5:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft - Pololu 3047

Index: PLL-06876 EAN: 5904422367756

Polol' s miniature high power engine with durable carbon brushes. It has a 5:1 transmission, speed is 6000 rpm, torque is 0.1 kg*cm (0.01 Nm). It has an extended shaft for mounting speed sensors.

5:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft - Pololu 3047
€25.50
€20.73 tax excl.
Waiting time: 4-6 weeks
Only on request
PayPal payment
Manufacturer: Pololu

Product description: HPCB 5:1 12 V motor, double-sided shaft - Polol 3047

Polol's small, lightweight yet powerful engines are used as drive units by robot constructors. The optimum voltage at which the power to strength ratio is most favourable is 12 V. This version has an extended shaft with a length of 5.0 mm, allowing the installation ofspeed sensors - encoders.

This version has carbon brushes with increased strength and a shaft on both sides for mountingthe encoders.

Motor dimensions

The motor body is a 26 x 12 x 10 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 9,5 g.

The drawing shows the dimensions of the Polol micro motor with gearbox.

Accessories

We offer a range of accessories that work with Polol's micro motors:

  • Mountings
    Special mountings in whiteorblack have been designed for mounting motors.There is also anextendedversion available and made ofaluminumwith increased strength.

 

  • Wheels,crawlers,hubs,encoders
    Our offer also includeswheelsandcrawlers, matched to the shafts of Polol's micro motors. There is also a special version of wheels with speed measurement - encoders. Installation of non-standard wheels is facilitated byadapters.

There are also many othermotorsin the shop's offer.

Specification

Power supply voltage:

12 V

Non load current (12 V):

100 mA

Current at stopped shaft (12 V):

800 mA

Speed without load (12 V):

6000 rpm

Torque (12 V):

0.1 kg*cm (0.01 Nm)

Gear ratio:

4,995:1

Brushes:

Carbon brushes, high strength

Shaft diameter:

3 mm

Body dimensions:

26 x 12 x 10 mm

The weight:

9,5 g

Two-sided shaft:

YES

Length 26 mm
Voltage to 3.0 V
Voltage from 9.0 V
Motor - gear 5:1
Rotation speed 6000 obr/min
Torque 0.1 kg*cm
Mass 10 g
Motor - shaft 3 mm
Motor - 2x shaft yes
Voltage nominal 6.0 V
Package width 5 cm
Package height 1 cm
Package depth 8 cm
Package weight 0.01 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: