weight is about 9,5 g.

Wymiary micro silnika Pololu

The figure shows the dimensions of the Polol HPCB micro motor with gearbox.

Motor accessories

We offer a range of accessories that work with Polol's micro motors:

Mocowania silników

  • Wheels, crawlers,hubs, encoders
    Our
    offer also includes wheels and crawlers, matched to the shafts of Polol'smicromotors. There is also a special version of wheels with speed measurement - encoders. Installation of non-standard wheels is facilitated by adapters.

Koła silników Pololu


Sterowniki silników

Film from the final run of thewinningconstruction called Impact at the T-BOT 2013 Robot Tournament. Our robot has Polol HP micro motors with 10:1 transmission.

Pololu 999

There are also many otherenginesin our offer.

Polol HPCB engine specification 15:1

Specification .

Supply voltage

6 V

no-load current

100 mA

Current at the stopped rampart

1500 mA

Unloaded speed

2100 rpm

Torque

0.25 kg*cm (0.024 Nm)

Translation

15:1

Shaft diameter

3 mm

Body dimensions

26 x 10 x 12 mm

Mass

9,5 g

Double-sided shaft

No

Diameter 12 mm
Length 26 mm
Width 10 mm
Voltage to 6.0 V
Voltage from 6.0 V
Motor - current 100 mA
Motor - gear 15:1
Rotation speed 2100 obr/min
Torque 0.25 kg*cm
Mass 10 g
Motor - shaft 3 mm
Voltage nominal 6.0 V
Package width 3.54 cm
Package height 1.2 cm
Package depth 1 cm
Package weight 0.01 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: