Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine
Polyol HP 10:1 engine - zdjęcie 1
Polyol HP 10:1 engine - zdjęcie 2
Polyol HP 10:1 engine - zdjęcie 3
Polyol HP 10:1 engine - zdjęcie 4
Polyol HP 10:1 engine - zdjęcie 5
Polyol HP 10:1 engine - zdjęcie 6
Polyol HP 10:1 engine - zdjęcie 7
Polyol HP 10:1 engine - zdjęcie 8
Polyol HP 10:1 engine - zdjęcie 9
Polyol HP 10:1 engine - zdjęcie 10
Polyol HP 10:1 engine - zdjęcie 11
Polyol HP 10:1 engine - zdjęcie 12

Motor with 100:1 Gear - doublesided shaft - Pololu 2204

Index: PLL-00713

Polol's miniature 120:1 high-power motor with 120 rpm gearbox, torque is 0.9 kg*cm (0.088 Nm). It has an extended shaft for mounting speed sensors.

€14.88
€12.10 tax excl.

Available, 24h shipping!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: Pololu

Engine specification Polol 100:1

Supply voltage:

3 V - 9 V

Unloaded current (6 V):

40 mA

Current at stopped shaft (6 V):

360 mA

Speed without load (6 V):

120 rpm

Torque (6 V):

0.9 kg*cm (0.088 Nm)

Gear ratio:

100:1

Shaft diameter:

3 mm

Body dimensions:

24 x 10 x 12 mm

The weight:

10 g

Two-sided shaft:

YES

Product description: Polyol motor 100:1 double-sided shaft

Polol's small, lightweight yet powerful motors are used by robot constructors as driving units. The devices can be supplied with voltage up to 9 V, the useful power is over 3 V. The optimum voltage at which the power to strength ratio is best is 6 V. This version has an extended shaft with a length of 4.5 mm, which allows the installation of speed sensors - encoders .

Motor dimensions

The motor body is a 24 x 10 x 12 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.

The drawing shows the dimensions of the Polol micro motor with gearbox.

Accessories

We offer a range of accessories that work with Polol's micro motors:

  • Fixings
    For mounting the motors, special fixtures in white or black are designed . An extended version is also available , as well as an aluminum version with increased strength.

In the case of micro 1000:1 and 1000:1 HP motors, the mountings do not cover the entire transmission.

  • Wheels, crawlers , hubs, Encoders
    Our offer also includes wheels and tracks , matched to the micro engine shafts of Polol. There is also a special version of wheels with speed measuring encoders available. Installation of non-standard wheels is facilitated by adapters.

  • Engine controllers
    Direction and speed control is provided by DC motor controllers. In our offer there are both integrated circuits for self-soldering and ready to connect, cooperating with sets (e.g. Arduino ) modules.

There are many other engines in the shop's offer .

Diameter 12 mm
Length 24 mm
Voltage to 3.0 V
Voltage from 9.0 V
Motor - current 250 mA
Motor - gear 100:1
Rotation speed 120 obr/min
Torque 0.9 kg*cm
Mass 10 g
Motor - shaft 3 mm
Motor - 2x shaft yes
Voltage nominal 6.0 V

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Wheels 32x7mm - black - 2pcs - Pololu 1087

Set of the plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. They are suitable for engines with Pololu gears.
Index: PLL-00012
Index: PLL-00012
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.78 Price €2.78

Micro Motor Mount Extended - white - 2pcs - Pololu 1089

Extended mounts for the Pololu micro motors. The price is for the two pieces.
Index: PLL-00019
Index: PLL-00019
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.53 Price €4.53

Wheel 60x8mm - black - 2pcs. - Pololu 1420

Set of plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-00022
Index: PLL-00022
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.42 Price €4.42

Micro Motor Mount - black - 2pcs. - Pololu 989

Black Polol micro motor mounts in black. Price for two pieces.
Index: PLL-00036
Index: PLL-00036
Available, 24h shipping!
(Check quantity)
Regular price €3.93 Price €3.93

Pololu 1415 - set of tracked wheels 22T

The set includes two pieces of caterpillar belts with 22 teeth each, two drive wheels and two loose-running wheels and their attachment components.
Index: PLL-00150
Index: PLL-00150
Unavailable
Regular price €12.09 Price €12.09

VNH5019 - single-channel 24V / 12A engine controller - Pololu - 1451

Module with ST VNH5019 system working with voltages from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).
Index: PLL-00456
Index: PLL-00456
Available, 24h shipping!
(Check quantity)
Regular price €22.33 Price €22.33

TB6612FNG - two-channel motor controller

Two-channel bridge H. Continuous current per channel 1.2 A temporary to 3.2 A. Supply voltage up to 15 V. SSOP-24 (SMD) housing.
Index: UCC-00495
Index: UCC-00495
Available, 24h shipping!
(Check quantity)
Regular price €2.03 Price €2.03

AS5040 Magnetic Encoder

AS5040 non-contact magnetic encoder in a small form factor with 3 different modes of operation.
Index: SES-00663
Index: SES-00663
Unavailable
Regular price €11.37 Price €11.37

Customers who bought this product also bought:

Set of resistors SMD 0603 - 800pcs.

A set of 16 resistor values with a tolerance of 5 %, 50 pieces of each. The items in the SMD0603 case.
Index: PAS-00641
Index: PAS-00641
Czas oczekiwania: ok. 10-30 dni
Regular price €1.37 Price €1.37

Radio module 4-channels 315MHz + remote control

The kit includes a receiver and a transmitter in the form of a remote control with buttons. Pressing the button changes the logical state on the receiver's outputs. The system...
Index: MOD-01733
Index: MOD-01733
Unavailable
Regular price €3.47 Price €3.47

Optical encoder set for Pololu micro motors - 5V version - 2 pcs - Pololu 2590

A pair of optical quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the sensor and the plastic impeller kit, it allows...
Index: PLL-01879
Index: PLL-01879
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.12 Price €8.12

Wheel 32x7 mm - white - 2 pieces - Pololu 1088

Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-00031
Index: PLL-00031
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.91 Price €2.91

CNY70 reflective optocoupler sensor

Reflective optocoupler used, for example, to distinguish the edges or for line detection. Case dimensions - 7 x 7 x 6 mm,through hole installation.
Index: UCC-00052
Index: UCC-00052
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.69 Price €0.69

Ball Caster 3/8'' - metal - Pololu 951

Metal ball in the bowl with a diameter of 3/8 inch. It is ideal to use to support the front of the two-wheeled robot.
Index: PLL-00063
Index: PLL-00063
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.92 Price €1.92

L293D - two-channel 36V / 0.6A motor driver - 5pcs

Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...
Index: UCC-00176
Index: UCC-00176
Available, 24h shipping!
(Check quantity)
Regular price €2.07 Price €2.07

Stand for DIP16 - 5pcs.

Stand for chip DIP 16 pin. Price for 5 pieces.
Index: UCC-00185
Index: UCC-00185
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.35 Price €0.35

Slide switch ESP2010 - angled

Slide switch, angled, to print with the size of 10 x 2.5 x 6.5 mm. Pins pitch: 2.54 mm.
Index: UCC-00256
Index: UCC-00256
Czas oczekiwania: ok. 10-30 dni
Regular price €0.77 Price €0.77

LCD display 2x8 characters blue

Character maker: CBC008002E01-MIW. Backlight: blue. Character color: white.
Index: LCD-00393
Index: LCD-00393
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.47 Price €3.47

Servo TowerPro SG-90 - micro - 180 degrees

Servo type micro. Speed: 0.1 sec/60 ° . Torque: 1.8 kg*cm Dimensions: 22 x 12 x 27 mm. Weight: 9 g.
Index: MOT-00484
Index: MOT-00484
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.79 Price €1.79

Dualsky 220mAh 25C 7.4V

A powerful Dualsky lithium-polymer battery. Discharge current: continuous 25 C (5.5 A), instantaneous up to 50 C (11 A). Dimensions 39 x 18 x 13 mm. Weight 16 g.
Index: AKU-00565
Index: AKU-00565
Unavailable
Regular price €5.33 Price €5.33

