Product description: Polyol engine 30:1
Polol's small, lightweight yet powerful motors are used by robot constructors as driving units. The units can be supplied with voltage up to 9 V, the useful power is over 3 V. The optimum voltage at which the power to strength ratio is best is 6 V.
Motor dimensions
The motor body is a 24 x 10 x 12 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.
The drawing shows the dimensions of the Polol micro motor with gearbox.
We offer a range of accessories that work with Polol micro motors:
- Motor controllers
Direction and speed control is provided by DC motor controllers. The offer includes both self-soldering integrated circuits and ready-to-connect, cooperating with sets (e.g. Arduino ) modules.
The film from the final run The winning module The robot we have made is equipped with Polol HP micro motors with 10:1 gearbox.
Engine specification Polol 30:1
|
Supply voltage: |
3 V - 9 V |
|
Unloaded current (6 V): |
40 mA |
|
Current at stopped shaft (6 V): |
360 mA |
|
Speed without load (6 V): |
440 rpm |
|
Torque (6 V): |
0.28 kg*cm (0.027 Nm) |
|
Gear ratio: |
30:1 |
|
Shaft diameter: |
3 mm |
|
Body dimensions: |
24 x 10 x 12 mm |
|
The weight: |
10 g |
|
Two-sided shaft: |
NO |
Useful links |