RandomCategoryProducts

Motor with 5:1 Gear - Pololu 1100

Pololu's miniature low-power 5:1 gearmotor with 2500 rpm, 0.07 kg*cm (0.007 Nm) torque.
Index: PLL-00705
Index: PLL-00705
Waiting time approx. 10-21 days
Regular price €14.88 Price €14.88

Motor with 100:1 Gear - Pololu 992

Polol's miniature low-power 100:1 gearmotor with 120 rpm, 0.9 kg*cm (0.882 Nm) torque.
Index: PLL-00706
Index: PLL-00706
Available, 24h shipping!
(Check quantity)
Regular price €14.86 Price €14.86

Motor with 10:1 Gear - Pololu 1099

Polol's miniature low-power 5:1 gearmotor , 1300 rpm, 0.14 kg*cm (0.013 Nm) torque.
Index: PLL-00707
Index: PLL-00707
Waiting time approx. 10-21 days
Regular price €11.62 Price €11.62

Motor with 50:1 Gear - Pololu 1098

Polol's miniature low-power 50:1 gearmotor with 250 rpm, 0.5 kg*cm (0.049 Nm) torque.
Index: PLL-00709
Index: PLL-00709
Available, 24h shipping!
(Check quantity)
Regular price €15.09 Price €15.09

Motor with 50:1 Gear - doublesided shaft - Pololu 2203

Polol's miniature low-power 50:1 gearmotor with 250 rpm, 0.5 kg*cm (0.049 Nm) torque. It has an extended shaft for mounting speed sensors.
Index: PLL-00710
Index: PLL-00710
Waiting time approx. 10-21 days
Regular price €16.26 Price €16.26

Motor with 150:1 Gear - Pololu 1097

Polol's miniature low-power 150:1 gearmotor with 85 rpm, 1.2 kg*cm (0.117 Nm) torque.
Index: PLL-00714
Index: PLL-00714
Available, 24h shipping!
(Check quantity)
Regular price €13.47 Price €13.47

Motor with 250:1 Gear - Pololu 1095

Polol's miniature 250:1 high power motor with a 50 rpm gearbox and 2.3 kg*cm (0.225 Nm) torque.
Index: PLL-00717
Index: PLL-00717
Available, 24h shipping!
(Check quantity)
Regular price €14.42 Price €14.42

Motor with 298:1 Gear - doublesided shaft - Pololu - 2208

Polol's miniature high-power motor with 298:1 gearbox, 45 rpm, 2.9 kg*cm (0.284 Nm) torque. It has an extended shaft for mounting speed sensors.
Index: PLL-00718
Index: PLL-00718
Available, 24h shipping!
(Check quantity)
Regular price €15.79 Price €15.79

Motor with 210:1 Gear - Pololu 1096

Polol's miniature 210:1 low-power series motor with a gearbox, 60 rpm, 1.9 kg*cm (0.186 Nm) torque.
Index: PLL-00729
Index: PLL-00729
Available, 24h shipping!
(Check quantity)
Regular price €15.56 Price €15.56

DFRobot Motor with 75:1 Gear 220RPM /0,07Nm with connector and wires

DFRobot's miniature 75:1 gearmotor has 220 rpm , 0.8 kg*cm (0.07 Nm) torque. The motor has a connector attached for easy connection. The necessary connection cables are...
Index: DFR-05963
Index: DFR-05963
Waiting time: about 10-30 days
Regular price €12.56 Price €12.56

Micro metal gearmotor 298:1 45RPM - Pololu 1094

Polol's miniature low-power motor with 298:1 gearbox, 45 rpm, 2.9 kg*cm (0.284 Nm) torque.
Index: PLL-00117
Index: PLL-00117
Available, 24h shipping!
(Check quantity)
Regular price €15.70 Price €15.70

Motor with 30:1 Gear - doublesided shaft - Pololu 2202

Polol's miniature low-power 30:1 gearmotor with 440 rpm, 0.3 kg*cm (0.029 Nm) torque. It has an extended shaft for mounting speed sensors.
Index: PLL-00704
Index: PLL-00704
Available, 24h shipping!
(Check quantity)
Regular price €15.93 Price €15.93